File indexing completed on 2024-04-14 05:36:42

 //
 // C++ Implementation: flowicndocument
 //
 // Description:
 //
 //
 // Author: Zoltan P <zoltan.padrah@gmail.com>, (C) 2008
 //
 // Copyright: See COPYING file that comes with this distribution
 //
 //
 #include "flowicndocument.h"
 
 #include "cnitemgroup.h"
 #include "connector.h"
 #include "conrouter.h"
 #include "flowcontainer.h"
 #include "fpnode.h"
 #include "item.h"
 #include "junctionflownode.h"
 #include "nodegroup.h"
 
 #include <ktechlab_debug.h>
 
 FlowICNDocument::FlowICNDocument(const QString &caption)
     : ICNDocument(caption)
 {
 }
 
 FlowICNDocument::~FlowICNDocument()
 {
     // Go to hell, KtlQCanvas. I'm in charge of what gets deleted.
     KtlQCanvasItemList all = m_canvas->allItems();
     const KtlQCanvasItemList::Iterator end = all.end();
     for (KtlQCanvasItemList::Iterator it = all.begin(); it != end; ++it)
         (*it)->setCanvas(nullptr);
 
     // Remove all items from the canvas
     selectAll();
     deleteSelection();
 
     // Delete anything that got through the above couple of lines
     ConnectorList connectorsToDelete = m_connectorList;
     connectorsToDelete.clear();
     qDeleteAll(connectorsToDelete);
 
     deleteAllNodes();
 }
 
 void FlowICNDocument::deleteAllNodes()
 {
     FPNodeMap nodesToDelete = m_flowNodeList;
     m_flowNodeList.clear();
     qDeleteAll(nodesToDelete);
 }
 
 bool FlowICNDocument::canConnect(KtlQCanvasItem *qcanvasItem1, KtlQCanvasItem *qcanvasItem2) const
 {
     // Rough outline of what can and can't connect:
     // * At most three connectors to a node
     // * Can't have connectors going between different levels (e.g. can't have
     //   a connector coming outside a FlowContainer from inside).
     // * Can't have more than one route between any two nodes
     // * In all connections between nodes, must have at least one input and one
     //   output node at the ends.
 
     FPNode *startNode = dynamic_cast<FPNode *>(qcanvasItem1);
     FPNode *endNode = dynamic_cast<FPNode *>(qcanvasItem2);
 
     if ((startNode && startNode->numCon(true, false) > 2) || (endNode && endNode->numCon(true, false) > 2))
         return false;
 
     Connector *startConnector = dynamic_cast<Connector *>(qcanvasItem1);
     Connector *endConnector = dynamic_cast<Connector *>(qcanvasItem2);
 
     // Can't have I-junction in flowcode document
     if (startConnector && endConnector)
         return false;
 
     // BEGIN Change connectors to nodes
     FPNode *startNode1 = nullptr;
     FPNode *startNode2 = nullptr;
     if (startConnector) {
         startNode1 = dynamic_cast<FPNode *>(startConnector->startNode());
         startNode2 = dynamic_cast<FPNode *>(startConnector->endNode());
 
         if (!startNode1 || !startNode2)
             return false;
     } else if (!startNode)
         return false;
 
     FPNode *endNode1 = nullptr;
     FPNode *endNode2 = nullptr;
     if (endConnector) {
         endNode1 = dynamic_cast<FPNode *>(endConnector->startNode());
         endNode2 = dynamic_cast<FPNode *>(endConnector->endNode());
 
         if (!endNode1 || !endNode2)
             return false;
     } else if (!endNode)
         return false;
 
