poqm/sv/analitza_qt.po

0001 # Copyright (C) YEAR This_file_is_part_of_KDE
0002 # This file is distributed under the same license as the PACKAGE package.
0003 #
0004 # Stefan Asserhall <stefan.asserhall@bredband.net>, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2019.
0005 msgid ""
0006 msgstr ""
0007 "Project-Id-Version: \n"
0008 "Report-Msgid-Bugs-To: http://bugs.kde.org\n"
0009 "POT-Creation-Date: 2014-02-16 03:26+0000\n"
0010 "PO-Revision-Date: 2019-02-05 20:50+0100\n"
0011 "Last-Translator: Stefan Asserhäll <stefan.asserhall@bredband.net>\n"
0012 "Language-Team: Swedish <kde-i18n-doc@kde.org>\n"
0013 "Language: sv\n"
0014 "MIME-Version: 1.0\n"
0015 "Content-Type: text/plain; charset=UTF-8\n"
0016 "Content-Transfer-Encoding: 8bit\n"
0017 "Plural-Forms: nplurals=2; plural=n != 1;\n"
0018 "X-Generator: Lokalize 2.0\n"
0019 "X-Qt-Contexts: true\n"
0020
0021 msgctxt "QObject|dictionary"
0022 msgid "xaxaxaxaxa"
0023 msgstr "xaxaxaxaxa"
0024
0025 msgctxt "QObject|dictionary"
0026 msgid "cosa"
0027 msgstr "cosa"
0028
0029 #: analitza/analyzer.cpp:193
0030 msgctxt "QCoreApplication|"
0031 msgid "Cannot calculate an empty expression"
0032 msgstr "Kan inte beräkna ett tomt uttryck"
0033
0034 #: analitza/analyzer.cpp:240 analitza/analyzer.cpp:259
0035 #: analitza/analyzer.cpp:285
0036 msgctxt "QCoreApplication|"
0037 msgid "Must specify a correct operation"
0038 msgstr "Måste ange en korrekt operation"
0039
0040 #: analitza/analyzer.cpp:255 analitza/analyzer.cpp:288
0041 #, qt-format
0042 msgctxt "QCoreApplication|"
0043 msgid "Unknown identifier: '%1'"
0044 msgstr "Okänd identifierare: '%1'"
0045
0046 #: analitza/analyzer.cpp:257 analitza/analyzer.cpp:290
0047 msgctxt "identifier separator in error message|"
0048 msgid "', '"
0049 msgstr "', '"
0050
0051 #: analitza/analyzer.cpp:615
0052 msgctxt "Error message, no proper condition found.|"
0053 msgid "Could not find a proper choice for a condition statement."
0054 msgstr "Kunde inte hitta ett riktigt val för en villkorssats."
0055
0056 #: analitza/analyzer.cpp:936
0057 msgctxt "QCoreApplication|"
0058 msgid "Type not supported for bounding."
0059 msgstr "Typ stöds inte för avgränsning."
0060
0061 #: analitza/analyzer.cpp:961
0062 msgctxt "QCoreApplication|"
0063 msgid "The downlimit is greater than the uplimit"
0064 msgstr "Den undre gränsen är större än den övre"
0065
0066 #: analitza/analyzer.cpp:963
0067 msgctxt "QCoreApplication|"
0068 msgid "Incorrect uplimit or downlimit."
0069 msgstr "Felaktig övre eller undre gräns."
0070
0071 #: analitza/analyzer.cpp:1055 analitza/analyzer.cpp:1080
0072 #, qt-format
0073 msgctxt "QCoreApplication|"
0074 msgid "Invalid type for parameter '%1'"
0075 msgstr "Ogiltig typ för parametern '%1'"
0076
0077 #: analitza/analyzer.cpp:1877
0078 msgctxt "By a cycle i mean a variable that depends on itself|"
0079 msgid "Defined a variable cycle"
0080 msgstr "Definierade en variabelcykel"
0081
0082 #: analitza/analyzer.cpp:1919
0083 msgctxt "QCoreApplication|"
0084 msgid "The result is not a number"
0085 msgstr "Resultatet är inte ett tal"
0086
0087 #: analitza/commands/blockmatrixcommands.cpp:44
0088 #: analitza/commands/blockmatrixcommands.cpp:234
0089 #: analitza/commands/listcommands.cpp:47 analitza/commands/listcommands.cpp:64
0090 #: analitza/commands/matrixcommands.cpp:48
0091 #: analitza/commands/matrixcommands.cpp:201
0092 #: analitza/commands/vectorcommands.cpp:45
0093 #: analitza/commands/vectorcommands.cpp:82
0094 #, qt-format
0095 msgctxt "QCoreApplication|"
0096 msgid "Invalid parameter count for '%1'"
0097 msgstr "Felaktigt antal parametrar för '%1'"
0098
0099 #: analitza/commands/blockmatrixcommands.cpp:86
0100 #: analitza/commands/blockmatrixcommands.cpp:119
0101 #: analitza/commands/blockmatrixcommands.cpp:122
0102 msgctxt "QCoreApplication|"
0103 msgid "Blocks must have consistent size between each and other"
0104 msgstr "Block måste ha överensstämmande storlek mellan varandra"
0105
0106 #: analitza/commands/blockmatrixcommands.cpp:90
0107 #: analitza/commands/blockmatrixcommands.cpp:126
0108 #: analitza/commands/blockmatrixcommands.cpp:263
0109 msgctxt "QCoreApplication|"
0110 msgid "Do not want empty blocks"
0111 msgstr "Det går inte att ha tomma block"
0112
0113 #: analitza/commands/blockmatrixcommands.cpp:93
0114 #: analitza/commands/blockmatrixcommands.cpp:130
0115 #: analitza/commands/blockmatrixcommands.cpp:209
0116 #: analitza/commands/blockmatrixcommands.cpp:267
0117 msgctxt "QCoreApplication|"
0118 msgid "Blocks must be matrices"
0119 msgstr "Block måste vara matriser"
0120
0121 #: analitza/commands/blockmatrixcommands.cpp:142
0122 msgctxt "QCoreApplication|"
0123 msgid "Number of blocks must be consistent"
0124 msgstr "Antal block måste överensstämma"
0125
0126 #: analitza/commands/blockmatrixcommands.cpp:145
0127 #: analitza/commands/blockmatrixcommands.cpp:211
0128 #: analitza/commands/matrixcommands.cpp:147
0129 msgctxt "QCoreApplication|"
0130 msgid "Do not want empty vectors/matrixrow elements"
0131 msgstr "Det går inte att ha tomma vektorelement eller radelement i matriser"
0132
0133 #: analitza/commands/blockmatrixcommands.cpp:150
0134 #: analitza/commands/blockmatrixcommands.cpp:213
0135 #: analitza/commands/matrixcommands.cpp:149
0136 msgctxt "QCoreApplication|"
0137 msgid "Matrix constructor needs vectors or matrixrow elements"
0138 msgstr ""
0139 "Matrisens konstruktor får bara innehålla vektorelement eller element som är "
0140 "matrisrader"
0141
0142 #: analitza/commands/blockmatrixcommands.cpp:244
0143 #: analitza/commands/matrixcommands.cpp:288
0144 #, qt-format
0145 msgctxt "QCoreApplication|"
0146 msgid "the arg %1 is invalid or is error"
0147 msgstr "argumentet %1 är ogiltigt eller felaktigt"
0148
0149 #: analitza/commands/eigencommands.cpp:39
0150 #, qt-format
0151 msgctxt "QCoreApplication|"
0152 msgid "Invalid parameter count for '%1'. Should have 1 parameter"
0153 msgstr "Felaktigt antal parametrar för '%1'. Ska ha 1 parameter."
