Warning, /utilities/krusader/doc/handbook/viewer-editor.docbook is written in an unsupported language. File is not indexed.

 <!--
     SPDX-FileCopyrightText: 2000-2003 Shie Erlich <erlich@users.sourceforge.net>
     SPDX-FileCopyrightText: 2000-2003 Rafi Yanai <yanai@users.sourceforge.net>
     SPDX-FileCopyrightText: 2004-2010 Frank Schoolmeesters <codeknight@users.sourceforge.net>
     SPDX-FileCopyrightText: 2000-2022 Krusader Krew <https://krusader.org>
 -->
 <sect1 id="krviewer">
   <title>KrViewer: &krusader;'s internal
   viewer-editor</title>
   <indexterm>
     <primary>Viewer</primary>
     <seealso>Editor</seealso>
   </indexterm>
   <para>Pressing &Enter; on a selected file
   <emphasis>opens the file with the associated
   application</emphasis>. The editor-viewer is tabbed, configure it
   on the <link linkend="konfig-general">Konfigurator General page</link></para>
   <sect2 id="krview">
     <title>Viewer</title>
     <para>To view a file as fast as possible according to its type,
     just put it under the cursor and press
     <keycap>F3</keycap>. &krusader;'s internal viewer is
     actually a part of &konqueror;, which can basically
     view every file type viewable by &konqueror;
     (&eg; display pictures, play music, show the content
     of an archive). This is called the 'Generic viewer', for which
     you need to configure the &MIME; types.</para>
     <para>The viewer works as follows:
     <itemizedlist>
       <listitem>
         <para>It tries to view the file with the
         <emphasis>'Generic viewer'.</emphasis></para>
       </listitem>
       <listitem>
         <para>When the file type (&MIME; type) cannot be determined or
         when a file (&eg; a binary) does not have an
         associated action, it disables the 'generic viewer'. The
         file is treated as a text file, which is the
         <emphasis>'Text viewer'</emphasis>.</para>
       </listitem>
       <listitem>
         <para>The user can change in the
         <link linkend="kredit_krviewer_menu">KrViewer
         menu</link> between: 'Generic viewer' (if available), 'Text
         viewer' and
         <emphasis>'Hex viewer'</emphasis>.</para>
       </listitem>
     </itemizedlist>You can configure the default viewer mode on the
     <link linkend="konfig-general">Konfigurator General page</link> .</para>
     <para>
     <keycombo action="simul">&Shift;
     <keycap>F3</keycap></keycombo> views a &URL; on
     demand, &eg;:
     <itemizedlist>
       <listitem>
         <para>
         <userinput>
           <command>man:/</command>
         </userinput>views the manpages.</para>
       </listitem>
       <listitem>
         <para>
         <userinput>
           <command>man:/</command><replaceable>krusader</replaceable>
         </userinput>views manpage of &krusader;.</para>
       </listitem>
       <listitem>
         <para>
         <userinput>
           <command>info:/</command>
         </userinput>views the infopages.</para>
       </listitem>
       <listitem>
         <para>
         <userinput>
           <command>https://</command><replaceable>krusader.org</replaceable>
         </userinput>views a webpage.</para>
       </listitem>
       <listitem>
         <para>
         <userinput>
           <command>ftp://</command><replaceable>ftp.kde.org/pub/kde/</replaceable>
         </userinput>views a &FTP; server.</para>
       </listitem>
       <listitem>
         <para>
         <userinput>
           <command>sftp://</command><replaceable>sftp.foo/</replaceable>
         </userinput>views a secure &FTP; server.</para>
       </listitem>
       <listitem>
         <para>
         <userinput>
           <command>file:/</command><replaceable>home/frank</replaceable>
         </userinput>views Frank's home folder.</para>
       </listitem>
       <listitem>
         <para>
         <userinput>
           <command>tar:/</command><replaceable>home/frank/archive.tar.gz/</replaceable>
         </userinput>opens content browser window for the
         <literal role="extension">tar.gz</literal> archive.</para>
       </listitem>
     </itemizedlist></para>
     <para>KrViewer can have the following menus:
     <link linkend="katepart-menu-file">File</link>,
     <link linkend="katepart-menu-edit">Edit</link>,
     <link linkend="katepart-menu-view">View</link>,
     <link linkend="katepart-menu-settings">Settings</link> and
     <link linkend="kredit_krviewer_menu">Krviewer</link>, depending
     on which file type is viewed. They will be discussed in the
     <link linkend="kredit">Editor section</link>. The internal
     viewer can follow links on &HTML; pages. With
     <keycombo action="simul">&Ctrl;&Shift;
     <keycap>E</keycap></keycombo> the viewer can start
     &krusader;'s internal editor (which is basically the
     same application).</para>
     <note>
       <para>The embedded viewer is not written by us, it is
       supplied via &kde-frameworks; and
       KIO Slaves. We cannot and do not want to
       change it, using these libraries reduces the amount of
       written code. So we do not have to reinvent the wheel
       ;-)</para>
     </note>
   </sect2>
   <sect2 id="kredit">
     <title>Editor</title>
     <indexterm>
       <primary>Editor</primary>
     </indexterm>
     <para>&krusader;'s internal editor has almost
     everything that you can expect of an editor. Editing is similar
     to viewing but with the
     <keycap>F4</keycap> key. The default editor is
     &krusader;'s internal editor. You can change the
     default editor in the <link linkend="konfig-general">Konfigurator General page</link>, if you
     prefer to use an external editor.</para>
     <tip>
       <para>When you use &krusader;'s internal editor
       for the first time, it is recommended to look at each section
       of the
       <link linkend="katepart-menu-settings">Settings</link> menu, and
       configure it the way you want it.</para>
     </tip>
   </sect2>
   <sect2 id="kredit_menus">
     <title>Menu overview</title>
 
 <!--mostly brought in from kwrite-->
 <para>There are different menus and menu items in simple and advanced mode.
 The advanced mode is enabled by checking the option <link linkend="katepart-appearance">
 Enable power user mode (&kde; 3 mode)</link>
 on the <guilabel>Appearance</guilabel> page in &kappname;s settings.</para>
 
 <sect3 id="katepart-menu-file">
 <title>The File Menu</title>
 
 <variablelist>
 
 <varlistentry>
 <term id="katepart-menu-save">
 <menuchoice>
 <shortcut>
 <keycombo action="simul">&Ctrl;<keycap>S</keycap></keycombo>
 </shortcut>
 <guimenu>File</guimenu>
 <guimenuitem>Save</guimenuitem>
 </menuchoice>
 </term>
 <listitem>
 <para>
 This saves the current document.  If there has already been a save of
 the document then this will overwrite the previously saved file without
 asking for the user's consent.  If it is the first save of a new
 document the save as dialog (described below) will be invoked.
 </para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term id="katepart-menu-save-as">
 <menuchoice>
 <guimenu>File</guimenu>
 <guimenuitem>Save As...</guimenuitem>
 </menuchoice>
 </term>
 <listitem>
 <para>
 This allows a document to be saved with a new file name.
 </para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term id="katepart-menu-reload">
 <menuchoice>
 <shortcut>
 <keycombo action="simul"><keycap>F5</keycap></keycombo>
 </shortcut>
 <guimenu>File</guimenu>
 <guimenuitem>Reload</guimenuitem>
 </menuchoice>
 </term>
 <listitem>
 <para>
 Reloads the active file from disk. This command is useful if another program or
 process has changed the file while you have it open in &kappname;.
 </para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term id="katepart-menu-print">
 <menuchoice>
 <shortcut>
 <keycombo action="simul">&Ctrl;<keycap>P</keycap></keycombo>
 </shortcut>
 <guimenu>File</guimenu>
 <guimenuitem>Print...</guimenuitem>
 </menuchoice>
 </term>
 <listitem>
 <para>
 Opens a simple print dialog allowing the user to specify what, where,
 and how to print.
 </para>
 </listitem>
 </varlistentry>
 
 <varlistentry> <!-- from plugin Exporter -->
 <term id="katepart-menu-export-as-html">
 <menuchoice>
 <guimenu>File</guimenu>
 <guimenuitem>Export as &HTML;</guimenuitem>
 </menuchoice>
 </term>
 <listitem>
 <para>
 Export your file in &HTML; format so your document can be viewed as a web page.
 This item is only displayed when the plugin <guilabel>Exporter</guilabel> is loaded.
 </para>
 </listitem>
 </varlistentry>
 
 </variablelist>
 
 </sect3>
 
 <sect3 id="katepart-menu-edit"> <!-- This is also valid for kates menu edit-->
 <title>The Edit Menu</title>
 