     // END Change connectors to nodes
 
     // BEGIN Check we have appropriate input and output allowance
     if (type() == Document::dt_flowcode) // this is obviouse
     {
         if (startNode1 && startNode2 && endNode1 && endNode2) {
             // Can't have I-configuration
             return false;
         }
 
         if (startNode && endNode) {
             // Nice and easy straight line to check
 
             if (!startNode->acceptInput() && !endNode->acceptInput())
                 return false;
 
             if (!startNode->acceptOutput() && !endNode->acceptOutput())
                 return false;
         }
 
         else {
             // We're in a T-configuration, we can only make this if the base of
             // the T is an output
             FPNode *base = startNode ? startNode : endNode;
             if (!base->acceptOutput())
                 return false;
         }
     } else
         qCCritical(KTL_LOG) << "BUG: document type is not dt_flowcode";
     // END Check we have appropriate input and output allowance
 
     return ICNDocument::canConnect(qcanvasItem1, qcanvasItem2);
 }
 
 Connector *FlowICNDocument::createConnector(Connector *con1, Connector *con2, const QPoint & /*pos1*/, const QPoint & /*pos2*/, QPointList * /*pointList*/)
 {
     // FIXME isn't all this dead code?
     /*
     if ( !canConnect( con1, con2 ) )
         return nullptr;
 
 
     const bool con1UsedManual = con1->usesManualPoints();
     const bool con2UsedManual = con2->usesManualPoints();
 
     QList<QPointList> oldCon1Points = con1->splitConnectorPoints(pos1);
     QList<QPointList> oldCon2Points = con2->splitConnectorPoints(pos2);
 
 
     // FIXME dynamic_cast used because Connector doesn't know about FPNode
 
     FPNode *node1a = dynamic_cast<FPNode*> ( con1->startNode() );
     FPNode *node1b = dynamic_cast<FPNode*> ( con1->endNode() );
 
     FPNode *node2a = dynamic_cast<FPNode*> ( con2->startNode() );
     FPNode *node2b = dynamic_cast<FPNode*> ( con2->endNode() );
 
     if ( !node1a || !node1b || !node2a || !node2b )
         return nullptr;
     */
     con1->hide();
     con2->hide();
 
     // if ( type() != Document::dt_circuit )
     return nullptr;
 }
 
 Connector *FlowICNDocument::createConnector(Node *node, Connector *con, const QPoint &pos2, QPointList *pointList)
 {
     if (!canConnect(node, con))
         return nullptr;
 
     // FIXME dynamic_cast used, fix it in Connector class
 
     FPNode *conStartNode = dynamic_cast<FPNode *>(con->startNode());
     FPNode *conEndNode = dynamic_cast<FPNode *>(con->endNode());
 
     FPNode *fpNode = dynamic_cast<FPNode *>(node);
 
     const bool usedManual = con->usesManualPoints();
 
     FPNode *newNode = new JunctionFlowNode(this, 0, pos2);
 
     QPointList autoPoints;
     if (!pointList) {
         addAllItemConnectorPoints();
         ConRouter cr(this);
         cr.mapRoute(int(node->x()), int(node->y()), pos2.x(), pos2.y());
         autoPoints = cr.pointList(false);
         pointList = &autoPoints;
     }
 
     QList<QPointList> oldConPoints = con->splitConnectorPoints(pos2);
     con->hide();
 
     // The actual new connector
     Connector *new1 = newNode->createInputConnector(node);
     fpNode->addOutputConnector(new1);
     new1->setRoutePoints(*pointList, usedManual);
 
     // The two connectors formed from the original one when split
     Connector *new2 = newNode->createInputConnector(conStartNode);
     conStartNode->addOutputConnector(new2);
     new2->setRoutePoints(oldConPoints.at(0), usedManual);
 
     Connector *new3 = conEndNode->createInputConnector(newNode);
     newNode->addOutputConnector(new3);
     new3->setRoutePoints(oldConPoints.at(1), usedManual);
 
     // Avoid flicker: tell them to update their draw lists now
     con->updateConnectorPoints(false);
     new1->updateDrawList();
     new2->updateDrawList();
     new3->updateDrawList();
 
     // Now it's safe to remove the connector...
     con->removeConnectorNoArg();
     flushDeleteList();
 
     deleteNodeGroup(conStartNode);
     deleteNodeGroup(conEndNode);
     createNodeGroup(newNode)->init();
 
     return new1;
 }
 
 Connector *FlowICNDocument::createConnector(const QString &startNodeId, const QString &endNodeId, QPointList *pointList)
 {
     FPNode *startNode = getFPnodeWithID(startNodeId);
     FPNode *endNode = getFPnodeWithID(endNodeId);
 
     if (!startNode || !endNode) {
         qCDebug(KTL_LOG) << "Either/both the connector start node and end node could not be found";
         return nullptr;
     }
 
     if (!canConnect(startNode, endNode))
         return nullptr;
 