0154
0155 #: analitza/commands/eigencommands.cpp:47
0156 #, qt-format
0157 msgctxt "QCoreApplication|"
0158 msgid "To use '%1' command the input matrix must be square"
0159 msgstr "För att använda kommandot '%1' måste indatamatrisen vara kvadratisk"
0160
0161 #: analitza/commands/eigencommands.cpp:68
0162 #: analitza/commands/eigencommands.cpp:74
0163 #, qt-format
0164 msgctxt "QCoreApplication|"
0165 msgid ""
0166 "Invalid parameter type in matrix entry (%1,%2) for '%3', it must be a number "
0167 "value"
0168 msgstr ""
0169 "Ogiltig parametertyp i matrisinmatning (%1,%2) för '%3'. Det måste vara ett "
0170 "numeriskt värde."
0171
0172 #: analitza/commands/eigencommands.cpp:126
0173 #: analitza/commands/eigencommands.cpp:193
0174 msgctxt "QCoreApplication|NaN means Not a Number, is an invalid float number"
0175 msgid "Returned eigenvalue is NaN"
0176 msgstr "Returnerat egenvärde är NaN"
0177
0178 #: analitza/commands/eigencommands.cpp:132
0179 #: analitza/commands/eigencommands.cpp:196
0180 msgctxt "QCoreApplication|"
0181 msgid "Returned eigenvalue is too big"
0182 msgstr "Returnerat egenvärde är för stort"
0183
0184 #: analitza/commands/matrixcommands.cpp:31
0185 msgctxt "QCoreApplication|"
0186 msgid "Matrix dimensions must be greater than zero"
0187 msgstr "Matrisens dimensioner måste vara större än noll"
0188
0189 #: analitza/commands/matrixcommands.cpp:122 analitza/expression.cpp:296
0190 msgctxt "QCoreApplication|"
0191 msgid "All matrixrow elements must have the same size"
0192 msgstr "Alla radelement i matriser måste ha samma storlek"
0193
0194 #: analitza/commands/matrixcommands.cpp:127
0195 msgctxt "QCoreApplication|"
0196 msgid "Not all are rows or vectors"
0197 msgstr "Alla rader är inte vektorer"
0198
0199 #: analitza/commands/matrixcommands.cpp:143
0200 msgctxt "QCoreApplication|"
0201 msgid "Every argument must be a matrixrow element"
0202 msgstr "Varje element måste vara en matrisrad"
0203
0204 #: analitza/commands/matrixcommands.cpp:241
0205 msgctxt "QCoreApplication|"
0206 msgid "The nth diagonal index must be less than the row count"
0207 msgstr "Det n:te diagonalindexet måste vara mindre än antal rader"
0208
0209 #: analitza/commands/matrixcommands.cpp:249
0210 msgctxt "QCoreApplication|"
0211 msgid "The nth diagonal index must be less than the column count"
0212 msgstr "Det n:te diagonalindexet måste vara mindre än antal kolumner"
0213
0214 #: analitza/commands/matrixcommands.cpp:265
0215 msgctxt "QCoreApplication|"
0216 msgid "nth diagonal index must be integer number"
0217 msgstr "n:te diagonalindex måste vara ett heltal"
0218
0219 #: analitza/commands/matrixcommands.cpp:269
0220 msgctxt "QCoreApplication|"
0221 msgid "nth diagonal index must be a positive integer number"
0222 msgstr "n:te diagonalindex måste vara ett positivt heltal"
0223
0224 #: analitza/commands/vectorcommands.cpp:62
0225 #, qt-format
0226 msgctxt "QCoreApplication|"
0227 msgid "Invalid parameter type for '%1', was expected a list"
0228 msgstr "Felaktig parametertyp för '%1', förväntade en lista."
0229
0230 #: analitza/commands/vectorcommands.cpp:75
0231 #: analitza/commands/vectorcommands.cpp:78
0232 msgctxt "QCoreApplication|"
0233 msgid "Vector size must be some integer value greater to zero"
0234 msgstr "Vektorstorleken måste vara ett heltal större än noll"
0235
0236 #: analitza/explexer.cpp:78
0237 msgctxt "QCoreApplication|"
0238 msgid "Unexpectedly arrived to the end of the input"
0239 msgstr "Kom oväntat till slutet på indata"
0240
0241 #: analitza/explexer.cpp:112
0242 #, qt-format
0243 msgctxt "QCoreApplication|"
0244 msgid "Unknown token %1"
0245 msgstr "Okänd symbol %1"
0246
0247 #: analitza/expression.cpp:162
0248 #, qt-format
0249 msgctxt "QCoreApplication|"
0250 msgid "<em>%1</em> needs at least 2 parameters"
0251 msgstr "<em>%1</em> kräver minst två parametrar"
0252
0253 #: analitza/expression.cpp:164
0254 #, qt-format
0255 msgctxt "QCoreApplication|"
0256 msgid "<em>%1</em> requires %2 parameters"
0257 msgstr "<em>%1</em> kräver %2 parametrar"
0258
0259 #: analitza/expression.cpp:171
0260 #, qt-format
0261 msgctxt "QCoreApplication|"
0262 msgid "Missing boundary for '%1'"
0263 msgstr "Saknar gräns för '%1'"
0264
0265 #: analitza/expression.cpp:173
0266 #, qt-format
0267 msgctxt "QCoreApplication|"
0268 msgid "Unexpected bounding for '%1'"
0269 msgstr "Oväntad avgränsning för '%1'"
0270
0271 #: analitza/expression.cpp:178
0272 #, qt-format
0273 msgctxt "QCoreApplication|"
0274 msgid "<em>%1</em> missing bounds on '%2'"
0275 msgstr "<em>%1</em> saknar gränser för '%2'"
0276
0277 #: analitza/expression.cpp:200
0278 msgctxt "QCoreApplication|"
0279 msgid "Wrong declare"
0280 msgstr "Felaktig deklaration"
0281
0282 #: analitza/expression.cpp:210
0283 #, qt-format
0284 msgctxt "QCoreApplication|"
0285 msgid "Empty container: %1"
0286 msgstr "Tom behållare: %1"
0287
0288 #: analitza/expression.cpp:228
0289 msgctxt "there was a conditional outside a condition structure|"
0290 msgid "We can only have conditionals inside piecewise structures."
0291 msgstr "Villkor får bara finnas inne i strukturer med piecewise."
0292
0293 #: analitza/expression.cpp:244
0294 #, qt-format
0295 msgctxt "QCoreApplication|"
0296 msgid "Cannot have two parameters with the same name like '%1'."
