poqm/hu/analitza_qt.po

0001 # Copyright (C) YEAR This_file_is_part_of_KDE
0002 # This file is distributed under the same license as the PACKAGE package.
0003 #
0004 # Kristóf Kiszel <ulysses@kubuntu.org>, 2011, 2012, 2015.
0005 # Balázs Úr <urbalazs@gmail.com>, 2012, 2013.
0006 # Kiszel Kristóf <kiszel.kristof@gmail.com>, 2017, 2021.
0007 # Kristof Kiszel <ulysses@fsf.hu>, 2021.
0008 msgid ""
0009 msgstr ""
0010 "Project-Id-Version: \n"
0011 "Report-Msgid-Bugs-To: http://bugs.kde.org\n"
0012 "POT-Creation-Date: 2014-02-16 03:26+0000\n"
0013 "PO-Revision-Date: 2021-11-18 13:45+0100\n"
0014 "Last-Translator: Kristof Kiszel <ulysses@fsf.hu>\n"
0015 "Language-Team: Hungarian <kde-l10n-hu@kde.org>\n"
0016 "Language: hu\n"
0017 "MIME-Version: 1.0\n"
0018 "Content-Type: text/plain; charset=UTF-8\n"
0019 "Content-Transfer-Encoding: 8bit\n"
0020 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
0021 "X-Generator: Lokalize 21.08.3\n"
0022 "X-Qt-Contexts: true\n"
0023
0024 msgctxt "QObject|dictionary"
0025 msgid "xaxaxaxaxa"
0026 msgstr "xaxaxaxaxa"
0027
0028 msgctxt "QObject|dictionary"
0029 msgid "cosa"
0030 msgstr "cosa"
0031
0032 #: analitza/analyzer.cpp:193
0033 msgctxt "QCoreApplication|"
0034 msgid "Cannot calculate an empty expression"
0035 msgstr "Nem lehet kiszámolni az üres kifejezést"
0036
0037 #: analitza/analyzer.cpp:240 analitza/analyzer.cpp:259
0038 #: analitza/analyzer.cpp:285
0039 msgctxt "QCoreApplication|"
0040 msgid "Must specify a correct operation"
0041 msgstr "Helyes műveletet kell megadni"
0042
0043 #: analitza/analyzer.cpp:255 analitza/analyzer.cpp:288
0044 #, qt-format
0045 msgctxt "QCoreApplication|"
0046 msgid "Unknown identifier: '%1'"
0047 msgstr "Ismeretlen azonosító: „%1”"
0048
0049 #: analitza/analyzer.cpp:257 analitza/analyzer.cpp:290
0050 msgctxt "identifier separator in error message|"
0051 msgid "', '"
0052 msgstr "', '"
0053
0054 #: analitza/analyzer.cpp:615
0055 msgctxt "Error message, no proper condition found.|"
0056 msgid "Could not find a proper choice for a condition statement."
0057 msgstr "Nem sikerült megfelelő választást találni egy feltételes kifejezéshez."
0058
0059 #: analitza/analyzer.cpp:936
0060 msgctxt "QCoreApplication|"
0061 msgid "Type not supported for bounding."
0062 msgstr "A típus korlátozása nem támogatott."
0063
0064 #: analitza/analyzer.cpp:961
0065 msgctxt "QCoreApplication|"
0066 msgid "The downlimit is greater than the uplimit"
0067 msgstr "Az alsó korlát nagyobb, mint a felső korlát"
0068
0069 #: analitza/analyzer.cpp:963
0070 msgctxt "QCoreApplication|"
0071 msgid "Incorrect uplimit or downlimit."
0072 msgstr "Helytelen felső vagy alsó korlát."
0073
0074 #: analitza/analyzer.cpp:1055 analitza/analyzer.cpp:1080
0075 #, qt-format
0076 msgctxt "QCoreApplication|"
0077 msgid "Invalid type for parameter '%1'"
0078 msgstr "Érvénytelen típus a(z) „%1” paraméterhez"
0079
0080 #: analitza/analyzer.cpp:1877
0081 msgctxt "By a cycle i mean a variable that depends on itself|"
0082 msgid "Defined a variable cycle"
0083 msgstr "Ciklikus változó definiálva"
0084
0085 #: analitza/analyzer.cpp:1919
0086 msgctxt "QCoreApplication|"
0087 msgid "The result is not a number"
0088 msgstr "Az eredmény nem szám"
0089
0090 #: analitza/commands/blockmatrixcommands.cpp:44
0091 #: analitza/commands/blockmatrixcommands.cpp:234
0092 #: analitza/commands/listcommands.cpp:47 analitza/commands/listcommands.cpp:64
0093 #: analitza/commands/matrixcommands.cpp:48
0094 #: analitza/commands/matrixcommands.cpp:201
0095 #: analitza/commands/vectorcommands.cpp:45
0096 #: analitza/commands/vectorcommands.cpp:82
0097 #, qt-format
0098 msgctxt "QCoreApplication|"
0099 msgid "Invalid parameter count for '%1'"
0100 msgstr "Érvénytelen paraméterszám ehhez: „%1”"
0101
0102 #: analitza/commands/blockmatrixcommands.cpp:86
0103 #: analitza/commands/blockmatrixcommands.cpp:119
0104 #: analitza/commands/blockmatrixcommands.cpp:122
0105 msgctxt "QCoreApplication|"
0106 msgid "Blocks must have consistent size between each and other"
0107 msgstr "A blokkok méretének konzisztensnek kell lennie egymás között."