     Connector *connector = endNode->createInputConnector(startNode);
     if (!connector) {
         qCCritical(KTL_LOG) << "End node did not create the connector";
         return nullptr;
     }
     startNode->addOutputConnector(connector);
     flushDeleteList(); // Delete any connectors that might have been removed by the nodes
 
     // Set the route to the manual created one if the user created such a route
     if (pointList)
         connector->setRoutePoints(*pointList, true);
 
     // FIXME WTF is going on here? Redundant/meaningless code?
     ConnectorList connectorList;
     connectorList.append(connector);
 
     setModified(true);
 
     requestRerouteInvalidatedConnectors();
     return connector;
 }
 
 Node *FlowICNDocument::nodeWithID(const QString &id)
 {
     if (m_flowNodeList.contains(id))
         return m_flowNodeList[id];
     else
         return nullptr;
 }
 
 FPNode *FlowICNDocument::getFPnodeWithID(const QString &id)
 {
     if (m_flowNodeList.contains(id))
         return m_flowNodeList[id];
     else
         return nullptr;
 }
 
 void FlowICNDocument::slotAssignNodeGroups()
 {
     ICNDocument::slotAssignNodeGroups();
 
     const FPNodeMap::iterator end = m_flowNodeList.end();
     for (FPNodeMap::iterator it = m_flowNodeList.begin(); it != end; ++it) {
         NodeGroup *ng = createNodeGroup(*it);
         if (ng)
             ng->init();
     }
 
     // We've destroyed the old node groups, so any collapsed flowcontainers
     // containing new node groups need to update them to make them invisible.
     const ItemMap::const_iterator itemListEnd = m_itemList.end();
     for (ItemMap::const_iterator it = m_itemList.begin(); it != itemListEnd; ++it) {
         if (FlowContainer *fc = dynamic_cast<FlowContainer *>(*it))
             fc->updateContainedVisibility();
     }
 }
 
 void FlowICNDocument::flushDeleteList()
 {
     // Remove duplicate items in the delete list
     KtlQCanvasItemList::iterator end = m_itemDeleteList.end();
     for (KtlQCanvasItemList::iterator it = m_itemDeleteList.begin(); it != end; ++it) {
         if (*it && (m_itemDeleteList.count(*it) > 1)) {
             *it = nullptr;
         }
     }
     m_itemDeleteList.removeAll(nullptr);
 
     end = m_itemDeleteList.end();
     for (KtlQCanvasItemList::iterator it = m_itemDeleteList.begin(); it != end; ++it) {
         KtlQCanvasItem *qcanvasItem = *it;
         m_selectList->removeQCanvasItem(*it);
 
         if (Item *item = dynamic_cast<Item *>(qcanvasItem))
             m_itemList.remove(item->id());
 
         else if (FPNode *node = dynamic_cast<FPNode *>(qcanvasItem))
             m_flowNodeList.remove(node->id());
 
         else if (Connector *con = dynamic_cast<Connector *>(qcanvasItem))
             m_connectorList.removeAll(con);
 
         else
             qCCritical(KTL_LOG) << "Unknown qcanvasItem! " << qcanvasItem;
 
         qcanvasItem->setCanvas(nullptr);
 
         delete qcanvasItem;
         *it = nullptr;
     }
 
     // Check connectors for merging
     bool doneJoin = false;
     const FPNodeMap::iterator nlEnd = m_flowNodeList.end();
     for (FPNodeMap::iterator it = m_flowNodeList.begin(); it != nlEnd; ++it) {
         (*it)->removeNullConnectors();
         int conCount = (*it)->getAllConnectors().count();
         if (conCount == 2 && !(*it)->parentItem()) {
             if (joinConnectors(*it))
                 doneJoin = true;
         }
     }
 
     if (doneJoin)
         flushDeleteList();
 