0297 msgstr "Kan inte ha två parametrar med samma namn såsom '%1'."
0298
0299 #: analitza/expression.cpp:259
0300 msgctxt ""
0301 "this is an error message. otherwise is the else in a mathml condition|"
0302 msgid "The <em>otherwise</em> parameter should be the last one"
0303 msgstr "Parametern <em>otherwise</em> ska vara den sista"
0304
0305 #: analitza/expression.cpp:267
0306 #, qt-format
0307 msgctxt "there was an element that was not a conditional inside a condition|"
0308 msgid "%1 is not a proper condition inside the piecewise"
0309 msgstr "%1 är inte ett riktigt villkor inne i piecewise"
0310
0311 #: analitza/expression.cpp:273
0312 msgctxt "QCoreApplication|"
0313 msgid "We can only declare variables"
0314 msgstr "Det går bara att deklarera variabler"
0315
0316 #: analitza/expression.cpp:279
0317 msgctxt "QCoreApplication|"
0318 msgid "We can only have bounded variables"
0319 msgstr "Det går bara att ha avgränsade variabler"
0320
0321 #: analitza/expression.cpp:290 analitza/expression.cpp:495
0322 msgctxt "QCoreApplication|"
0323 msgid "Do not want empty matrixrow elements"
0324 msgstr "Det går inte att ha tomma radelement i matriser"
0325
0326 #: analitza/expression.cpp:300
0327 msgctxt "QCoreApplication|"
0328 msgid "The matrix must contain only matrixrow elements"
0329 msgstr "Matrisen får bara innehålla element som är matrisrader"
0330
0331 #: analitza/expression.cpp:419
0332 #, qt-format
0333 msgctxt "QCoreApplication|"
0334 msgid "Error while parsing: %1"
0335 msgstr "Fel vid tolkning: %1"
0336
0337 #: analitza/expression.cpp:450
0338 #, qt-format
0339 msgctxt "An error message|"
0340 msgid "Container unknown: %1"
0341 msgstr "Okänd behållare: %1"
0342
0343 #: analitza/expression.cpp:456
0344 #, qt-format
0345 msgctxt "QCoreApplication|"
0346 msgid "Cannot codify the %1 value."
0347 msgstr "Kan inte tolka värdet %1."
0348
0349 #: analitza/expression.cpp:462
0350 #, qt-format
0351 msgctxt "QCoreApplication|"
0352 msgid "The %1 operator cannot have child contexts."
0353 msgstr "Operatorn %1 kan inte ha underliggande objektsammanhang."
0354
0355 #: analitza/expression.cpp:466
0356 #, qt-format
0357 msgctxt "QCoreApplication|"
0358 msgid "The element '%1' is not an operator."
0359 msgstr "Elementet '%1' är inte en operator."
0360
0361 #: analitza/expression.cpp:479
0362 msgctxt "QCoreApplication|"
0363 msgid "Do not want empty vectors"
0364 msgstr "Det går inte att ha tomma vektorer"
0365
0366 #: analitza/expression.cpp:489
0367 msgctxt "QCoreApplication|"
0368 msgid "Do not want empty matrices"
0369 msgstr "Det går inte att ha tomma matriser"
0370
0371 #: analitza/expression.cpp:508
0372 #, qt-format
0373 msgctxt "Error message due to an unrecognized input|"
0374 msgid "Not supported/unknown: %1"
0375 msgstr "Stöds inte eller okänd: %1"
0376
0377 #: analitza/expressionparser.cpp:296
0378 msgctxt "QCoreApplication|"
0379 msgid ", "
0380 msgstr ", "
0381
0382 #: analitza/expressionparser.cpp:296
0383 #, qt-format
0384 msgctxt "error message|"
0385 msgid "Expected %1 instead of '%2'"
0386 msgstr "Förväntade %1 istället för '%2'"
0387
0388 #: analitza/expressionparser.cpp:298
0389 msgctxt "QCoreApplication|"
0390 msgid "Missing right parenthesis"
0391 msgstr "Saknar högerparentes"
0392
0393 #: analitza/expressionparser.cpp:300
0394 msgctxt "QCoreApplication|"
0395 msgid "Unbalanced right parenthesis"
0396 msgstr "Obalanserad högerparentes"
0397
0398 #: analitza/expressionparser.cpp:303
0399 #, qt-format
0400 msgctxt "QCoreApplication|"
0401 msgid "Unexpected token identifier: %1"
0402 msgstr "Oväntad symbolidentifierare: %1"
0403
0404 #: analitza/expressionparser.cpp:305
0405 #, qt-format
0406 msgctxt "QCoreApplication|"
0407 msgid "Unexpected token %1"
0408 msgstr "Oväntad symbol %1"
0409
0410 #: analitza/expressiontypechecker.cpp:301
0411 #, qt-format
0412 msgctxt "QCoreApplication|"
0413 msgid "Could not find a type that unifies '%1'"
0414 msgstr "Kunde inte hitta en typ som förenar '%1'"
0415
0416 #: analitza/expressiontypechecker.cpp:473
0417 msgctxt "QCoreApplication|"
0418 msgid "The domain should be either a vector or a list"
0419 msgstr "Domänen måste antingen vara en vektor eller en lista"
0420
0421 #: analitza/expressiontypechecker.cpp:558
0422 #, qt-format
0423 msgctxt "type error message|"
0424 msgid "Cannot call '%1'"
0425 msgstr "Kan inte anropa '%1'"
0426
0427 #: analitza/expressiontypechecker.cpp:593
0428 #, qt-format
0429 msgctxt "QCoreApplication|"
0430 msgid "Cannot reduce '%1' to '%2'. Invalid type of parameter '%3' for '%4'"
0431 msgstr "Kan inte reducera '%1' till '%2'. Ogiltig parametertyp '%3' för '%4'"
0432
0433 #: analitza/expressiontypechecker.cpp:604
0434 #, qt-format
0435 msgctxt "QCoreApplication|"
0436 msgid "Invalid parameter count for '%2'. Should have %1 parameters."
0437 msgstr "Felaktigt antal parametrar för '%2'. Ska ha %1 parametrar."