0108
0109 #: analitza/commands/blockmatrixcommands.cpp:90
0110 #: analitza/commands/blockmatrixcommands.cpp:126
0111 #: analitza/commands/blockmatrixcommands.cpp:263
0112 msgctxt "QCoreApplication|"
0113 msgid "Do not want empty blocks"
0114 msgstr "Nem lehetnek üres blokkok"
0115
0116 #: analitza/commands/blockmatrixcommands.cpp:93
0117 #: analitza/commands/blockmatrixcommands.cpp:130
0118 #: analitza/commands/blockmatrixcommands.cpp:209
0119 #: analitza/commands/blockmatrixcommands.cpp:267
0120 msgctxt "QCoreApplication|"
0121 msgid "Blocks must be matrices"
0122 msgstr "A blokkoknak mátrixoknak kell lenniük"
0123
0124 #: analitza/commands/blockmatrixcommands.cpp:142
0125 msgctxt "QCoreApplication|"
0126 msgid "Number of blocks must be consistent"
0127 msgstr "A blokkok számának konzisztensnek kell lennie"
0128
0129 #: analitza/commands/blockmatrixcommands.cpp:145
0130 #: analitza/commands/blockmatrixcommands.cpp:211
0131 #: analitza/commands/matrixcommands.cpp:147
0132 msgctxt "QCoreApplication|"
0133 msgid "Do not want empty vectors/matrixrow elements"
0134 msgstr "Nem lehetnek üres vektorok/mátrixsor elemek"
0135
0136 #: analitza/commands/blockmatrixcommands.cpp:150
0137 #: analitza/commands/blockmatrixcommands.cpp:213
0138 #: analitza/commands/matrixcommands.cpp:149
0139 msgctxt "QCoreApplication|"
0140 msgid "Matrix constructor needs vectors or matrixrow elements"
0141 msgstr "A mátrixkonstruktornak vektorokra vagy mátrixsor elemekre van szüksége"
0142
0143 #: analitza/commands/blockmatrixcommands.cpp:244
0144 #: analitza/commands/matrixcommands.cpp:288
0145 #, qt-format
0146 msgctxt "QCoreApplication|"
0147 msgid "the arg %1 is invalid or is error"
0148 msgstr "az arg %1 érvénytelen vagy hibás"
0149
0150 #: analitza/commands/eigencommands.cpp:39
0151 #, qt-format
0152 msgctxt "QCoreApplication|"
0153 msgid "Invalid parameter count for '%1'. Should have 1 parameter"
0154 msgstr "Érvénytelen paraméterszám ehhez: „%1”. 1 paraméter szükséges"
0155
0156 #: analitza/commands/eigencommands.cpp:47
0157 #, qt-format
0158 msgctxt "QCoreApplication|"
0159 msgid "To use '%1' command the input matrix must be square"
0160 msgstr ""
0161 "A(z) „%1” parancs használatához a bemeneti mátrixnak négyzetesnek kell lennie"
0162
0163 #: analitza/commands/eigencommands.cpp:68
0164 #: analitza/commands/eigencommands.cpp:74
0165 #, qt-format
0166 msgctxt "QCoreApplication|"
0167 msgid ""
0168 "Invalid parameter type in matrix entry (%1,%2) for '%3', it must be a number "
0169 "value"
0170 msgstr ""
0171 "Érvénytelen paramétertípus a (%1,%2) mátrixelemben ehhez: „%3”, számértéknek "
0172 "kell lennie"
0173
0174 #: analitza/commands/eigencommands.cpp:126
0175 #: analitza/commands/eigencommands.cpp:193
0176 msgctxt "QCoreApplication|NaN means Not a Number, is an invalid float number"
0177 msgid "Returned eigenvalue is NaN"
0178 msgstr "A visszaadott sajátérték NaN"
0179
0180 #: analitza/commands/eigencommands.cpp:132
0181 #: analitza/commands/eigencommands.cpp:196
0182 msgctxt "QCoreApplication|"
0183 msgid "Returned eigenvalue is too big"
0184 msgstr "A visszaadott sajátérték túl nagy"
0185
0186 #: analitza/commands/matrixcommands.cpp:31
0187 msgctxt "QCoreApplication|"
0188 msgid "Matrix dimensions must be greater than zero"
0189 msgstr "A mátrix dimenzióinak nullánál nagyobbaknak kell lenniük"
0190
0191 #: analitza/commands/matrixcommands.cpp:122 analitza/expression.cpp:296
0192 msgctxt "QCoreApplication|"
0193 msgid "All matrixrow elements must have the same size"
0194 msgstr "Minden mátrixsor elemnek egyforma méretűnek kell lennie"
0195
0196 #: analitza/commands/matrixcommands.cpp:127