 <variablelist>
 <varlistentry>
 <term id="katepart-menu-undo"><menuchoice>
 <shortcut><keycombo
 action="simul">&Ctrl;<keycap>Z</keycap></keycombo></shortcut>
 <guimenu>Edit</guimenu>
 <guimenuitem>Undo</guimenuitem></menuchoice></term>
 <listitem>
 <para>This is used to eliminate or reverse the most recent user action
 or operation.
 </para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><anchor id="katepart-menu-redo"/><menuchoice>
 <shortcut><keycombo
 action="simul">&Ctrl;&Shift;<keycap>Z</keycap></keycombo></shortcut>
 <guimenu>Edit</guimenu><guimenuitem>Redo</guimenuitem></menuchoice></term>
 <listitem>
 <para>This will reverse the most recent change (if any) made using Undo</para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><anchor id="katepart-menu-cut"/><menuchoice>
 <shortcut><keycombo
 action="simul">&Ctrl;<keycap>X</keycap></keycombo></shortcut>
 <guimenu>Edit</guimenu><guimenuitem>Cut</guimenuitem></menuchoice></term>
 <listitem>
 <para>This command deletes the current selection and places it on the
 clipboard.
 The clipboard is a feature that works invisibly to provide a way to
 transfer data between applications.</para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><anchor id="katepart-menu-copy"/><menuchoice>
 <shortcut><keycombo
 action="simul">&Ctrl;<keycap>C</keycap></keycombo></shortcut>
 <guimenu>Edit</guimenu><guimenuitem>Copy</guimenuitem></menuchoice></term>
 <listitem>
 <para>This copies the currently selected text to the clipboard so that it may
 be pasted elsewhere. The clipboard is a feature that works invisibly
 to provide a way to transfer data between applications.</para>
 </listitem>
 </varlistentry>
 <varlistentry>
 <term><anchor id="katepart-menu-paste"/><menuchoice>
 <shortcut><keycombo
 action="simul">&Ctrl;<keycap>V</keycap></keycombo></shortcut>
 <guimenu>Edit</guimenu><guimenuitem>Paste</guimenuitem></menuchoice></term>
 <listitem>
 <para>This will insert the contents of the clipboard at the cursor position.
 The clipboard is a feature that works invisibly to provide a way to
 transfer data between applications.</para>
 </listitem>
 </varlistentry>
 <varlistentry><!-- from plugin Exporter -->
 <term><anchor id="katepart-menu-copy-as-html"/><menuchoice>
 <guimenu>Edit</guimenu><guimenuitem>Copy as
 &HTML;</guimenuitem></menuchoice></term>
 <listitem>
 <para>This copies the currently selected text to the clipboard as &HTML;.
 This item is only displayed when the plugin <guilabel>Exporter</guilabel> is loaded.
 </para>
  </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><anchor id="katepart-menu-select-all"/><menuchoice>
 <shortcut><keycombo
 action="simul">&Ctrl;<keycap>A</keycap></keycombo></shortcut>
 <guimenu>Edit</guimenu><guimenuitem>Select All</guimenuitem></menuchoice></term>
 <listitem>
 <para>This will select the entire document. This could be very useful for
 copying the entire file to another application.</para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><anchor id="katepart-menu-deselect"/><menuchoice>
 <shortcut>
 <keycombo action="simul">&Ctrl;&Shift;<keycap>A</keycap></keycombo>
 </shortcut>
 <guimenu>Edit</guimenu><guimenuitem>Deselect</guimenuitem></menuchoice></term>
 <listitem>
 <para>Deselects the selected text in the editor if any.</para>
 </listitem>
 </varlistentry>
 <varlistentry>
 <term><anchor id="katepart-menu-block-selection-mode"/><menuchoice>
 <shortcut>
 <keycombo action="simul">&Ctrl;&Shift;<keycap>B</keycap></keycombo>
 </shortcut>
 <guimenu>Edit</guimenu><guimenuitem>Block
 Selection Mode</guimenuitem></menuchoice></term>
 <listitem>
 <para>Toggles Selection Mode. When the Selection Mode is <guilabel>BLOCK</guilabel>,
 you can make vertical selections, &eg; select column 5 to 10 in lines 9 to 15.
 The status bar shows the current state of the Selection Mode, either <guilabel>BLOCK</guilabel> or
 <guilabel>LINE</guilabel>.</para>
 </listitem>
 </varlistentry>
 <varlistentry>
 <term><anchor id="katepart-menu-vi-input-mode"/><menuchoice>
 <shortcut>
 <keycombo action="simul">&Meta;&Ctrl;<keycap>V</keycap></keycombo>
 </shortcut>
 <guimenu>Edit</guimenu><guimenuitem>VI input
 Mode</guimenuitem></menuchoice></term>
 <listitem>
 <para>Switch to a vi-like, modal editing mode. This mode supports the most used commands
 and motions from vim's normal and visual mode and has an optional vi mode statusbar.
 This status bar shows commands while they are being entered, output from commands and
 the current mode.The behavior of this mode can be configured in the
 <link linkend="katepart-pref-edit-vi-input-mode">Vi Input Mode</link> section of the
 <guilabel>Editing</guilabel> page in &kappname;'s settings dialog.</para>
 </listitem>
 </varlistentry>
 <varlistentry>
 <term><anchor id="katepart-menu-overwrite-mode"/><menuchoice>
 <shortcut>
 <keycombo action="simul">&Ins;</keycombo>
 </shortcut>
 <guimenu>Edit</guimenu><guimenuitem>Overwrite
 Mode</guimenuitem></menuchoice></term>
 <listitem>
 <para>Toggles the Insert/Overwrite modes. When the mode is <guilabel>INS</guilabel>, you
 insert characters where the cursor is. When the mode is <guilabel>OVR</guilabel>, writing
 characters will replace the current characters if your cursor is positioned
 before any character. The status bar shows the current state of the Overwrite
 Mode, either <guilabel>INS</guilabel> or <guilabel>OVR</guilabel>.</para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><anchor id="katepart-menu-find"/><menuchoice>
 <shortcut><keycombo
 action="simul">&Ctrl;<keycap>F</keycap></keycombo></shortcut>
 <guimenu>Edit</guimenu><guimenuitem>Find...</guimenuitem></menuchoice></term>
 <listitem>
 <para>This opens the incremental search bar at the bottom of the editor window.
 On the left side of the bar is a button with an icon to close the bar, followed by a small text
 box for entering the search pattern.</para>
 <para>When you start entering characters of your search pattern, the search starts
 immediately. If there is a match in the text this is highlighted and the background color
 of the entry field changes to light green. If the search pattern does not match any
 string in the text, this is indicated by a light red background color of the entry field
 and <guilabel>Not found</guilabel> is displayed at the right side of the bar.</para>
 <para>Use the <guilabel>Next</guilabel> or <guilabel>Previous</guilabel> button
 to jump to the next or previous match in the document.</para>
 <para>You can choose whether the search should be case sensitive.
 Selecting <guilabel>Match Case</guilabel> will limit finds to entries that match the
 case (upper or lower) of each of the characters in the search  pattern.
 </para>
 <para>Click on the button with a green arrow icon at the right side of the incremental search bar to
 switch to the power search and replace bar.
 <!--changed in 4.5 ???
 options "Highlight all" + "From cursor" removed only "Match case" left-->
 </para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><anchor id="katepart-menu-find-again"/><menuchoice>
 <shortcut><keycombo action="simul"><keycap>F3</keycap></keycombo></shortcut>
 <guimenu>Edit</guimenu><guimenuitem>Find Next</guimenuitem></menuchoice></term>
  <listitem>
 <para>This repeats the last find operation, if any, without calling the incremental
 search bar.
 </para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term id="katepart-menu-find-previous">
 <menuchoice>
 <shortcut>
 <keycombo action="simul">&Shift;<keycap>F3</keycap></keycombo>
 </shortcut>
 <guimenu>Edit</guimenu>
 <guimenuitem>Find Previous</guimenuitem>
 </menuchoice>
 </term>
 <listitem>
 <para>
 This repeats the last find operation, if any, without calling the incremental
 search bar, and searching backwards instead of forwards through the
 document.
 </para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><anchor id="katepart-menu-replace"/><menuchoice>
 <shortcut><keycombo
 action="simul">&Ctrl;<keycap>R</keycap></keycombo></shortcut>
 <guimenu>Edit</guimenu><guimenuitem>Replace...</guimenuitem></menuchoice></term>
 <listitem>
 <para>This command opens the power search and replace bar.
 On the upper left side of the bar is a button with an icon to close the bar, followed by a small text
 box for entering the search pattern.</para>
 <para>You can control the search mode by selecting <guilabel>Plain text</guilabel>,
 <guilabel>Whole words</guilabel>, <guilabel>Escape sequences</guilabel> or
 <guilabel>Regular expression</guilabel> from the drop down box.
 </para>
 <para>If <guilabel>Escape sequences</guilabel> or <guilabel>Regular expression</guilabel> are
 selected, the <guibutton>Add...</guibutton> menuitem at the bottom of the context menu of the text boxes will be enabled
 and allows you to add escape sequences or regular expression items to the
 search or replace pattern from predefined lists.</para>
 <para>Use the <guilabel>Next</guilabel> or <guilabel>Previous</guilabel> button to jump
 to the next or previous match in the document.</para>
 <para>Enter the text to replace with in the text box labeled <guilabel>Replace</guilabel>
 and click the <guibutton>Replace</guibutton> button to replace only the highlighted text or
 the <guibutton>Replace All</guibutton> button to replace the search text in the whole document.
 </para>
 <para>You can modify the search and replace behavior by selecting different
 options at the bottom of the bar.
 Selecting <guilabel>Match Case</guilabel> will limit finds to entries that match the
 case (upper or lower) of each of the characters in the search  pattern.
 <guilabel>Selection Only</guilabel> will search and replace within the current selection only.
 The <guilabel>Find All</guilabel> button highlights all matches in the document and shows the
 number of found matches in a small popup.
 </para>
 <para>Click on the button with a green arrow icon at the right side of the power search and replace bar to
 switch to the incremental search bar.
 <!--changed in 4.5 ???
 options "Highlight all" + "From cursor" removed only "Match case" left
 -->
 </para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term id="katepart-menu-find-selected">
 <menuchoice>
 <shortcut><keycombo
 action="simul">&Ctrl;<keycap>H</keycap></keycombo></shortcut>
 <guimenu>Edit</guimenu><guimenuitem>Find Selected</guimenuitem></menuchoice></term>
 <listitem>
 <para>Finds next occurrence of selected text.</para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term id="katepart-menu-find-selected-backwards">
 <menuchoice>
 <shortcut><keycombo
 action="simul">&Ctrl;&Shift;<keycap>H</keycap></keycombo></shortcut>
 <guimenu>Edit</guimenu><guimenuitem>Find Selected Backwards</guimenuitem></menuchoice></term>
 <listitem>
 <para>Finds previous occurrence of selected text.</para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term id="katepart-menu-go-to-line">
 <menuchoice>
 <shortcut>
 <keycombo action="simul">&Ctrl;<keycap>G</keycap></keycombo>
 </shortcut>
 <guimenu>Edit</guimenu>
 <guimenuitem>Go to Line...</guimenuitem></menuchoice></term>
 <listitem>
 <para>
 This opens the goto line bar at the bottom of the window which is used to have the cursor
 jump to a particular line (specified by number) in the document.  The
 line number may be entered directly into the text box or graphically by
 clicking on the up or down arrow spin controls at the side of the text
 box. The little up arrow will increase the line number and the down
 arrow decrease it. Close the bar with a click on the button with an icon on the left side of the bar.
 </para>
 </listitem>
 </varlistentry>
 </variablelist>
 
 </sect3>
 <sect3 id="katepart-menu-view">
 <!-- This is also valid for kates menu view, but kate does not have the New Window item -->
 <title>The View Menu</title>
 
 <para>The <guimenu>View</guimenu> menu allows you to manage settings
 specific to the active editor, and to manage frames.</para>
 
 <variablelist>
 
 <varlistentry>
 <term>
 <anchor id="katepart-menu-view-new-window"/>
 <menuchoice>
 <guimenu>View</guimenu>
 <guimenuitem>New Window</guimenuitem>
 </menuchoice>
 </term>
 <listitem>
 <para>Create another window containing the current document. All changes to the
 document in one window are reflected in the other window and vice versa.</para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term>
 <anchor id="katepart-menu-view-command-line"/>
 <menuchoice>
 <shortcut><keycombo
 action="simul"><keycap>F7</keycap></keycombo></shortcut>
 <guimenu>View</guimenu>
 <guimenuitem>Switch to Command Line</guimenuitem>
 </menuchoice>
 </term>
 <listitem>
 <para>Displays the Katepart command line at the bottom of the window.
 In the command line, type <userinput>help</userinput> to get help and <userinput>help list</userinput>
 to get a list of commands.</para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><menuchoice>
 <guimenu>View</guimenu><guimenuitem>Show the Javascript Console</guimenuitem>
 </menuchoice></term>
 <listitem><para>This opens a tool view that allows you to run Javascript code
 interactively. For more information, see
 <ulink url="help:/katepart/advanced-editing-tools-scripting.html">Extending &kate; with Scripts</ulink>
 </para></listitem>
 </varlistentry>
 