0438
0439 #: analitza/expressiontypechecker.cpp:616
0440 #, qt-format
0441 msgctxt "QCoreApplication|"
0442 msgid "Cannot compare '%1' to '%2'. Invalid type of parameter '%3' for '%4'"
0443 msgstr "Kan inte jämföra '%1' med '%2'. Ogiltig parametertyp '%3' för '%4'"
0444
0445 #: analitza/expressiontypechecker.cpp:654
0446 #, qt-format
0447 msgctxt "QCoreApplication|"
0448 msgid "Could not call '%1'"
0449 msgstr "Kunde inte anropa '%1'"
0450
0451 #: analitza/expressiontypechecker.cpp:662
0452 #, qt-format
0453 msgctxt "QCoreApplication|"
0454 msgid "Could not solve '%1'"
0455 msgstr "Kunde inte lösa '%1'"
0456
0457 #: analitza/expressiontypechecker.cpp:695
0458 #, qt-format
0459 msgctxt "QCoreApplication|"
0460 msgid "Incoherent type for the variable '%1'"
0461 msgstr "Osammanhängande typ för variabeln '%1'"
0462
0463 #: analitza/expressiontypechecker.cpp:718
0464 msgctxt "QCoreApplication|"
0465 msgid "Could not determine the type for piecewise"
0466 msgstr "Kunde inte bestämma typ för piecewise"
0467
0468 #: analitza/expressiontypechecker.cpp:937
0469 msgctxt "QCoreApplication|"
0470 msgid "Unexpected type"
0471 msgstr "Oväntad typ"
0472
0473 #: analitza/expressiontypechecker.cpp:960
0474 #, qt-format
0475 msgctxt "QCoreApplication|"
0476 msgid "Cannot convert '%1' to '%2'"
0477 msgstr "Kan inte konvertera '%1' till '%2'"
0478
0479 #: analitza/htmlexpressionwriter.cpp:54 analitza/htmlexpressionwriter.cpp:55
0480 #, qt-format
0481 msgctxt "html representation of an operator|"
0482 msgid "<span class='op'>%1</span>"
0483 msgstr "<span class='op'>%1</span>"
0484
0485 #: analitza/htmlexpressionwriter.cpp:56
0486 #, qt-format
0487 msgctxt "html representation of an operator|"
0488 msgid "<span class='keyword'>%1</span>"
0489 msgstr "<span class='keyword'>%1</span>"
0490
0491 #: analitza/mathmlpresentationlexer.cpp:94
0492 #, qt-format
0493 msgctxt "Error message|"
0494 msgid "Unknown token '%1'"
0495 msgstr "Okänd symbol '%1'"
0496
0497 #: analitza/operations.cpp:54 analitza/operations.cpp:191
0498 msgctxt "QCoreApplication|"
0499 msgid "Cannot divide by 0."
0500 msgstr "Kan inte dividera med 0."
0501
0502 #: analitza/operations.cpp:72 analitza/operations.cpp:203
0503 msgctxt "QCoreApplication|"
0504 msgid "Cannot calculate the remainder on 0."
0505 msgstr "Kan inte beräkna resten för 0."
0506
0507 #: analitza/operations.cpp:84 analitza/operations.cpp:213
0508 msgctxt "QCoreApplication|"
0509 msgid "Cannot calculate the factor on 0."
0510 msgstr "Kan inte beräkna faktorn för 0."
0511
0512 #: analitza/operations.cpp:140 analitza/operations.cpp:261
0513 msgctxt "QCoreApplication|"
0514 msgid "Cannot calculate the lcm of 0."
0515 msgstr "Kan inte beräkna minsta gemensamma faktor för 0."
0516
0517 #: analitza/operations.cpp:246
0518 msgctxt "QCoreApplication|"
0519 msgid "Boolean operations on complex numbers not available"
0520 msgstr "Booleska operationer för komplexa tal är inte tillgängliga"
0521
0522 #: analitza/operations.cpp:276
0523 msgctxt "QCoreApplication|"
0524 msgid "Only square root implemented for complex numbers"
0525 msgstr "Bara kvadratrot implementerad för komplexa tal"
0526
0527 #: analitza/operations.cpp:351 analitza/operations.cpp:463
0528 #, qt-format
0529 msgctxt "QCoreApplication|"
0530 msgid "Could not calculate a value %1"
0531 msgstr "Kunde inte beräkna ett värde %1"
0532
0533 #: analitza/operations.cpp:479
0534 #, qt-format
0535 msgctxt "QCoreApplication|"
0536 msgid "Cannot calculate %1 between a value and an error type"
0537 msgstr "Kan inte beräkna %1 mellan ett värde och en feltyp"
0538
0539 #: analitza/operations.cpp:495 analitza/operations.cpp:652
0540 #: analitza/operations.cpp:784
0541 msgctxt "QCoreApplication|"
0542 msgid "Invalid index for a container"
0543 msgstr "Ogiltigt index för en behållare"
0544
0545 #: analitza/operations.cpp:527
0546 #, qt-format
0547 msgctxt "QCoreApplication|"
0548 msgid "Cannot operate '%1' on different sized vectors."
0549 msgstr "Kan inte utföra '%1' med vektorer av olika storlek."
0550
0551 #: analitza/operations.cpp:566
0552 msgctxt "QCoreApplication|"
0553 msgid ""
0554 "Multiplication between a matrix and a vector is allowed provided that the "
0555 "number of columns of the matrix equals the size of the vector"
0556 msgstr ""
0557 "Multiplikation av en matris och en vektor tillåts under förutsättning att "
0558 "matrisens antal kolumner är lika med vektorns storlek"
0559
0560 #: analitza/operations.cpp:570 analitza/operations.cpp:707
0561 msgctxt "QCoreApplication|"
0562 msgid "Matrix and vector entries must be numbers"
0563 msgstr "Matris- och vektorvärden måste vara tal"
0564
0565 #: analitza/operations.cpp:599
0566 #, qt-format
0567 msgctxt "QCoreApplication|"
0568 msgid "Could not calculate a vector's %1"
0569 msgstr "Kunde inte beräkna en vektors %1"
0570
0571 #: analitza/operations.cpp:621 analitza/operations.cpp:637
0572 #, qt-format
0573 msgctxt "QCoreApplication|"
0574 msgid "Could not calculate a list's %1"
0575 msgstr "Kunde inte beräkna en listas %1"
0576
0577 #: analitza/operations.cpp:703
0578 msgctxt "QCoreApplication|"
0579 msgid ""
0580 "Multiplication between a vector and a matrix is allowed provided that the "
0581 "matrix has only one matrixrow element"
0582 msgstr ""
0583 "Multiplikation av en vektor och en matris tillåts under förutsättning att "
0584 "matrisen bara har ett radelement"
0585
0586 #: analitza/operations.cpp:730
0587 msgctxt "QCoreApplication|"
0588 msgid ""
0589 "Addition of two matrices is allowed provided that both matrices have the "