     requestRerouteInvalidatedConnectors();
 }
 
 bool FlowICNDocument::registerItem(KtlQCanvasItem *qcanvasItem)
 {
     if (!qcanvasItem)
         return false;
 
     if (!ItemDocument::registerItem(qcanvasItem)) {
         if (FPNode *node = dynamic_cast<FPNode *>(qcanvasItem)) {
             m_flowNodeList[node->id()] = node;
             emit nodeAdded(static_cast<Node *>(node));
         } else if (Connector *connector = dynamic_cast<Connector *>(qcanvasItem)) {
             m_connectorList.append(connector);
             emit connectorAdded(connector);
         } else {
             qCCritical(KTL_LOG) << "Unrecognised item";
             return false;
         }
     }
 
     requestRerouteInvalidatedConnectors();
 
     return true;
 }
 
 void FlowICNDocument::unregisterUID(const QString &uid)
 {
     m_flowNodeList.remove(uid);
     ICNDocument::unregisterUID(uid);
 }
 
 NodeList FlowICNDocument::nodeList() const
 {
     NodeList l;
 
     FPNodeMap::const_iterator end = m_flowNodeList.end();
     for (FPNodeMap::const_iterator it = m_flowNodeList.begin(); it != end; ++it)
         l << it.value();
 
     return l;
 }
 
 void FlowICNDocument::selectAllNodes()
 {
     const FPNodeMap::iterator nodeEnd = m_flowNodeList.end();
     for (FPNodeMap::iterator nodeIt = m_flowNodeList.begin(); nodeIt != nodeEnd; ++nodeIt) {
         if (*nodeIt)
             select(*nodeIt);
     }
 }
 
 bool FlowICNDocument::joinConnectors(FPNode *node)
 {
     // We don't want to destroy the node if it has a parent
     if (node->parentItem())
         return false;
 
     node->removeNullConnectors();
 
     int conCount = node->getAllConnectors().count();
     if (conCount != 2)
         return false;
 
     Connector *con1, *con2;
     Node *startNode, *endNode;
     QPointList conPoints;
 
     if (node->inputConnectorList().count() == 0) {
         // Both connectors emerge from node - output - i.e. node is pure start node
         con1 = node->outputConnectorList().at(0).data();
         con2 = node->outputConnectorList().at(1).data();
         if (con1 == con2) {
             return false;
         }
 
         startNode = con1->endNode();
         endNode = con2->endNode();
         conPoints = con1->connectorPoints(true) + con2->connectorPoints(false);
     } else if (node->inputConnectorList().count() == 1) {
         // Ont input, one output
         con1 = node->inputConnectorList().at(0).data();
         con2 = node->outputConnectorList().at(0).data();
         if (con1 == con2) {
             return false;
         }
 
         startNode = con1->startNode();
         endNode = con2->endNode();
         conPoints = con1->connectorPoints(false) + con2->connectorPoints(false);
     } else {
         // Both input - i.e. node is pure end node
         con1 = node->inputConnectorList().at(0).data();
         con2 = node->inputConnectorList().at(1).data();
         if (con1 == con2) {
             return false;
         }
 
         startNode = con1->startNode();
         endNode = con2->startNode();
         conPoints = con1->connectorPoints(false) + con2->connectorPoints(true);
     }
 
     if (!startNode || !endNode)
         return false;
 
     // HACK // FIXME // dynamic_cast used
     FPNode *startFpNode, *endFpNode;
     startFpNode = dynamic_cast<FPNode *>(startNode);
     endFpNode = dynamic_cast<FPNode *>(endNode);
 
     Connector *newCon = endFpNode->createInputConnector(startFpNode);
     if (!newCon)
         return false;
 
     startFpNode->addOutputConnector(newCon);
     newCon->setRoutePoints(conPoints, con1->usesManualPoints() || con2->usesManualPoints());
 
     // Avoid flicker: update draw lists now
     con1->updateConnectorPoints(false);
     con2->updateConnectorPoints(false);
     newCon->updateDrawList();
 
     node->removeNode();
     con1->removeConnectorNoArg();
     con2->removeConnectorNoArg();
 
     return true;
 }
 
 #include "moc_flowicndocument.cpp"