 <varlistentry>
 <term>
 <anchor id="katepart-menu-view-schema"/>
 <menuchoice>
 <guimenu>View</guimenu>
 <guisubmenu>Schema</guisubmenu>
 </menuchoice>
 </term>
 <listitem>
 <para>Select a font schema.</para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term>
 <anchor id="katepart-menu-view-dynamic-word-wrap"/>
 <menuchoice>
 <shortcut><keycombo action="simul"><keycap>F10</keycap></keycombo></shortcut>
 <guimenu>View</guimenu>
 <guimenuitem>Dynamic Word Wrap</guimenuitem>
 </menuchoice>
 </term>
 <listitem>
 <para>The text lines will be wrapped at the view
 border on the screen.</para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term>
 <anchor id="katepart-menu-view-dynamic-word-wrap-indicators"/>
 <menuchoice>
 <guimenu>View</guimenu>
 <guisubmenu>Dynamic Word Wrap Indicators</guisubmenu>
 </menuchoice>
 </term>
 <listitem>
  <para>Choose when and how the dynamic word wrap indicators should be
 displayed. This is only available if the <guilabel>Dynamic Word
 Wrap</guilabel> option is checked.</para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term>
 <anchor id="katepart-menu-view-show-static-word-wrap"/>
 <menuchoice>
 <guimenu>View</guimenu>
 <guimenuitem>Show Static Word Wrap Marker</guimenuitem>
 </menuchoice>
 </term>
 <listitem>
 <para>If this option is checked, a vertical line will be drawn at the
 word wrap column as defined in the <menuchoice>
 <guimenu>Settings</guimenu>
 <guimenuitem>Configure Editor...</guimenuitem></menuchoice> in the
 Editing tab. Please note that the word wrap marker is only drawn if you
 use a fixed pitch font.</para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term>
 <anchor id="katepart-menu-view-show-icon-border"/>
 <menuchoice>
 <shortcut><keycombo action="simul"><keycap>F6</keycap></keycombo></shortcut>
 <guimenu>View</guimenu>
 <guimenuitem>Show Icon Border</guimenuitem>
 </menuchoice>
 </term>
 <listitem>
 <para>This is a toggle item. Setting it on checked will make the Icon Border
 visible in the left side of the active editor, and vice versa. The Icon Border
 indicates the positions of the marked lines in the editor.</para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term>
 <anchor id="katepart-menu-view-show-line-numbers"/>
 <menuchoice>
 <shortcut><keycombo action="simul"><keycap>F11</keycap></keycombo></shortcut>
 <guimenu>View</guimenu>
 <guimenuitem>Show Line Numbers</guimenuitem>
 </menuchoice>
 </term>
 <listitem>
 <para>This is a toggle Item. Setting it on checked will make a pane displaying
 the line numbers of the document visible in the left border of the active
 editor, and vice versa.</para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term>
 <anchor id="katepart-menu-view-scrollbar-marks"/>
 <menuchoice>
 <guimenu>View</guimenu>
 <guisubmenu>Show Scrollbar Marks</guisubmenu>
 </menuchoice>
 </term>
 <listitem>
 <para>If this option is checked, the view will show marks on the vertical
 scrollbar. The marks are equivalent to the marks on the <link
 linkend="katepart-menu-view-show-icon-border">Icon Border</link>.</para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term>
 <anchor id="katepart-menu-view-hide-folding-markers"/>
 <menuchoice>
 <shortcut><keycombo action="simul"><keycap>F9</keycap></keycombo></shortcut>
 <guimenu>View</guimenu> <guimenuitem>Show Folding Markers</guimenuitem>
 </menuchoice>
 </term>
 <listitem>
 <para>If this option is checked, the marks for code folding will be
 shown.</para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term>
 <anchor id="katepart-menu-view-code-folding"/>
 <menuchoice>
 <guimenu>View</guimenu> <guisubmenu>Code Folding</guisubmenu>
 </menuchoice>
 </term>
 <listitem>
 <para>These options pertain to
 <ulink url="help:/katepart/advanced-editing-tools-code-folding.html">code
 folding</ulink>:</para>
 <variablelist>
 
 <varlistentry id="view-show-folding-markers">
 <term><menuchoice>
 <shortcut>
 <keycombo action="simul"><keycap>F9</keycap></keycombo>
 </shortcut>
 <guimenuitem>Show Folding Markers</guimenuitem>
 </menuchoice></term>
 <listitem><para>Toggles the display of the folding marker pane in the left
 side of the view.</para></listitem>
 </varlistentry>
 
 <varlistentry id="view-fold-current-node">
 <term><menuchoice>
 <guimenuitem>Fold Current Node</guimenuitem>
 </menuchoice></term>
 <listitem><para>Collapse the region that contains the cursor.</para></listitem>
 </varlistentry>
 
 <varlistentry id="view-unfold-current-node">
 <term><menuchoice>
 <guimenuitem>Unfold Current Node</guimenuitem>
 </menuchoice></term>
 <listitem><para>Expand the region that contains the cursor.</para></listitem>
 </varlistentry>
 
 <varlistentry id="view-fold-toplevel-nodes">
 <term><menuchoice>
 <shortcut>
 <keycombo action="simul">&Ctrl;&Shift;<keycap>-</keycap></keycombo>
 </shortcut>
 <guimenuitem>Fold Toplevel Nodes</guimenuitem>
 </menuchoice></term>
 <listitem><para>Collapse all toplevel regions in the document.
 Click on the right pointing triangle to expand all toplevel regions.</para></listitem>
 </varlistentry>
 </variablelist>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><menuchoice><guimenuitem>Enlarge Font</guimenuitem></menuchoice>
 </term>
 <listitem><para>This increases the display font size.</para></listitem>
 </varlistentry>
 
 <varlistentry>
 <term><menuchoice><guimenuitem>Shrink Font</guimenuitem></menuchoice>
 </term>
 <listitem><para>This decreases the display font size.</para></listitem>
 </varlistentry>
 </variablelist>
 
 </sect3>
 <sect3 id="katepart-menu-go"><!-- This is also valid for kates menu bookmarks-->
 <title>The Bookmarks Menu</title>
 <variablelist>
 
 <varlistentry>
 <term id="katepart-menu-set-bookmark">
 <menuchoice>
 <shortcut>
 <keycombo action="simul">&Ctrl;<keycap>B</keycap></keycombo>
 </shortcut>
 <guimenu>Bookmarks</guimenu>
 <guimenuitem>Set Bookmark</guimenuitem>
 </menuchoice>
 </term>
 <listitem>
 <para>
 Sets or removes a bookmark in the current line of the active document. (If it is
 there, it is removed, otherwise one is set).
 </para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term id="katepart-menu-clear-bookmarks">
 <menuchoice>
 <guimenu>Bookmarks</guimenu>
 <guimenuitem>Clear All Bookmarks</guimenuitem>
 </menuchoice>
 </term>
 <listitem>
 <para>
 This command will remove all the markers from the document as well as
 the list of markers which is appended at the bottom of this menu item.
 </para>
 </listitem>
 </varlistentry>
 
 <varlistentry id="katepart-menu-bookmarks-previous">
 <term><menuchoice><shortcut><keycombo action="simul">&Alt;
 &PgUp;</keycombo></shortcut>
 <guimenu>Bookmarks</guimenu><guimenuitem>Previous</guimenuitem></menuchoice>
 </term>
 <listitem><para>This will move the cursor to beginning of the first above line
 with a bookmark. The menuitem text will include the line number and the first
 piece of text on the line. This item is only available when there is a bookmark
 in a line above the cursor.</para></listitem>
 </varlistentry>
 
 <varlistentry id="katepart-menu-bookmarks-next">
 <term><menuchoice><shortcut><keycombo action="simul">&Alt;
 <keycap>PgDown</keycap></keycombo></shortcut>
 <guimenu>Bookmarks</guimenu><guimenuitem>Next</guimenuitem></menuchoice></term>
 <listitem><para>This will move the cursor to beginning of the next line with a
 bookmark. The menuitem text will include the line number and the first piece of
 text on the line. This item is only available when there is a bookmark in a line
 below the cursor.</para></listitem>
 </varlistentry>
 
 </variablelist>
 
 <para>
 At the bottom of this menu, a list of bookmarks appears if any bookmarks are
 available for this window.
 </para>
 
 </sect3>
 
 <!-- This is also valid for kates menu tools, kate has additional items:
 Pipe to Terminal, Syncronizise Terminal with Current Document, Focus Terminal at top-->
 <sect3 id="katepart-menu-tools">
 <title>The Tools Menu</title>
 
 <variablelist>
 <varlistentry>
 <term><anchor id="katepart-menu-tools-read-only"/><menuchoice>
 <guimenu>Tools</guimenu>
 <guimenuitem>Read Only Mode</guimenuitem></menuchoice></term>
  <listitem>
 <para>Set the current document to Read Only mode. This prevents any text
 addition and any changes in the document formatting.</para>
  </listitem>
 </varlistentry>
 
 <varlistentry><!-- only in power mode-->
 <term><anchor id="katepart-menu-tools-filetype"/><menuchoice>
 <guimenu>Tools</guimenu>
 <guisubmenu>Mode</guisubmenu></menuchoice> </term>
  <listitem>
 <para>Choose the filetype scheme you prefer for the active document. This
 overwrites the global filetype mode set in <menuchoice>
 <guimenu>Settings</guimenu>
 <guimenuitem>Configure
 Editor...</guimenuitem></menuchoice> in the Filetypes tab for your current
 document only.</para>
  </listitem>
 </varlistentry>
 
 <varlistentry><!-- only in power mode-->
 <term><anchor id="katepart-menu-tools-highlighting"/><menuchoice>
 <guimenu>Tools</guimenu>
 <guisubmenu>Highlighting</guisubmenu></menuchoice> </term>
  <listitem>
 <para>Choose the Highlighting scheme you prefer for the active document. This
 overwrites the global highlighting mode set in <menuchoice>
 <guimenu>Settings</guimenu>
 <guimenuitem>Configure
 Editor...</guimenuitem></menuchoice> for your current document only.</para>
  </listitem>
 </varlistentry>
 