0590 "same number of rows and the same number of columns"
0591 msgstr ""
0592 "Addition av två matriser tillåts under förutsättning att båda matriser har "
0593 "samma antal rader och samma antal kolumner"
0594
0595 #: analitza/operations.cpp:762
0596 msgctxt "QCoreApplication|"
0597 msgid ""
0598 "Multiplication of two matrices is allowed provided that the number of "
0599 "columns of the first matrix equals the number of rows of the second matrix"
0600 msgstr ""
0601 "Multiplikation av två matriser tillåts under förutsättning att den första "
0602 "matrisens antal kolumner är lika med den andra matrisens antal rader"
0603
0604 #: analitza/operations.cpp:766 analitza/operations.cpp:804
0605 #: analitza/operations.cpp:887
0606 msgctxt "QCoreApplication|"
0607 msgid "Matrix entries must be numbers"
0608 msgstr "Matrisvärden måste vara tal"
0609
0610 #: analitza/operations.cpp:879
0611 msgctxt "QCoreApplication|"
0612 msgid "The exponent of 'power' must be some integer number"
0613 msgstr "Exponenten för 'upphöjt till' måste vara ett heltal"
0614
0615 #: analitza/operations.cpp:883
0616 msgctxt "QCoreApplication|"
0617 msgid "Cannot compute 'power' for non square matrix"
0618 msgstr "Kan inte beräkna 'upphöjt till' för matriser som inte är kvadratiska"
0619
0620 #: analitza/operations.cpp:922
0621 #, qt-format
0622 msgctxt "QCoreApplication|"
0623 msgid "Cannot calculate %1 between a matrix and an error type"
0624 msgstr "Kan inte beräkna %1 mellan en matris och en feltyp"
0625
0626 #: analitza/providederivative.cpp:93
0627 #, qt-format
0628 msgctxt "QCoreApplication|"
0629 msgid "Could not calculate the derivative for '%1'"
0630 msgstr "Kunde inte beräkna derivatan av '%1'"
0631
0632 #: analitzagui/operatorsmodel.cpp:95 analitzagui/variablesmodel.cpp:91
0633 #: analitzaplot/plotsdictionarymodel.cpp:36 analitzaplot/plotsmodel.cpp:78
0634 msgctxt "@title:column|"
0635 msgid "Name"
0636 msgstr "Namn"
0637
0638 #: analitzagui/operatorsmodel.cpp:98
0639 msgctxt "@title:column|"
0640 msgid "Description"
0641 msgstr "Beskrivning"
0642
0643 #: analitzagui/operatorsmodel.cpp:101
0644 msgctxt "@title:column|"
0645 msgid "Parameters"
0646 msgstr "Parametrar"
0647
0648 #: analitzagui/operatorsmodel.cpp:104
0649 msgctxt "@title:column|"
0650 msgid "Example"
0651 msgstr "Exempel"
0652
0653 #: analitzagui/operatorsmodel.cpp:135
0654 msgctxt "Syntax for function bounding|"
0655 msgid " : var"
0656 msgstr " : var"
0657
0658 #: analitzagui/operatorsmodel.cpp:137
0659 msgctxt "Syntax for function bounding values|"
0660 msgid "=from..to"
0661 msgstr "=från..till"
0662
0663 #: analitzagui/operatorsmodel.cpp:140
0664 #, qt-format
0665 msgctxt "QCoreApplication|"
0666 msgid "%1("
0667 msgstr "%1("
0668
0669 #: analitzagui/operatorsmodel.cpp:143
0670 #, qt-format
0671 msgctxt "QCoreApplication|"
0672 msgid "%1... parameters, ...%2)"
0673 msgstr "%1 ..., parametrar, ...%2)"
0674
0675 #: analitzagui/operatorsmodel.cpp:146
0676 #, qt-format
0677 msgctxt "QCoreApplication|"
0678 msgid "par%1"
0679 msgstr "par%1"
0680
0681 #: analitzagui/operatorsmodel.cpp:159
0682 msgctxt "QCoreApplication|"
0683 msgid "Addition"
0684 msgstr "Addition"
0685
0686 #: analitzagui/operatorsmodel.cpp:162
0687 msgctxt "QCoreApplication|"
0688 msgid "Multiplication"
0689 msgstr "Multiplikation"
0690
0691 #: analitzagui/operatorsmodel.cpp:165
0692 msgctxt "QCoreApplication|"
0693 msgid "Division"
0694 msgstr "Division"
0695
0696 #: analitzagui/operatorsmodel.cpp:168
0697 msgctxt "QCoreApplication|"
0698 msgid "Subtraction. Will remove all values from the first one."
0699 msgstr "Subtraktion. Tar bort alla värden från det första."
0700
0701 #: analitzagui/operatorsmodel.cpp:171
0702 msgctxt "QCoreApplication|"
0703 msgid "Power"
0704 msgstr "Upphöjt till"
0705
0706 #: analitzagui/operatorsmodel.cpp:174
0707 msgctxt "QCoreApplication|"
0708 msgid "Remainder"
0709 msgstr "Rest"
0710
0711 #: analitzagui/operatorsmodel.cpp:177
0712 msgctxt "QCoreApplication|"
0713 msgid "Quotient"
0714 msgstr "Kvot"
0715
0716 #: analitzagui/operatorsmodel.cpp:180
0717 msgctxt "QCoreApplication|"
0718 msgid "The factor of"
0719 msgstr "Faktorn av"
0720
0721 #: analitzagui/operatorsmodel.cpp:183
0722 msgctxt "QCoreApplication|"
0723 msgid "Factorial. factorial(n)=n!"
0724 msgstr "Fakultet. factorial(n)=n!"
0725
0726 #: analitzagui/operatorsmodel.cpp:186
0727 msgctxt "QCoreApplication|"
0728 msgid "Function to calculate the sine of a given angle"
0729 msgstr "Funktion för att beräkna sinus för en given vinkel"
0730
0731 #: analitzagui/operatorsmodel.cpp:189
0732 msgctxt "QCoreApplication|"
0733 msgid "Function to calculate the cosine of a given angle"
0734 msgstr "Funktion för att beräkna cosinus för en given vinkel"
0735
0736 #: analitzagui/operatorsmodel.cpp:192
0737 msgctxt "QCoreApplication|"
0738 msgid "Function to calculate the tangent of a given angle"
0739 msgstr "Funktion för att beräkna tangens för en given vinkel"
0740
0741 #: analitzagui/operatorsmodel.cpp:195
0742 msgctxt "QCoreApplication|"
0743 msgid "Secant"
0744 msgstr "Sekant"
0745
0746 #: analitzagui/operatorsmodel.cpp:198
0747 msgctxt "QCoreApplication|"
0748 msgid "Cosecant"
0749 msgstr "Cosekant"
0750
0751 #: analitzagui/operatorsmodel.cpp:201
0752 msgctxt "QCoreApplication|"
0753 msgid "Cotangent"
0754 msgstr "Cotangens"
0755
0756 #: analitzagui/operatorsmodel.cpp:204
0757 msgctxt "QCoreApplication|"
0758 msgid "Hyperbolic sine"
0759 msgstr "Hyperbolisk sinus"
0760
0761 #: analitzagui/operatorsmodel.cpp:207
0762 msgctxt "QCoreApplication|"
0763 msgid "Hyperbolic cosine"
0764 msgstr "Hyperbolisk cosinus"
0765
0766 #: analitzagui/operatorsmodel.cpp:210
0767 msgctxt "QCoreApplication|"
0768 msgid "Hyperbolic tangent"
0769 msgstr "Hyperbolisk tangens"
0770
0771 #: analitzagui/operatorsmodel.cpp:213
0772 msgctxt "QCoreApplication|"
0773 msgid "Hyperbolic secant"
0774 msgstr "Hyperbolisk sekant"
0775
0776 #: analitzagui/operatorsmodel.cpp:216
0777 msgctxt "QCoreApplication|"
0778 msgid "Hyperbolic cosecant"
0779 msgstr "Hyperbolisk cosekant"
0780
0781 #: analitzagui/operatorsmodel.cpp:219
0782 msgctxt "QCoreApplication|"
0783 msgid "Hyperbolic cotangent"
0784 msgstr "Hyperbolisk cotangens"
0785
0786 #: analitzagui/operatorsmodel.cpp:222
0787 msgctxt "QCoreApplication|"
0788 msgid "Arc sine"
0789 msgstr "Arcus sinus"
0790
0791 #: analitzagui/operatorsmodel.cpp:225
0792 msgctxt "QCoreApplication|"
0793 msgid "Arc cosine"
0794 msgstr "Arcus cosinus"
0795
0796 #: analitzagui/operatorsmodel.cpp:228
0797 msgctxt "QCoreApplication|"
0798 msgid "Arc tangent"
0799 msgstr "Arcus tangens"
0800
0801 #: analitzagui/operatorsmodel.cpp:231
0802 msgctxt "QCoreApplication|"
0803 msgid "Arc cotangent"
0804 msgstr "Arcus cotangens"
0805
0806 #: analitzagui/operatorsmodel.cpp:237
0807 msgctxt "QCoreApplication|"
0808 msgid "Hyperbolic arc tangent"
0809 msgstr "Hyperbolisk arcus tangens"
0810
0811 #: analitzagui/operatorsmodel.cpp:240
0812 msgctxt "QCoreApplication|"
0813 msgid "Summatory"
0814 msgstr "Summa"
0815
0816 #: analitzagui/operatorsmodel.cpp:243
0817 msgctxt "QCoreApplication|"
0818 msgid "Productory"
0819 msgstr "Produkt"
0820
0821 #: analitzagui/operatorsmodel.cpp:246
0822 msgctxt "QCoreApplication|"
0823 msgid "For all"
0824 msgstr "För alla"
0825
0826 #: analitzagui/operatorsmodel.cpp:249
0827 msgctxt "QCoreApplication|"
0828 msgid "Exists"
0829 msgstr "Finns"
0830
0831 #: analitzagui/operatorsmodel.cpp:252
0832 msgctxt "QCoreApplication|"
0833 msgid "Differentiation"
0834 msgstr "Derivering"
0835
0836 #: analitzagui/operatorsmodel.cpp:255
0837 msgctxt "QCoreApplication|"
0838 msgid "Hyperbolic arc sine"
0839 msgstr "Hyperbolisk arcus sinus"
0840
0841 #: analitzagui/operatorsmodel.cpp:258
0842 msgctxt "QCoreApplication|"
0843 msgid "Hyperbolic arc cosine"
0844 msgstr "Hyperbolisk arcus cosinus"
0845
0846 #: analitzagui/operatorsmodel.cpp:261
0847 msgctxt "QCoreApplication|"
0848 msgid "Arc cosecant"
0849 msgstr "Arcus cosekant"
0850
0851 #: analitzagui/operatorsmodel.cpp:264
0852 msgctxt "QCoreApplication|"
0853 msgid "Hyperbolic arc cosecant"
0854 msgstr "Hyperbolisk arcus cosekant"
0855
0856 #: analitzagui/operatorsmodel.cpp:267
0857 msgctxt "QCoreApplication|"
0858 msgid "Arc secant"
0859 msgstr "Arcus sekant"
0860
0861 #: analitzagui/operatorsmodel.cpp:270
0862 msgctxt "QCoreApplication|"
0863 msgid "Hyperbolic arc secant"
0864 msgstr "Hyperbolisk arcus sekant"
0865
0866 #: analitzagui/operatorsmodel.cpp:273
0867 msgctxt "QCoreApplication|"
0868 msgid "Exponent (e^x)"
0869 msgstr "Exponent (e^x)"
0870
0871 #: analitzagui/operatorsmodel.cpp:276
0872 msgctxt "QCoreApplication|"
0873 msgid "Base-e logarithm"
0874 msgstr "Bas-e logaritm"
0875
0876 #: analitzagui/operatorsmodel.cpp:279
0877 msgctxt "QCoreApplication|"
0878 msgid "Base-10 logarithm"
0879 msgstr "Bas-10 logaritm"
0880
0881 #: analitzagui/operatorsmodel.cpp:282
0882 msgctxt "QCoreApplication|"
0883 msgid "Absolute value. abs(n)=|n|"
0884 msgstr "Absolutvärde. abs(n) = |n|"
0885
0886 #: analitzagui/operatorsmodel.cpp:285
0887 msgctxt "QCoreApplication|"
0888 msgid "Conjugate"
0889 msgstr "Konjugat"
0890
0891 #: analitzagui/operatorsmodel.cpp:288
0892 msgctxt "QCoreApplication|"
0893 msgid "Arg"
0894 msgstr "Argument"
0895
0896 #: analitzagui/operatorsmodel.cpp:291
0897 msgctxt "QCoreApplication|"
0898 msgid "Real"
0899 msgstr "Realdel"
0900
0901 #: analitzagui/operatorsmodel.cpp:294
0902 msgctxt "QCoreApplication|"
0903 msgid "Imaginary"
0904 msgstr "Imaginärdel"
0905
0906 #: analitzagui/operatorsmodel.cpp:297
0907 msgctxt "QCoreApplication|"
0908 msgid "Floor value. floor(n)=⌊n⌋"
0909 msgstr "Golvfunktionens värde. floor(n) = ⌊n⌋"
0910
0911 #: analitzagui/operatorsmodel.cpp:300
0912 msgctxt "QCoreApplication|"
0913 msgid "Ceil value. ceil(n)=⌈n⌉"
0914 msgstr "Takfunktionens värde. ceil(n) =⌈n⌉"
0915
0916 #: analitzagui/operatorsmodel.cpp:303
0917 msgctxt "QCoreApplication|"
0918 msgid "Minimum"
0919 msgstr "Minimum"
0920
0921 #: analitzagui/operatorsmodel.cpp:306
0922 msgctxt "QCoreApplication|"
0923 msgid "Maximum"
0924 msgstr "Maximum"
0925
0926 #: analitzagui/operatorsmodel.cpp:309
0927 msgctxt "QCoreApplication|"
0928 msgid "Greater than. gt(a,b)=a>b"
0929 msgstr "Större än. gt(a,b) = a>b"
0930
0931 #: analitzagui/operatorsmodel.cpp:312
0932 msgctxt "QCoreApplication|"
0933 msgid "Less than. lt(a,b)=a<b"
0934 msgstr "Mindre än. lt(a,b) = a<b"
0935
0936 #: analitzagui/operatorsmodel.cpp:315
0937 msgctxt "QCoreApplication|"
0938 msgid "Equal. eq(a,b) = a=b"
0939 msgstr "Lika med. eq(a,) = a=b"
0940
0941 #: analitzagui/operatorsmodel.cpp:318
0942 msgctxt "QCoreApplication|"
0943 msgid "Approximation. approx(a)=a±n"
0944 msgstr "Approximation. approx(a) = a±n"
0945
0946 #: analitzagui/operatorsmodel.cpp:321
0947 msgctxt "QCoreApplication|"
0948 msgid "Not equal. neq(a,b)=a≠b"
0949 msgstr "Inte lika med. neq(a,b) = a≠b"
0950
0951 #: analitzagui/operatorsmodel.cpp:324
0952 msgctxt "QCoreApplication|"
0953 msgid "Greater or equal. geq(a,b)=a≥b"
0954 msgstr "Större än eller lika med. geq(a,b) = a≥b"
0955
0956 #: analitzagui/operatorsmodel.cpp:327