 <varlistentry><!-- only in power mode-->
 <term><anchor id="katepart-menu-tools-indentation"/><menuchoice>
 <guimenu>Tools</guimenu>
 <guisubmenu>Indentation</guisubmenu></menuchoice> </term>
  <listitem>
 <para>Choose the style of indentation you want for your active document.
 This overwrites the global indentation mode set in <menuchoice>
 <guimenu>Settings</guimenu>
 <guimenuitem>Configure
 Editor...</guimenuitem></menuchoice> for your current document only.</para>
  </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><anchor id="katepart-menu-tools-encoding"/><menuchoice>
 <guimenu>Tools</guimenu>
 <guisubmenu>Encoding</guisubmenu></menuchoice></term>
  <listitem>
 <para>You can overwrite the default encoding set in <menuchoice>
 <guimenu>Settings</guimenu>
 <guimenuitem>Configure
 Editor...</guimenuitem></menuchoice> in the <guilabel>Open/Save</guilabel> page
 to set a different encoding for your current document. The encoding you
 set here will be only valid for your current document.</para>
  </listitem>
 </varlistentry>
 
 <varlistentry><!-- only in power mode-->
 <term><anchor id="katepart-menu-tools-end-of-line"/><menuchoice>
 <guimenu>Tools</guimenu>
 <guisubmenu>End of Line</guisubmenu></menuchoice> </term>
  <listitem>
 <para>Choose your preferred end of line mode for your active
 document. This overwrites the global end of line mode set in <menuchoice>
 <guimenu>Settings</guimenu>
 <guimenuitem>Configure
 Editor...</guimenuitem></menuchoice> for your current document only.</para>
  </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><anchor id="katepart-menu-tools-add-byte-mark-order"/><menuchoice>
 <guimenu>Tools</guimenu>
 <guisubmenu>Add Byte Mark Order (BOM)</guisubmenu></menuchoice></term>
  <listitem>
 <para>Checking this action you can explicitly add a byte order mark for unicode
 encoded documents. The byte order mark (BOM) is a Unicode character used to signal
 the endianness (byte order) of a text file or stream, for more information see
 <ulink url="https://en.wikipedia.org/wiki/Byte_Order_Mark">Byte Order Mark</ulink>.</para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><menuchoice>
 <shortcut>
 <keycombo action="simul">&Ctrl;&Space;</keycombo>
 </shortcut>
 <guimenu>Tools</guimenu>
 <guimenuitem>Invoke Code Completion</guimenuitem>
 </menuchoice> </term>
 <listitem>
 <para>Manually invoke command completion, usually by using a shortcut bound to this action.</para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><menuchoice>
 <guimenu>Tools</guimenu>
 <guimenuitem>Word Completion</guimenuitem>
 </menuchoice> </term>
 <listitem>
 <para><guimenuitem>Reuse Word Below</guimenuitem> (<keycombo action="simul">&Ctrl;
 <keycap>9</keycap></keycombo>) and <guimenuitem>Reuse Word Above</guimenuitem>
 (<keycombo action="simul">&Ctrl; <keycap>8</keycap></keycombo>) complete the
 currently typed text by searching for similar
 words backward or forward from the current cursor position. <guimenuitem>Shell
 Completion</guimenuitem> pops up a completion box with matching entries.</para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><menuchoice>
 <shortcut>
 <keycombo action="simul">&Ctrl;&Shift;<keycap>O</keycap></keycombo>
 </shortcut>
 <guimenu>Tools</guimenu>
 <guimenuitem>Automatic Spell Checking</guimenuitem>
 </menuchoice></term>
 <listitem>
 <para>When <guimenuitem>Automatic Spell Checking</guimenuitem> is enabled, wrong text
 is underlined in the document on-the-fly.</para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><anchor id="katepart-menu-Spelling..."/><menuchoice>
 <guimenu>Tools</guimenu><guimenuitem>Spelling...</guimenuitem></menuchoice>
 </term>
 
 <!--para>These options are described in the documentation for the
 <ulink url="help:/sonnet/index.html">Check Spelling Dialog</ulink>.</para
 Move / merge the following into kdelibs/doc/sonnet/index.docbook and replace it with the para above
 -->
 
 <listitem><para><action>This initiates the spellchecking program - a program
 designed to help the user catch and correct any spelling errors.</action>
 Clicking on this entry will start the checker and bring up the speller dialog
 box through which the user can control the process.  There are four settings
 lined up vertically in the center of the dialog with their corresponding labels
 just to the left.  Starting at the top they are:</para>
 
 <variablelist>
 <varlistentry>
 <term><guilabel>Unknown word:</guilabel></term>
 <listitem><para>Here, the spellchecker indicates the word currently under
 consideration.  This happens when the checker encounters a word not in its
 dictionary - a file containing a list of correctly spelled words against which
 it compares each word in the editor.</para></listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Replace with:</guilabel></term>
 <listitem><para> If the checker has any similar words in its dictionary the
 first one will be listed here.  The user can accept the suggestion, type in his
 or her own correction, or choose a different suggestion from the next
 box.</para></listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Language:</guilabel></term>
 <listitem><para> If you have installed multiple dictionaries, here you can
 select which dictionary/language should be used.</para></listitem>
 </varlistentry>
 </variablelist>
 
 <para>On the right side of the dialog box are 6 buttons that allow the user to
 control the spellcheck process.  They are:</para>
 
 <variablelist>
 <varlistentry>
 <term><guibutton>Add to Dictionary</guibutton></term>
 <listitem><para>Pressing this button adds the <guilabel>Unknown word
 </guilabel> to the checker's dictionary. This means that in the future
 the checker will always consider this word to be correctly
 spelled.</para></listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Suggest</guilabel></term>
 <listitem><para> The checker may list here a number of possible replacements for
 the word under consideration.  Clicking on any one of the suggestions will cause
 that word to be entered in the <guilabel>Replace with</guilabel> box,
 above.</para></listitem>
 </varlistentry>
 <varlistentry>
 <term><guibutton>Replace</guibutton></term>
 <listitem><para> This button has the checker replace the word under
 consideration in the document with the word in the
 <guilabel>Replace with</guilabel> box.</para></listitem>
 </varlistentry>
 <varlistentry>
 <term><guibutton>Replace All</guibutton></term>
 <listitem><para> This button causes the checker to replace not only the current
 <guilabel>Unknown word:</guilabel> but to automatically make the same
 substitution for any other occurrences of this <guilabel>Unknown word</guilabel>
 in the document.</para></listitem>
 </varlistentry>
 <varlistentry>
 <term><guibutton>Ignore</guibutton></term>
 <listitem><para>Activating this button will have the checker move on without
 making any changes.</para></listitem>
 </varlistentry>
 <varlistentry>
 <term><guibutton>Ignore All</guibutton></term>
 <listitem><para> This button tells the checker to do nothing with the current
 <guilabel>Unknown word:</guilabel> and to pass over any other instances of
 the same word.</para> <note><para>This only applies to the current spellcheck
 run.  If the checker is run again later it will stop on this same
 word.</para></note></listitem>
 </varlistentry>
 </variablelist>
 
 <para>Three more buttons are located horizontally along the bottom of the
 spellcheck dialog.  They are:</para>
 
 <variablelist>
 <varlistentry>
 <term><guibutton>Help</guibutton></term>
 <listitem><para> This invokes the &kde; help system with the help page
 for this dialog.</para></listitem>
 </varlistentry>
 
 <varlistentry>
 <term><guibutton>Finished</guibutton></term>
 <listitem><para> This button ends the spellcheck process, and returns to the
 document.</para></listitem>
 </varlistentry>
 
 <varlistentry>
 <term><guibutton>Cancel</guibutton></term>
 <listitem><para> This button cancels the spellcheck process, all modifications
 are reverted, and you will return to your document.</para></listitem>
 </varlistentry>
 </variablelist>
 </listitem>
 </varlistentry>
 </variablelist>
 
 <variablelist>
 <varlistentry>
 <term><anchor id="katepart-menu-tools-spelling-from-cursor"/><menuchoice>
 <guimenu>Tools</guimenu>
 <guimenuitem>Spelling (from cursor)...</guimenuitem></menuchoice></term>
  <listitem>
 <para>This initiates the spellchecking program but it starts where your cursor
 is instead of at the beginning of the document.</para>
  </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><anchor id="katepart-menu-tools-spellcheck-selection"/><menuchoice>
 <guimenu>Tools</guimenu>
 <guimenuitem>Spellcheck Selection...</guimenuitem></menuchoice></term>
  <listitem>
 <para>Spellchecks the current selection.</para>
  </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><anchor id="katepart-menu-tools-change-dictionary"/><menuchoice>
 <guimenu>Tools</guimenu>
 <guimenuitem>Change Dictionary</guimenuitem></menuchoice></term>
  <listitem>
 <para>Displays a drop down box with all available dictionaries for spellchecking
 at the bottom of the editor window. This allows easy switching of the spellcheck
 dictionary &eg; for automatic spellcheck of text in different languages.</para>
  </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><anchor id="katepart-menu-cleanindent"/><menuchoice>
 <guimenu>Tools</guimenu><guimenuitem>Clean
 Indentation</guimenuitem></menuchoice></term>  <listitem>
 <para>This cleans the indentation for the current selection or for the
 line the cursor is currently in. Cleaning the indentation ensures that
 all your selected text follows the indentation mode you choose.</para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><anchor id="katepart-menu-tools-align"/><menuchoice>
 <guimenu>Tools</guimenu>
 <guimenuitem>Align</guimenuitem>
 </menuchoice></term>
 <listitem>
 <para>Causes a realign of the current line or selected lines using the
 indentation mode and indentation settings in the document.</para>
 </listitem>
 </varlistentry>
 
 <varlistentry><!-- only in power mode-->
 <term><menuchoice>
 <shortcut>
 <keycombo action="simul">&Ctrl;<keycap>D</keycap></keycombo>
 </shortcut>
 <guimenu>Tools</guimenu>
 <guimenuitem>Comment</guimenuitem>
 </menuchoice> </term>
 <listitem><para>This adds one space to the beginning of the line
 where the text cursor is located or to the beginning of any
 selected lines.</para>
 </listitem>
 </varlistentry>
 
 <varlistentry><!-- only in power mode-->
 <term><menuchoice>
 <shortcut>
 <keycombo action="simul">&Ctrl;&Shift;<keycap>D</keycap></keycombo>
 </shortcut>
 <guimenu>Tools</guimenu>
 <guimenuitem>Uncomment</guimenuitem>
 </menuchoice> </term>
 <listitem><para>This removes one space (if any exist) from the beginning of the
 line where the text cursor is located or from the beginning of any
 selected lines.</para></listitem>
 </varlistentry>
 
 <varlistentry>
 <term><menuchoice>
 <shortcut>
 <keycombo action="simul">&Ctrl;<keycap>U</keycap></keycombo>
 </shortcut>
 <guimenu>Tools</guimenu>
 <guimenuitem>Uppercase</guimenuitem>
 </menuchoice></term>
 <listitem><para>Put the selected text or the letter after the cursor in
 uppercase.</para></listitem>
 </varlistentry>
 