0957 msgctxt "QCoreApplication|"
0958 msgid "Less or equal. leq(a,b)=a≤b"
0959 msgstr "Mindre än eller lika med. leq(a,b) = a≤b"
0960
0961 #: analitzagui/operatorsmodel.cpp:330
0962 msgctxt "QCoreApplication|"
0963 msgid "Boolean and"
0964 msgstr "Logiskt och"
0965
0966 #: analitzagui/operatorsmodel.cpp:333
0967 msgctxt "QCoreApplication|"
0968 msgid "Boolean not"
0969 msgstr "Logisk negation"
0970
0971 #: analitzagui/operatorsmodel.cpp:336
0972 msgctxt "QCoreApplication|"
0973 msgid "Boolean or"
0974 msgstr "Logiskt eller"
0975
0976 #: analitzagui/operatorsmodel.cpp:339
0977 msgctxt "QCoreApplication|"
0978 msgid "Boolean xor"
0979 msgstr "Logiskt exklusivt eller"
0980
0981 #: analitzagui/operatorsmodel.cpp:342
0982 msgctxt "QCoreApplication|"
0983 msgid "Boolean implication"
0984 msgstr "Logisk implikation"
0985
0986 #: analitzagui/operatorsmodel.cpp:345
0987 msgctxt "QCoreApplication|"
0988 msgid "Greatest common divisor"
0989 msgstr "Största gemensamma delare"
0990
0991 #: analitzagui/operatorsmodel.cpp:348
0992 msgctxt "QCoreApplication|"
0993 msgid "Least common multiple"
0994 msgstr "Minsta gemensamma multipel"
0995
0996 #: analitzagui/operatorsmodel.cpp:351
0997 msgctxt "QCoreApplication|"
0998 msgid "Root"
0999 msgstr "Rot"
1000
1001 #: analitzagui/operatorsmodel.cpp:354
1002 msgctxt "QCoreApplication|"
1003 msgid "Cardinal"
1004 msgstr "Grundtal"
1005
1006 #: analitzagui/operatorsmodel.cpp:357
1007 msgctxt "QCoreApplication|"
1008 msgid "Scalar product"
1009 msgstr "Skalärprodukt"
1010
1011 #: analitzagui/operatorsmodel.cpp:360
1012 msgctxt "QCoreApplication|"
1013 msgid "Select the par1-th element of par2 list or vector"
1014 msgstr "Välj element par1 i listan eller vektorn par2"
1015
1016 #: analitzagui/operatorsmodel.cpp:363
1017 msgctxt "QCoreApplication|"
1018 msgid "Joins several items of the same type"
1019 msgstr "Sammanfogar flera objekt av samma typ"
1020
1021 #: analitzagui/operatorsmodel.cpp:366
1022 msgctxt "QCoreApplication|"
1023 msgid "Applies a function to every element in a list"
1024 msgstr "Beräknar en funktion för varje element i en lista"
1025
1026 #: analitzagui/operatorsmodel.cpp:369
1027 msgctxt "QCoreApplication|"
1028 msgid "Removes all elements that don't fit a condition"
1029 msgstr "Tar bort alla element som inte uppfyller ett villkor"
1030
1031 #: analitzagui/operatorsmodel.cpp:372
1032 msgctxt "QCoreApplication|"
1033 msgid "Transpose"
1034 msgstr "Transponera"
1035
1036 #: analitzagui/operatorsmodel.cpp:572
1037 #, qt-format
1038 msgctxt "n-ary function prototype|"
1039 msgid "<em>%1</em>(..., <b>par%2</b>, ...)"
1040 msgstr "<em>%1</em>(..., <b>par%2</b>, ...)"
1041
1042 #: analitzagui/operatorsmodel.cpp:582
1043 #, qt-format
1044 msgctxt "Function name in function prototype|"
1045 msgid "<em>%1</em>("
1046 msgstr "<em>%1</em>("
1047
1048 #: analitzagui/operatorsmodel.cpp:583
1049 #, qt-format
1050 msgctxt "Uncorrect function name in function prototype|"
1051 msgid "<em style='color:red'><b>%1</b></em>("
1052 msgstr "<em style='color:red'><b>%1</b></em>("
1053
1054 #: analitzagui/operatorsmodel.cpp:586
1055 #, qt-format
1056 msgctxt "Parameter in function prototype|"
1057 msgid "par%1"
1058 msgstr "par%1"
1059
1060 #: analitzagui/operatorsmodel.cpp:589 analitzagui/operatorsmodel.cpp:599
1061 #, qt-format
1062 msgctxt "Current parameter in function prototype|"
1063 msgid "<b>%1</b>"
1064 msgstr "<b>%1</b>"
1065
1066 #: analitzagui/operatorsmodel.cpp:592
1067 msgctxt "Function parameter separator|"
1068 msgid ", "
1069 msgstr ", "
1070
1071 #: analitzagui/operatorsmodel.cpp:596
1072 msgctxt "Current parameter is the bounding|"
1073 msgid " : bounds"
1074 msgstr " : gränser"
1075
1076 #: analitzagui/variablesmodel.cpp:94
1077 msgctxt "@title:column|"
1078 msgid "Value"
1079 msgstr "Värde"
1080
1081 #: analitzaplot/plotsfactory.cpp:49
1082 msgctxt "QCoreApplication|"
1083 msgid "The expression is not correct"
1084 msgstr "Uttrycket är inte riktigt"
1085
1086 #: analitzaplot/plotsfactory.cpp:72
1087 #, qt-format
1088 msgctxt "QCoreApplication|"
1089 msgid "Function type '%1' not recognized"
1090 msgstr "Funktionstypen '%1' känns inte igen"
1091
1092 #: analitzaplot/plotsfactory.cpp:74
1093 #, qt-format
1094 msgctxt "QCoreApplication|"
1095 msgid "Function '%1' not recognized"
1096 msgstr "Funktion '%1' känns inte igen"
1097
1098 #: analitzaplot/plotsmodel.cpp:79
1099 msgctxt "@title:column|"
1100 msgid "Plot"
1101 msgstr "Diagram"
1102
1103 #: analitzaplot/plotter3d_es.cpp:534 declarative/graph2dmobile.cpp:141
1104 msgctxt "QObject|"
1105 msgid "PNG Image (*.png)"
1106 msgstr "PNG-bild (*.png)"
1107
1108 #: analitzaplot/plotter3d_es.cpp:534
1109 msgctxt "QObject|"
1110 msgid "PDF Document (*.pdf)"
1111 msgstr "PDF-dokument (*.pdf)"
1112
1113 #: analitzaplot/plotter3d_es.cpp:534
1114 msgctxt "QObject|"
1115 msgid "X3D Document (*.x3d)"
1116 msgstr "X3D-dokument (*.x3d)"
1117
1118 #: analitzaplot/plotter3d_es.cpp:534
1119 msgctxt "QObject|"
1120 msgid "STL Document (*.stl)"
1121 msgstr "STL-dokument (*.stl)"
1122
1123 #: analitzaplot/private/backends/cartesiancurve.cpp:64
1124 msgctxt "Function type|"
1125 msgid "Plane Curve F(y)"
1126 msgstr "Plankurva F(y)"
1127
1128 #: analitzaplot/private/backends/cartesiancurve.cpp:80
1129 msgctxt "Function type|"
1130 msgid "Plane Curve F(x)"
1131 msgstr "Plankurva F(x)"
1132
1133 #: analitzaplot/private/backends/cartesiancurve.cpp:137
1134 #: analitzaplot/private/backends/cartesiancurve.cpp:245
1135 msgctxt "QCoreApplication|"
1136 msgid "We can only draw Real results."