 <varlistentry>
 <term><menuchoice>
 <shortcut>
 <keycombo action="simul">&Ctrl;&Shift;<keycap>U</keycap></keycombo>
 </shortcut>
 <guimenu>Tools</guimenu>
 <guimenuitem>Lowercase</guimenuitem>
 </menuchoice></term>
 <listitem><para>Put the selected text or the letter after the cursor in
 lowercase.</para></listitem>
 </varlistentry>
 
 <varlistentry>
 <term><menuchoice>
 <shortcut>
 <keycombo action="simul">&Ctrl;&Alt;<keycap>U</keycap></keycombo>
 </shortcut>
 <guimenu>Tools</guimenu>
 <guimenuitem>Capitalize</guimenuitem>
 </menuchoice></term>
 <listitem><para>Capitalize the selected text or the current
 word.</para></listitem>
 </varlistentry>
 
 <varlistentry>
 <term><menuchoice>
 <shortcut>
 <keycombo action="simul">&Ctrl;<keycap>J</keycap></keycombo>
 </shortcut>
 <guimenu>Tools</guimenu>
 <guimenuitem>Join Lines</guimenuitem>
 </menuchoice></term>
 <listitem><para>Joins the selected lines, or the current line and the line below
 with one white space character as a separator. Leading/trailing white space on
 joined lines is removed in the affected ends.</para></listitem>
 </varlistentry>
 
 <varlistentry>
 <term><menuchoice>
 <guimenu>Tools</guimenu>
 <guimenuitem>Apply Word Wrap</guimenuitem>
 </menuchoice></term>
 <listitem><para>Apply static word wrapping on all the document. That means that
 a new line of text will automatically start when the current
 line exceeds the length specified by the <guilabel>Wrap words at</guilabel> option
 in the Editing tab in <menuchoice>
 <guimenu>Settings</guimenu><guimenuitem>Configure
 Editor...</guimenuitem></menuchoice></para></listitem>
 </varlistentry>
 
 </variablelist>
 <para>If the <link linkend="katepart-pref-plugins">plugin</link> Insert File is enabled, you will
 find here an additional menu item <guimenuitem>Insert File...</guimenuitem>.
 </para>
 <!-- Data Tools and Insane HTML (LE) Expansion Ctrl+. when plugins are enabled-->
 </sect3>
 
 <sect3 id="katepart-menu-settings">
 <!-- This is also valid for kates menu settings,
 only the items Show Toolbar and Show Statusbar are swapped and Configure kate is the last item-->
 <title>The Settings Menu</title>
 
 <variablelist>
 
 <varlistentry>
 <term><anchor id="katepart-menu-preferences"/><menuchoice>
 <guimenu>Settings</guimenu>
 <guimenuitem>Configure Editor...</guimenuitem> <!-- in kate Configure &kate; ... -->
 </menuchoice>
 </term>
 <listitem>
 <para>
 This menu item opens a dialog whereby several different <link
 linkend="kredit_config">settings</link> may be adjusted.
 </para>
 </listitem>
 </varlistentry>
 
 </variablelist>
 </sect3>
 
 <!--/end kwrite-->
 
   <!-- KRVIEWER menu -->
 <sect3 id="kredit_krviewer_menu">
 <title>The KrViewer Menu</title>
     <variablelist>
       <varlistentry>
         <term>
           <menuchoice>
             <shortcut>
               <keycombo action="simul">
               &Ctrl;&Shift;
               <keycap>G</keycap></keycombo>
             </shortcut>
             <guimenu>KrViewer</guimenu>
             <guimenuitem>Generic viewer</guimenuitem>
           </menuchoice>
         </term>
         <listitem>
           <para>&krusader;'s internal viewer is actually
           part of &konqueror;, which can basically view every file
           type viewable by &konqueror; (&eg;
           display pictures, play music, show the content of an
           archive).</para>
         </listitem>
       </varlistentry>
       <varlistentry>
         <term>
           <menuchoice>
             <shortcut>
               <keycombo action="simul">&Ctrl;&Shift;
               <keycap>T</keycap></keycombo>
             </shortcut>
             <guimenu>KrViewer</guimenu>
             <guimenuitem>Text viewer</guimenuitem>
           </menuchoice>
         </term>
         <listitem>
           <para>View the file in text mode.</para>
         </listitem>
       </varlistentry>
       <varlistentry>
         <term>
           <menuchoice>
             <shortcut>
               <keycombo action="simul">
               &Ctrl;&Shift;
               <keycap>H</keycap></keycombo>
             </shortcut>
             <guimenu>KrViewer</guimenu>
             <guimenuitem>Hex viewer</guimenuitem>
           </menuchoice>
         </term>
         <listitem>
           <para>View the file in hex mode.</para>
         </listitem>
       </varlistentry>
       <varlistentry>
         <term>
           <menuchoice>
             <shortcut>
               <keycombo action="simul">
               &Ctrl;&Shift;
               <keycap>L</keycap></keycombo>
             </shortcut>
             <guimenu>KrViewer</guimenu>
             <guimenuitem>Lister</guimenuitem>
           </menuchoice>
         </term>
         <listitem>
           <para>Fast text/hex viewer for huge filesizes, done by
                 <link linkend="konfig-general">Krusader lister</link>.</para>
         </listitem>
       </varlistentry>
       <varlistentry>
         <term>
           <menuchoice>
             <shortcut>
               <keycombo action="simul">
               &Ctrl;&Shift;
               <keycap>E</keycap></keycombo>
             </shortcut>
             <guimenu>KrViewer</guimenu>
             <guimenuitem>Text editor</guimenuitem>
           </menuchoice>
         </term>
         <listitem>
           <para>Edit the file in text mode.</para>
         </listitem>
       </varlistentry>
       <varlistentry>
         <term>
           <menuchoice>
             <shortcut>
               <keycombo action="simul">
               &Ctrl;&Shift;
               <keycap>D</keycap></keycombo>
             </shortcut>
             <guimenu>KrViewer</guimenu>
             <guimenuitem>Detach Tab</guimenuitem>
           </menuchoice>
         </term>
         <listitem>
           <para>Detach browsing Tab and open in a new
           window.</para>
         </listitem>
       </varlistentry>
       <varlistentry>
         <term>
           <menuchoice>
             <shortcut>
             <keycombo action="simul">
             &Ctrl;
             <keycap>Q</keycap></keycombo>
             </shortcut>
             <guimenu>KrViewer</guimenu>
             <guimenuitem>Quit</guimenuitem>
           </menuchoice>
         </term>
         <listitem>
           <para>Closes &krusader;'s viewer/editor
           window.</para>
         </listitem>
       </varlistentry>
     </variablelist>
     </sect3>
   </sect2>
 
 <!--taken from kwrite's configuring-part.docbook-->
 <sect2 id="kredit_config">
 <title>The Editor Component Configuration</title>
 <para>This group contains all pages related to the editor component of
 &kappname;. Most of the settings here are defaults, they can be overridden by
 <link linkend="katepart-pref-open-save-modes-filetypes">defining a filetype</link>,
 by <ulink url="help:/katepart/config-variables.html">Document Variables</ulink> or
 by changing them per document during an editing session.</para>
 <sect3 id="katepart-appearance"> <!-- updated to 4.7 + synced with kwrite -->
 <title>Appearance</title>
 
 <sect4 id="katepart-appearance-general">
 <title>General</title>
 
 <variablelist>
 <varlistentry>
 <term><guilabel>Dynamic Word Wrap</guilabel></term>
 <listitem>
 <para>If this option is checked, the text lines
 will be wrapped at the view border on the screen.</para>
 <variablelist>
 <varlistentry>
 <term><guilabel>Dynamic word wrap indicators (if applicable)</guilabel></term>
 <listitem><para>Choose when the Dynamic word wrap indicators
 should be displayed, either <guilabel>Off</guilabel>, <guilabel>Follow Line
 Numbers</guilabel> or <guilabel>Always on</guilabel>.
 </para></listitem></varlistentry>
 <varlistentry>
 <term><guilabel>Align dynamically wrapped lines
 to indentation depth:
 </guilabel></term>
 <listitem><para>Enables the start of dynamically wrapped
 lines to be aligned  vertically to the indentation level of the first
 line.  This can help to make code and markup more
 readable.</para><para>Additionally, this allows you to
 set a maximum width of the screen, as a percentage,
 after which dynamically wrapped lines will no longer be vertically aligned.
 For example, at 50%, lines whose indentation levels are deeper than 50% of the
 width of the screen will not have vertical alignment applied to subsequent
 wrapped lines.</para></listitem>
 </varlistentry>
 </variablelist>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><guilabel>Whitespace Highlighting</guilabel></term>
 <listitem>
 <variablelist>
 <varlistentry>
 <term><guilabel>Highlight tabulators</guilabel></term>
 <listitem><para>The editor will display a &raquo; symbol to indicate the presence
   of a tab in the text.</para></listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Highlight trailing spaces</guilabel></term>
 <listitem><para>The editor will display dots to indicate the presence of extra
 whitespace at the end of lines.</para></listitem>
 </varlistentry>
 </variablelist>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><guilabel>Advanced
 </guilabel></term>
 <listitem><para>
 <variablelist>
 <varlistentry>
 <term><guilabel>Show indentation lines
 </guilabel></term>
 <listitem><para>If this is checked, the editor will display
 vertical lines to help identifying indent lines.</para></listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Highlight range between selected brackets
 </guilabel></term>
 <listitem><para>If this is enabled, the range between the selected matching brackets will be highlighted.</para></listitem>
 </varlistentry>
 </variablelist>
 </para></listitem>
 </varlistentry>
 
 </variablelist>
 </sect4>
 
 <sect4 id="katepart-appearance-borders">
 <title>Borders</title>
 
 <variablelist>
 <varlistentry>
 <term><guilabel>Borders</guilabel></term>
 <listitem>
 <variablelist>
 <varlistentry>
 <term><guilabel>Show folding markers (if available)
 </guilabel></term>
 <listitem><para>If this option is checked, the current view will display marks
 for code folding, if code folding is available.</para></listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Show icon border
 </guilabel></term>
 <listitem><para>If this is checked, you will see an icon border on the left
 hand side. The icon border shows bookmark signs for instance.</para></listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Show line numbers
 </guilabel></term>
 <listitem><para>If this is checked, you will see line numbers on the left
 hand side.</para></listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Show scrollbar marks
 </guilabel></term>
 <listitem><para>If this option is checked the current view
 will show marks on the vertical scrollbar. These marks will
 for instance show bookmarks.</para></listitem>
 </varlistentry>
 </variablelist>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><guilabel>Sort Bookmarks Menu
 </guilabel></term>
 <listitem>
 <variablelist>
 <varlistentry>
 <term><guilabel>By creation
 </guilabel></term>
 <listitem><para>Each new bookmark will be added to the bottom,
 independently from where it is placed in the document.</para></listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>By position
 </guilabel></term>
 <listitem><para>The bookmarks will be ordered by the line
 numbers they are placed at.</para></listitem>
 </varlistentry>
 </variablelist>
 </listitem>
 </varlistentry>
 </variablelist>
 