1137 msgstr "Det går bara att rita reella resultat."
1138
1139 #: analitzaplot/private/backends/cartesiancurve.cpp:248
1140 #: analitzawidgets/plotsview2d.cpp:236
1141 #, qt-format
1142 msgctxt "QCoreApplication|"
1143 msgid "x=%1 y=%2"
1144 msgstr "x=%1 y=%2"
1145
1146 #: analitzaplot/private/backends/cartesiansurface.cpp:52
1147 msgctxt "Function type|"
1148 msgid "Surface z=F(x,y)"
1149 msgstr "Yta z=F(x,y)"
1150
1151 #: analitzaplot/private/backends/cartesiansurface.cpp:94
1152 msgctxt "Function type|"
1153 msgid "Surface y=F(x,z)"
1154 msgstr "Yta y=F(x,z)"
1155
1156 #: analitzaplot/private/backends/cartesiansurface.cpp:127
1157 msgctxt "Function type|"
1158 msgid "Surface x=F(y,z)"
1159 msgstr "Yta x=F(y,z)"
1160
1161 #: analitzaplot/private/backends/cylindricalsurface.cpp:37
1162 msgctxt "Function type|"
1163 msgid "Cylindrical Surface z=F(r: Radial, p: Polar)"
1164 msgstr "Cylindrisk yta z=F(r: radiell, p: polär)"
1165
1166 #: analitzaplot/private/backends/implicitcurve.cpp:44
1167 msgctxt "Function type|"
1168 msgid "Implicit Curve"
1169 msgstr "Implicit kurva"
1170
1171 #: analitzaplot/private/backends/implicitpolarcurve.cpp:37
1172 msgctxt "Function type|"
1173 msgid "Polar implicit Curve 0=F(r: Radial, p: Polar)"
1174 msgstr "Polär implicit kurva  0=F(r: radiell, p: polär)"
1175
1176 #: analitzaplot/private/backends/implicitsurface.cpp:35
1177 msgctxt "Function type|"
1178 msgid "Implicit Surface"
1179 msgstr "Implicit yta"
1180
1181 #: analitzaplot/private/backends/parametriccurve2d.cpp:37
1182 msgctxt "Function type|"
1183 msgid "Parametric Curve 2D"
1184 msgstr "Parametrisk tvådimensionell kurva"
1185
1186 #: analitzaplot/private/backends/parametriccurve3d.cpp:31
1187 msgctxt "Function type|"
1188 msgid "Parametric Curve 3D"
1189 msgstr "Parametrisk tredimensionell kurva"
1190
1191 #: analitzaplot/private/backends/parametricsurface.cpp:32
1192 msgctxt "Function type|"
1193 msgid "Parametric Surface"
1194 msgstr "Parametrisk yta"
1195
1196 #: analitzaplot/private/backends/polarcurve.cpp:37
1197 msgctxt "Function type|"
1198 msgid "Polar Curve r=F(p: Polar)"
1199 msgstr "Polär kurva r=F(p: polär)"
1200
1201 #: analitzaplot/private/backends/sphericalsurface.cpp:35
1202 msgctxt "Function type|"
1203 msgid "Spherical Surface Radial=F(t:Azimuth, p: Polar)"
1204 msgstr "Sfärisk yta Radiell=F(t:azimut, p: polär)"
1205
1206 #: analitzawidgets/expressionedit.cpp:295
1207 #, qt-format
1208 msgctxt "QCoreApplication|"
1209 msgid "Result: %1"
1210 msgstr "Resultat: %1"
1211
1212 #: analitzawidgets/expressionedit.cpp:405
1213 msgctxt "QCoreApplication|"
1214 msgid "To Expression"
1215 msgstr "Till uttryck"
1216
1217 #: analitzawidgets/expressionedit.cpp:407
1218 msgctxt "QCoreApplication|"
1219 msgid "To MathML"
1220 msgstr "Till MathML"
1221
1222 #: analitzawidgets/expressionedit.cpp:409
1223 msgctxt "QCoreApplication|"
1224 msgid "Simplify"
1225 msgstr "Förenkla"
1226
1227 #: analitzawidgets/expressionedit.cpp:411
1228 msgctxt "QCoreApplication|"
1229 msgid "Examples"
1230 msgstr "Exempel"
1231
1232 #: analitzawidgets/plotsview2d.cpp:214
1233 msgctxt "QCoreApplication|"
1234 msgid "Selected viewport too small"
1235 msgstr "Vald vy för liten"
1236
1237 #~ msgctxt "QObject|"
1238 #~ msgid "PNG File (*.png)"
1239 #~ msgstr "PNG-fil (*.png)"
1240
1241 #~ msgctxt "NAME OF TRANSLATORS"
1242 #~ msgid "Your names"
1243 #~ msgstr "Stefan Asserhäll"
1244
1245 #~ msgctxt "EMAIL OF TRANSLATORS"
1246 #~ msgid "Your emails"
1247 #~ msgstr "stefan.asserhall@bredband.net"
1248
1249 #~ msgctxt "Parameter in function prototype"
1250 #~ msgid "par%1"
1251 #~ msgstr "par%1"
1252
1253 #~ msgctxt "Function parameter separator"
1254 #~ msgid ", "
1255 #~ msgstr ", "
1256
1257 #, fuzzy
1258 #~| msgid "Hyperbolic secant"
1259 #~ msgctxt "dictionary"
1260 #~ msgid "Hiperbola"
1261 #~ msgstr "Hyperbolisk sekant"
1262
1263 #~ msgid "Function type not correct for functions depending on %1"
1264 #~ msgstr "Funktionstypen inte riktig för funktioner som beror på %1"
1265
1266 #~ msgctxt ""
1267 #~ "This function can't be represented as a curve. To draw implicit curve, "
1268 #~ "the function has to satisfy the implicit function theorem."
1269 #~ msgid "Implicit function undefined in the plane"
1270 #~ msgstr "Implicit funktion odefinierad i planet"
1271
1272 #~ msgid "center"
1273 #~ msgstr "centrera"
1274
1275 #~ msgctxt "@title:column"
1276 #~ msgid "Function"
1277 #~ msgstr "Funktion"
1278
1279 #~ msgid "%1 function added"
1280 #~ msgstr "%1 funktion tillagd"
1281
1282 #~ msgid "Hide '%1'"
1283 #~ msgstr "Dölj '%1'"
1284
1285 #~ msgid "Show '%1'"
1286 #~ msgstr "Visa '%1'"
1287
1288 #~ msgid "Remove '%1'"
1289 #~ msgstr "Ta bort '%1'"
1290
1291 #~ msgctxt "Error message"
1292 #~ msgid "Unknown token %1"
1293 #~ msgstr "Okänd symbol %1"