 </sect4>
 </sect3>
 
 <sect3 id="katepart-prefcolors"><!-- checked for 4.7 + synced with kwrite -->
 <title>Fonts &amp; Colors</title>
 
 <para>This section of the dialog lets you configure all fonts and colors in
 any color scheme you have, as well creating new schemes or deleting existing
 ones. Each scheme has settings for colors, fonts and normal and highlight text
 styles.
 </para>
 
 <para>&kappname; will preselect the currently active scheme for you, if you want to
 work on a different scheme start by selecting that from the
 <guilabel>Schema</guilabel> combobox. With the <guibutton>New</guibutton> and <guibutton>Delete</guibutton>
  button you can create a new scheme or delete existing ones.</para>
 <para>At the bottom of the page you can select the <guilabel>Default schema for &kappname;</guilabel>.</para>
 
 <sect4 id="katepart-prefcolors-colors">
 <title>Colors</title>
 
 <variablelist>
 <varlistentry id="katepart-variable-prefcolors-colors-text-background">
 <term><guilabel>Text Area Background</guilabel></term>
 <listitem>
 
 <variablelist>
 
 <varlistentry id="katepart-variable-pref-colors-normal-text">
 <term><guilabel>Normal text</guilabel></term>
 <listitem><para>This is the default background for the editor area, it will be
 the dominant color on the editor area.</para></listitem>
 </varlistentry>
 
 <varlistentry id="katepart-variable-pref-colors-selected-text">
 <term><guilabel>Selected text</guilabel></term>
 <listitem><para>This is the background for selected text. The default is
 the global selection color, as set in your &plasma; color preferences.
 </para></listitem>
 </varlistentry>
 
 <varlistentry id="katepart-variable-pref-colors-current-line">
 <term><guilabel>Current line</guilabel></term>
 <listitem><para>Set the color for the current line. Setting this a bit different
 from the Normal text background helps to keep focus on the current line.
 </para></listitem>
 </varlistentry>
 
 <varlistentry id="katepart-variable-pref-colors-marks">
 <term><guilabel>Bookmark</guilabel></term>
 <listitem><para>This combobox lets you set overlay colors for various mark types.
 The color is mixed into the background color of a marked line, so that a line
 with more marks or a marked line that is current has a background that is a mix
 of more colors. The mark colors are also used if you enable display of scrollbar
 marks.</para></listitem>
 </varlistentry>
 
 </variablelist>
 </listitem>
 </varlistentry>
 
 <varlistentry id="katepart-variable-prefcolors-colors-other-elements">
 <term><guilabel>Additional Elements</guilabel></term>
 <listitem>
 <variablelist>
 <varlistentry>
 <term><guilabel>Left border background</guilabel></term>
 <listitem><para>This color is used for the marks, line numbers and folding
 marker borders in the left side of the editor view when they are displayed.
 </para></listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Line numbers</guilabel></term>
 <listitem><para>This color is used to draw the line numbers on the left side of
 the view when displayed.</para></listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Bracket highlight</guilabel></term>
 <listitem><para>This color is used to draw the background of matching brackets.
 </para></listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Word wrap markers</guilabel></term>
 <listitem><para>This color is used to draw a pattern to the left of dynamically
 wrapped lines when those are aligned vertically, as well as for the static word
 wrap marker.</para></listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Tab and space markers</guilabel></term>
 <listitem><para>This color is used to draw white space indicators when enabled.
 </para></listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Spelling mistake line</guilabel></term>
 <listitem><para>sets the color of the line that is used to indicate spelling mistakes.
 </para></listitem>
 </varlistentry>
 </variablelist>
 </listitem>
 </varlistentry>
 
 </variablelist>
 </sect4>
 
 <sect4 id="katepart-prefcolors-fonts">
 <title>Fonts</title>
 <para>
 Here you can choose the font for the schema.  You can choose from
 any font available on your system, and set a default size. A sample text
 displays at the bottom of the dialog, so you can see the effect of your choices.
 </para>
 </sect4>
 
 <sect4 id="katepart-prefcolors-normal-text-styles">
 <title>Normal Text Styles</title>
 <para>The normal text styles are inherited by the highlight text styles,
 allowing the editor to present text in a very consistent way, for example comment
 text is using the same style in almost all of the text formats that &kappname; can
 highlight.</para>
 <para>The name in the list of styles is using the style configured for
 the item, providing you with an immediate preview when configuring a style.
 </para>
 <para>Each style lets you select common attributes as well as foreground
 and background colors. To unset a background color, rightclick to use the
 context menu.</para>
 </sect4>
 
 <sect4 id="katepart-prefcolors-highlighting-text-styles">
 <title>Highlighting Text Styles</title>
 <para>Here you can edit the text styles used by a specific highlight definition.
 The editor preselects the highlight used by your current document. To work on a
 different highlight, select one in the <guilabel>Highlight</guilabel> combobox
 above the style list.
 </para>
 <para>The name in the list of styles is using the style configured for
 the item, providing you with an immediate preview when configuring a style.
 </para>
 <para>Each style lets you select common attributes as well as foreground
 and background colors. To unset a background color, rightclick to use the
 context menu. In addition you can see if a style is equal to the default style
 used for the item, and set it to that if not.</para>
 <para>You will notice that many highlights contain other highlights represented
 by groups in the style list. For example most highlights import the Alert
 highlight, and many source code formats imports the Doxygen highlight. Editing
 colors in those groups only affects the styles when used in the edited highlight
 format.
 </para>
 </sect4>
 
 </sect3>
 
 <sect3 id="katepart-pref-edit">
 <title>Editing</title>
 
 <sect4 id="katepart-pref-edit-general">
 <title>General</title>
 <variablelist>
 
 <varlistentry>
 <term id="katepart-pref-word-wrap"><guilabel>Static Word Wrap</guilabel></term>
 <listitem><para>
 Word wrap is a feature that causes the editor to automatically start a new line
 of text and move (wrap) the cursor to the beginning of that new line.  &kappname;
 will automatically start a new line of text when  the current line reaches the
 length specified by the <link linkend="katepart-pref-wrap-words-at">Wrap Words
 At:</link> option.</para>
 <variablelist>
 <varlistentry>
 <term><guilabel>Enable static word wrap</guilabel></term>
 <listitem>
 <para>Turns static word wrap on or off.</para>
 </listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Show static word wrap markers
 (if applicable)</guilabel></term>
 <listitem>
 <para>If this option is checked, a vertical line will be drawn at the word wrap
 column as defined in the <menuchoice> <guimenu>Settings</guimenu>
 <guimenuitem>Configure Editor...</guimenuitem></menuchoice> in the Editing tab.
 Please note that the word wrap marker is only drawn if you use a fixed pitch
 font.</para>
 </listitem>
 </varlistentry>
 <varlistentry>
 <term id="katepart-pref-wrap-words-at"><guilabel>Wrap words at:</guilabel></term>
 <listitem>
 <para>If the <link linkend="katepart-pref-word-wrap">Enable static word wrap</link> option is selected
 this entry  determines the length (in characters) at which the editor will
 automatically start a new line.</para>
 </listitem>
 </varlistentry>
 </variablelist>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term ><guilabel>Misc</guilabel></term>
 <listitem>
 <variablelist>
 <varlistentry>
 <term><guilabel>Remove trailing spaces while editing</guilabel></term>
 <listitem><para>&kappname; will automatically eliminate extra spaces
 at the ends of lines of text.</para></listitem> </varlistentry>
 
 <varlistentry>
 <term><guilabel>Auto brackets</guilabel></term> <listitem><para>When
 the user types a left bracket ([, (, or {) &kappname; automatically enters the
 right bracket (}, ), or ]) to the right of the cursor.</para></listitem>
 </varlistentry>
 
 <varlistentry>
 <term><guilabel>Copy/Cut the current line if no selection</guilabel></term> <listitem>
 <para>If this option is enabled and the text selection is empty, copy and cut
 action are performed for the line of text at the actual cursor position.</para></listitem>
 </varlistentry>
 
 <varlistentry>
 <term><guilabel>Allow scrolling past the end of the document</guilabel></term> <listitem>
 <para>This option lets you scroll past the end of the document. This can be used to vertically centre the bottom of the document, or put it on top of the current view.</para></listitem>
 </varlistentry>
 
 </variablelist>
 </listitem>
 </varlistentry>
 
 </variablelist>
 </sect4>
 
 <sect4 id="katepart-pref-edit-cursor-selection">
 <title>Cursor &amp; Selection</title>
 
 <variablelist>
 
 <varlistentry>
 <term><guilabel>Text Cursor Movement</guilabel></term>
 <listitem>
 <variablelist>
 <varlistentry>
 <term><guilabel>Smart home and smart end</guilabel></term>
 <listitem>
 <para>When selected, pressing the home key will cause the cursor to
 skip white space and go to the start of a line's text.</para>
 </listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Wrap cursor</guilabel></term>
 <listitem>
 <para>When on, moving the insertion cursor using the &Left; and &Right; keys will
 go on to previous/next line at beginning/end of the line, similar to most
 editors.</para><para>When off, the insertion cursor cannot be moved left of the
 line start, but it can be moved off the line end, which can be very handy for
 programmers. When this option is chosen, moving the cursor with the arrow keys
 off the end of a line (to the right) causes it to jump down to the beginning of
 the next line. Likewise when the cursor is moved past the beginning of a line
 (to the left) it jumps up to the end of the preceding line. When this option is
 not selected, moving the cursor right past the end of a line merely causes it to
 continue horizontally in the same line and trying to move it left past the
 beginning does nothing.</para>
 </listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>PageUp/PageDown moves cursor</guilabel></term>
 <listitem>
 <para>This option changes the behavior of the cursor when the user presses
 the &PgUp; or &PgDn; key. If unselected
 the text cursor will maintain its relative position within the visible text in
 &kappname; as new text becomes visible as a result of the operation.  So if the
 cursor is in the middle of the visible text when the operation occurs it will
 remain there (except when one reaches the beginning or end.)  With this option
 selected, the first key press will cause the cursor to move to either the top or
 bottom of the visible text as a new page of text is displayed.</para>
 </listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Autocenter cursor (lines):</guilabel></term>
 <listitem>
 <para>Sets the number of lines to maintain visible above and below the cursor
 when possible.</para>
 </listitem>
 </varlistentry>
 </variablelist>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><guilabel>Text Selection Mode</guilabel></term>
 <listitem>
 <variablelist>
 <varlistentry>
 <term><guilabel>Normal</guilabel></term>
 <listitem>
 <para>Selections will be overwritten by typed text and will be lost on
 cursor movement.</para>
 </listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Persistent</guilabel></term>
 <listitem>
 <para>Selections will stay even after cursor movement and typing.</para>
 </listitem>
 </varlistentry>
 </variablelist>
 </listitem>
 </varlistentry>
 
 </variablelist>
 </sect4>
 
 <sect4 id="katepart-pref-edit-indent">
 <title>Indentation</title>
 
 <variablelist>
 
 <varlistentry>
 <term><guilabel>Default Indentation mode:</guilabel></term>
 <listitem>
 <para>Select the automatic indentation mode you want to use as default. It is
 strongly recommended to use <userinput>None</userinput> or
 <userinput>Normal</userinput> here, and use filetype configurations to set other
 indentation modes for text formats like C/C++ code or &XML;.</para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><guilabel>Indent using</guilabel></term>
 <listitem>
 <variablelist>
 <varlistentry>
 <term><guilabel>Tabulators</guilabel></term>
 <listitem>
 <para>When this is enabled the editor will insert tabulator characters when you
 press the &Tab; key or use <ulink url="help:/katepart/kate-part-autoindent.html">automatic
 indentation</ulink>.</para>
 </listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Spaces</guilabel></term>
 <listitem>
 <para>When this is enabled the editor will insert a calculated number of spaces
 according to the position in the text and the <option>tab-width</option> setting
 when you press the &Tab; key or use <ulink url="help:/katepart/kate-part-autoindent.html">automatic
 indentation</ulink>.</para>
 </listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Tabulators and Spaces</guilabel></term>
 <listitem>
 <para>When this is enabled, the editor will insert spaces as describe above when
 indenting or pressing &Tab; at the beginning of a line, but insert tabulators when
 the &Tab; key is pressed in the middle or end of a line.</para>
 </listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Tab width:</guilabel></term>
 <listitem>
 <para>This configures the number of spaces that are displayed in place of a tabulator
 character.</para>
 </listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Indentation width:</guilabel></term>
 <listitem>
 <para>The indentation width is the number of spaces which is used to indent a line.
 If configured to indent using tabulators, a tabulator character is inserted
 if the indentation is divisible by the tab width.</para>
 </listitem>
 </varlistentry>
 </variablelist>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><guilabel>Indentation Properties</guilabel></term>
 <listitem>
 <variablelist>
 <varlistentry>
 <term><guilabel>Keep Extra Spaces</guilabel></term>
 <listitem><para>If this option is disabled, changing the indentation
 level aligns a line to a multiple of the width specified in
 <guilabel>Indentation width</guilabel>.</para></listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Adjust indentation of code pasted from the clipboard</guilabel></term>
 <listitem>
 <para>If this option is selected, pasted code from the clipboard is indented.
 Triggering the <guimenuitem>Undo</guimenuitem> action removes the indentation.</para>
 </listitem>
 </varlistentry>
 </variablelist>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><guilabel>Indentation Actions</guilabel></term>
 <listitem>
 <variablelist>
 <varlistentry>
 <term><guilabel>Backspace key in leading blank space unindents</guilabel></term>
 <listitem>
 <para>If this option is selected, the &Backspace; key decreases the indentation level
 if the cursor is located in the leading blank space of a line.</para>
 </listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Tab key action (if no selection exists)</guilabel></term>
 <listitem>
 <para>
 If you want &Tab; to align the current line in the current code block
 like in emacs, make &Tab; a shortcut to the action <guimenuitem>Align</guimenuitem>.
 </para>
 <variablelist>
 <varlistentry>
 <term><guilabel>Always advance to the next tab position</guilabel></term>
 <listitem>
 <para>If this option is selected, the &Tab; key always inserts white space
 so that the next tab position is reached. If the option <guilabel>Insert spaces instead of tabulators</guilabel>
 on the <guilabel>General</guilabel> tab in the <guilabel>Editing</guilabel>
 page is enabled, spaces are inserted; otherwise, a single tabulator is inserted.</para>
 </listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Always increase indentation level</guilabel></term>
 <listitem>
 <para>If this option is selected, the &Tab; key always indents the current
 line by the number of character positions specified in <guilabel>Indentation width</guilabel>.</para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><guilabel>Increase indentation level if in leading blank space</guilabel></term>
 <listitem>
 <para>If this option is selected, the &Tab; key either indents the current line
 or advances to the next tab position. If the insertion point is at or before the
 first non-space character in the line, or if there is a selection, the current line
 is indented by the number of character positions specified in <guilabel>Indentation width</guilabel>.
 If the insertion point is located after the first non-space character in the line
 and there is no selection, white space is inserted so that the next tab position is
 reached: if the option <guilabel>Insert spaces instead of tabulators</guilabel>
 on the <guilabel>General</guilabel> tab in the <guilabel>Editing</guilabel>
 page is enabled, spaces are inserted; otherwise, a single tabulator is inserted.</para>
 </listitem>
 </varlistentry>
 </variablelist>
 
 </listitem>
 </varlistentry>
 
 </variablelist>
 </listitem>
 </varlistentry>
 
 </variablelist>
 </sect4>
 
 <sect4 id="katepart-pref-edit-autocompletion">
 <title>Auto Completion</title>
 <variablelist>
 <varlistentry>
 <term><guilabel>General</guilabel></term>
 <listitem>
 <variablelist>
 <varlistentry>
 <term><guilabel>Enable auto completion</guilabel></term>
 <listitem>
 <para>If enabled, a word completion box automatically pops up during typing
 showing a list of text entries to complete the current text under the
 cursor.</para>
 </listitem>
 </varlistentry>
 </variablelist>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><guilabel>Minimal word length to complete</guilabel></term>
 <listitem><para>While typing text, the word completion searches for words in the
 document starting with the already typed text. This option configures the minimal
 amount of characters that are needed to make the word completion active and pop
 up a completion box.</para></listitem>
 </varlistentry>
 
 </variablelist>
 
 </sect4>
 
 <sect4 id="katepart-pref-edit-vi-input-mode">
 <title>Vi Input Mode</title>
 <variablelist>
 <varlistentry>
 <term><guilabel>General</guilabel></term>
 <listitem>
 <variablelist>
 <varlistentry>
 <term><guilabel>Use VI input mode</guilabel></term>
 <listitem>
 <para>When selected, the vi input mode will be enabled when opening a new view.
 You can still toggle the vi input mode on/off for a particular view in the
 <guimenu>Edit</guimenu> menu.</para>
 </listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Let Vi commands override Kate shortcuts</guilabel></term>
 <listitem>
 <para>When selected, Vi commands will override &kappname;'s built-in commands. For
 example: <keycombo action="simul">&Ctrl;<keycap>R</keycap></keycombo> will redo,
 and override the standard action (showing the search and replace dialog).</para>
 </listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Hide the Vi mode status bar</guilabel></term>
 <listitem>
 <para>By default, an extra status bar will be used when the Vi input mode is
 enabled. This status bar shows commands while they are being typed and
 messages/errors produced by Vi commands.</para>
 <para>Checking this option will hide this extra status line.</para>
 </listitem>
 </varlistentry>
 </variablelist>
 </listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Key Mapping</guilabel></term>
 <listitem><para>
 Key mapping is used to change the meaning of typed keys. This allows you to
 move commands to other keys or make special keypresses for doing a series of
 commands.</para>
 <para>Example:</para>
 <para><keycap>F2</keycap> -> <keycap>I--</keycap> &Esc;</para>
 <para>This will prepend <keycap>I--</keycap> to a line when pressing <keycap>F2</keycap>.
 </para>
 </listitem>
 </varlistentry>
 </variablelist>
 
 </sect4>
 
 <sect4 id="katepart-pref-edit-spellcheck">
 <title>Spellcheck</title>
 <para>These configuration options are described in the documentation for the
 &systemsettings; module <ulink url="help:/kcontrol/spellchecking">Spell Checker</ulink>.</para>
 </sect4>
 
 </sect3>
 
 <sect3 id="katepart-pref-open-save">
 <title>Open/Save</title>
 
 <sect4 id="katepart-pref-open-save-general">
 <title>General</title>
 
 <variablelist>
 
 <varlistentry>
 <term><guilabel>File Format</guilabel></term>
 <listitem>
 <variablelist>
 
 <varlistentry>
 <term><guilabel>Encoding:</guilabel></term>
 <listitem>
 <para>This defines the standard encoding to use to open/save files, if not changed
 in the open/save dialog or by using a command line option.</para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><guilabel>Encoding Detection</guilabel></term>
 <listitem>
 <para>Select an item from the drop down box, either to disable autodetection or
 use <guilabel>Universal</guilabel> to enable autodetection for all encodings. But as
 this may probably only detect utf-8/utf-16, selecting a region will use custom heuristics
 for better results.
 If neither the encoding chosen as standard above, nor the encoding specified
 in the open/save dialog, nor the encoding specified on command line match
 the content of the file, this detection will be run.</para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><guilabel>Fallback Encoding</guilabel></term>
 <listitem>
 <para>This defines the fallback encoding to try for opening files if neither the
 encoding chosen as standard above, nor the encoding specified in the open/
 save dialog, nor the encoding specified on command line match the content of
 the file.  Before this is used, an attempt will be made to determine the
 encoding to use by looking for a byte order marker at start of file: if one
 is found, the right unicode encoding will be chosen; otherwise encoding
 detection will run, if both fail fallback encoding will be tried.</para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><guilabel>End of line:</guilabel></term>
 <listitem>
 <para>Choose your preferred end of line mode for your active
 document. You have the choice between &UNIX;, DOS/&Windows; or Macintosh.</para>
 </listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Automatic end of line detection</guilabel></term>
 <listitem>
 <para>Check this if you want the editor to autodetect the end of line
 type. The first found end of line type will be used for the whole file.</para>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><guilabel>Enable byte order marker</guilabel></term>
 <listitem>
 <para>The byte order mark is a special sequence at the beginning of unicode
 encoded documents. It helps editors to open text documents with the correct
 unicode encoding. For more information see <ulink
 url="https://en.wikipedia.org/wiki/Byte_Order_Mark">Byte Order Mark</ulink>.</para>
 </listitem>
 </varlistentry>
 <!--
 Line Length Limit missing
  -->
 </variablelist>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><guilabel>Automatic Cleanups on Load/Save</guilabel></term>
 <listitem>
 <variablelist>
 <varlistentry>
 <term><guilabel>Remove trailing spaces</guilabel></term>
 <listitem>
 <para>The editor will automatically eliminate extra spaces at the ends of lines
 of text while loading/saving the file.</para>
 </listitem>
 </varlistentry>
 </variablelist>
 </listitem>
 </varlistentry>
 
 </variablelist>
 </sect4>
 
 <sect4 id="katepart-pref-open-save-advanced">
 <title>Advanced</title>
 <variablelist>
 <varlistentry>
 <term><guilabel>Folder Config File</guilabel></term>
 <listitem>
 <variablelist>
 <varlistentry>
 <term><guilabel>Search depth for config file:</guilabel></term>
 <listitem>
 <para>The editor will search the given number of folder levels upwards
 for &kappname; config file and load the settings line from it.
 Further information about these hidden folder config files you find in the
 <ulink url="help:/katepart/config-variables.html">document variables section</ulink>.
 </para>
 </listitem>
 </varlistentry>
 </variablelist>
 </listitem>
 </varlistentry>
 
 <varlistentry>
 <term><guilabel>Backup on Save</guilabel></term>
 <listitem><para>Backing up on save will cause &kappname; to copy the disk file to
 &lt;prefix&gt;&lt;filename&gt;&lt;suffix&gt; before saving changes.
 The suffix defaults to <emphasis role="bold">~</emphasis> and prefix is empty by
 default. </para>
 <variablelist>
 <varlistentry>
 <term><guilabel>Local files</guilabel></term>
 <listitem>
 <para>Check this if you want backups of local files when
 saving.</para>
 </listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Remote files</guilabel></term>
 <listitem>
 <para>Check this if you want backups of remote files when saving.</para>
 </listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Prefix</guilabel></term>
 <listitem>
 <para>Enter the prefix to prepend to the backup file names.</para>
 </listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Suffix</guilabel></term>
 <listitem>
 <para>Enter the suffix to add to the backup file names.</para>
 </listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Disable swap file syncing</guilabel></term>
 <listitem>
 <para>&kappname; is able to recover (most of) what was written after last save in case
 of a crash or power failure. A swap file (.swp.&lt;filename&gt;) is created
 after the first editing action on a document. If the user doesn’t save the
 changes and &kappname; crashes, the swap file remains on the disk. When opening a
 file, &kappname; checks if there is a swap file for the document and if it is, it asks
 the user whether he wants to recover the lost data or not. The user has the
 possibility to view the differences between the original file and the recovered
 one, too. The swap file is deleted after every save and on normal exit.</para>
 <para>&kappname; syncs the swap files on the disk every 15 seconds, but only if they
 have changed since the last sync. The user can disable the swap files syncing if
 he wants, by checking the <guilabel>Disable swap file syncing</guilabel> box,
 but this can lead to more data loss.</para>
 </listitem>
 </varlistentry>
 
 </variablelist>
 </listitem>
 </varlistentry>
 
 </variablelist>
 </sect4>
 
 <sect4 id="katepart-pref-open-save-modes-filetypes">
 <title>Modes &amp; Filetypes</title>
 <para>This page allows you to override the default configuration for documents
 of specified &MIME; types. When the editor loads a document, it will try if it
 matches the file masks or &MIME; types for one of the defined filetypes, and if so
 apply the variables defined. If more filetypes match, the one with the highest
 priority will be used.
 </para>
 <variablelist>
 <varlistentry>
 <term><guilabel>Filetype:</guilabel></term>
 <listitem><para>The filetype with the highest priority is the one displayed in
 the first drop down box. If more filetypes were found, they are
 also listed.</para>
 <variablelist>
 <varlistentry>
 <term><guilabel>New</guilabel></term>
 <listitem><para>This is used to create a new filetype. After
 you click on this button, the fields below get empty and you
 can fill the properties you want for the new filetype.</para></listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Delete</guilabel></term>
 <listitem><para>To remove an existing filetype, select it from the drop down
 box and press the Delete button.</para></listitem>
 </varlistentry>
 </variablelist>
 </listitem> </varlistentry>
 
 <varlistentry>
 <term><guilabel>Properties of <replaceable>current filetype</replaceable></guilabel></term>
 <listitem><para>The filetype with the highest priority is the one displayed in
 the first drop down box. If more filetypes were found, they are also
 listed.</para>
 <variablelist>
 <varlistentry>
 <term><guilabel>Name:</guilabel></term>
 <listitem><para>The name of the filetype will be the text of the corresponding
 menu item. This name is displayed in the
 <menuchoice><guimenu>Tools</guimenu><guimenuitem>Filetypes</guimenuitem>
 </menuchoice ></para></listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Section:</guilabel></term>
 <listitem><para>The section name is used to organize the file types in
 menus. This is also used in the
 <menuchoice><guimenu>Tools</guimenu><guimenuitem>Filetypes</guimenuitem>
 </menuchoice> menu.</para></listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Variables:</guilabel></term>
 <listitem><para>This string allows you to configure &kappname;'s settings for the
 files selected by this &MIME; type using &kappname; variables. You can set almost any
 configuration option, such as highlight, indent-mode,
 &etc;</para>
 <para>Press <guibutton>Edit</guibutton> to see a list of all available variables
 and their descriptions.  Select the checkbox on the left to enable a particular
 variable and then set the value of the variable on the right.  Some variables
 provide a drop-down box to select possible values from while others require you
 to enter a valid value manually.</para>
 <para>For complete information on these variables, see
 <ulink url="help:/katepart/config-variables.html">Configuring with Document
 Variables</ulink>.</para>
 </listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Highlighting:</guilabel></term>
 <listitem><para>If you create a new file type, this drop down box allows you to
 select a filetype for highlighting.</para></listitem>
 </varlistentry>
 
 <varlistentry>
 <term><guilabel>Indentation Mode:</guilabel></term>
 <listitem><para>The drop down box specifies the indentation mode for new
 documents.</para></listitem>
 </varlistentry>
 
 <varlistentry>
 <term><guilabel>File extensions:</guilabel></term>
 <listitem><para>The wildcards mask allows you to select files by filename. A
 typical mask uses an asterisk and the file extension, for example
 <filename>*.txt; *.text</filename>. The string is a semicolon-separated list of
 masks.</para></listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>&MIME; types:</guilabel></term>
 <listitem><para>Displays a wizard that helps you easily select
 &MIME; types.</para></listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Priority:</guilabel></term>
 <listitem><para>Sets a priority for this file type. If more than one file type
 selects the same file, the one with the highest priority will be
 used.</para></listitem>
 </varlistentry>
 </variablelist>
 </listitem> </varlistentry>
 <varlistentry>
 <term><guibutton>Download Highlighting Files...</guibutton></term>
 <listitem>
 <para>
 Click this button to download new or updated syntax highlight descriptions
 from the &kappname; website.
 </para>
 </listitem>
 </varlistentry>
 
 </variablelist>
 </sect4>
 
 </sect3>
 
 <sect3 id="katepart-pref-plugins">
 <title>Extensions</title> <!-- updated to 4.7 + synced with kwrite -->
 <para>The <guilabel>Plugins</guilabel> tab lists all available plugins and you can check those you
 want to use. Click on the <guibutton>Information</guibutton> button to open the
 <guilabel>About</guilabel> dialog of this plugin.</para>
 <para>Once a configurable plugin is checked, the
 <guibutton>Configure</guibutton> button is enabled and you can click it
 in order to configure the highlighted plugin.</para>
 <variablelist>
 <title>Editor Component Plugins</title>
 <!-- not released with 4.7
 <varlistentry>
 <term><guilabel>Artistic Comment</guilabel></term>
 <listitem><para>Format long source-code comments like license-headers
 or descriptions using different style.</para></listitem>
 </varlistentry>
 -->
 <varlistentry>
 <term><guilabel>AutoBrace</guilabel></term>
 <listitem><para>The autobrace plugin supersedes the &kappname; internal
 <quote>Auto Brackets</quote> feature.
 It automatically inserts a closing brace <keycap>}</keycap> at the beginning
 of the next line after ending a line with an opening one <keycap>{</keycap>
 and pressing the &Enter; key.</para></listitem>
 </varlistentry>
 <!--http://jakob.petsovits.at/topic/kate-->
 <!--Right, it's the automatic insertion of a closing brace (<quote>}</quote>) after you ended a line with an opening one (<quote>{</quote>). Kate's standard insertion of parentheses, brackets and braces is simply too obtrusive for me, so even if I tried it several times I always had to disable it again because I can't stand it. So here's how AutoBrace works.
 You, the developer, are writing a line of code, and want to open a new block delimited by braces. Looks like this:
 If you press Enter and AutoBrace is enabled, it will insert your favorite new brace where it belongs. Looks like this:
 -->
 <varlistentry>
 <term><guilabel>Data Tools</guilabel></term>
 <listitem><para>Enables data tools like thesaurus and spell check (if installed).
 Data tools are only available when text is selected, or when the &RMB;
 is clicked over a word. If no data tools are offered even when text
 is selected, you need to install them.
 If this plugin is enabled and data tools are installed, additional items
 appear at the end of the context menu.</para></listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Exporter</guilabel></term>
 <listitem><para>This command allows you to export the current document with all highlighting
 information into a &HTML; document using <menuchoice><guimenu>File</guimenu><guimenuitem>Export
 as &HTML;</guimenuitem></menuchoice>. Additionally you can use <menuchoice><guimenu>Edit</guimenu>
 <guimenuitem>Copy as &HTML;</guimenuitem></menuchoice> to copy the currently selected text
 as &HTML; to the system clipboard.</para></listitem>
 </varlistentry>
 <!-- not in 4.7
 <varlistentry>
 <term><guilabel>Highlight Selection</guilabel></term>
 <listitem><para>Highlights all words that match the currently selected text.</para></listitem>
 </varlistentry>
 -->
 <varlistentry>
 <term><guilabel>IconInserter</guilabel></term>
 <listitem><para>The icon inserter plugin is only of use for &kde; developers: It adds an item
 <guimenuitem>Insert KIcon-Code</guimenuitem> into the context menu of the editor.
 If activated, the &plasma;'s icon chooser opens (showing application icons, action icons &etc;..).
 If you click on it, the file name without file extension will be inserted as
 text. Useful only for setting icons via &kde-frameworks; through the KIcon() class.
 </para></listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Insane (not ZEN) &HTML; coding (light edition)</guilabel></term>
 <listitem><para>A plugin, which does zen-coding like selector completion.
 For more information see <ulink url="https://en.wikipedia.org/wiki/Zen_Coding">
 Zen Coding</ulink>.</para></listitem>
 </varlistentry>
 <varlistentry>
 <term><guilabel>Insert File</guilabel></term>
 <listitem><para>This plugin allows you to insert any readable file at the cursor position.
 If enabled, the <guimenu>Tools</guimenu> menu has an additional menu item
 <guimenuitem>Insert File</guimenuitem>.</para></listitem>
 </varlistentry>
 </variablelist>
 </sect3>
 </sect2>
 <!--/end kwrite-->
 
 </sect1>