0197 msgctxt "QCoreApplication|"
0198 msgid "Not all are rows or vectors"
0199 msgstr "Nem mindegyik sor vagy vektor"
0200
0201 #: analitza/commands/matrixcommands.cpp:143
0202 msgctxt "QCoreApplication|"
0203 msgid "Every argument must be a matrixrow element"
0204 msgstr "Minden argumentumnak mátrixsor elemnek kell lennie"
0205
0206 #: analitza/commands/matrixcommands.cpp:241
0207 msgctxt "QCoreApplication|"
0208 msgid "The nth diagonal index must be less than the row count"
0209 msgstr "Az n-edik diagonális indexnek kisebbnek kell lennie, mint a sorszám"
0210
0211 #: analitza/commands/matrixcommands.cpp:249
0212 msgctxt "QCoreApplication|"
0213 msgid "The nth diagonal index must be less than the column count"
0214 msgstr ""
0215 "Az n-edik diagonális indexnek kisebbnek kell lennie, mint az oszlopszám"
0216
0217 #: analitza/commands/matrixcommands.cpp:265
0218 msgctxt "QCoreApplication|"
0219 msgid "nth diagonal index must be integer number"
0220 msgstr "Az n-edik diagonális indexnek egész számnak kell lennie"
0221
0222 #: analitza/commands/matrixcommands.cpp:269
0223 msgctxt "QCoreApplication|"
0224 msgid "nth diagonal index must be a positive integer number"
0225 msgstr "Az n-edik diagonális indexnek pozitív egész számnak kell lennie"
0226
0227 #: analitza/commands/vectorcommands.cpp:62
0228 #, qt-format
0229 msgctxt "QCoreApplication|"
0230 msgid "Invalid parameter type for '%1', was expected a list"
0231 msgstr "A(z) „%1” paramétertípusa érvénytelen, listát várt"
0232
0233 #: analitza/commands/vectorcommands.cpp:75
0234 #: analitza/commands/vectorcommands.cpp:78
0235 msgctxt "QCoreApplication|"
0236 msgid "Vector size must be some integer value greater to zero"
0237 msgstr "A vektorméretnek nullánál nagyobb egész számnak kell lennie"
0238
0239 #: analitza/explexer.cpp:78
0240 msgctxt "QCoreApplication|"
0241 msgid "Unexpectedly arrived to the end of the input"
0242 msgstr "A bemenet vége váratlanul elérve"
0243
0244 #: analitza/explexer.cpp:112
0245 #, qt-format
0246 msgctxt "QCoreApplication|"
0247 msgid "Unknown token %1"
0248 msgstr "Ismeretlen token: %1"
0249
0250 #: analitza/expression.cpp:162
0251 #, qt-format
0252 msgctxt "QCoreApplication|"
0253 msgid "<em>%1</em> needs at least 2 parameters"
0254 msgstr "<em>%1</em> legalább két paramétert igényel"
0255
0256 #: analitza/expression.cpp:164
0257 #, qt-format
0258 msgctxt "QCoreApplication|"
0259 msgid "<em>%1</em> requires %2 parameters"
0260 msgstr "<em>%1</em> %2 paramétert igényel"
0261
0262 #: analitza/expression.cpp:171
0263 #, qt-format
0264 msgctxt "QCoreApplication|"
0265 msgid "Missing boundary for '%1'"
0266 msgstr "Hiányzó korlátok: „%1”"
0267
0268 #: analitza/expression.cpp:173
0269 #, qt-format
0270 msgctxt "QCoreApplication|"
0271 msgid "Unexpected bounding for '%1'"
0272 msgstr "Váratlan korlátok: „%1”"
0273
0274 #: analitza/expression.cpp:178
0275 #, qt-format
0276 msgctxt "QCoreApplication|"
0277 msgid "<em>%1</em> missing bounds on '%2'"
0278 msgstr "<em>%1</em> korlátai hiányoznak itt: „%2”"
0279
0280 #: analitza/expression.cpp:200
0281 msgctxt "QCoreApplication|"
0282 msgid "Wrong declare"
0283 msgstr "Hibás deklaráció"
0284
0285 #: analitza/expression.cpp:210
0286 #, qt-format
0287 msgctxt "QCoreApplication|"
0288 msgid "Empty container: %1"
0289 msgstr "Üres konténer: %1"
0290
0291 #: analitza/expression.cpp:228
0292 msgctxt "there was a conditional outside a condition structure|"
0293 msgid "We can only have conditionals inside piecewise structures."
0294 msgstr "Csak blokkokon belül lehetnek feltételek."
0295
0296 #: analitza/expression.cpp:244
0297 #, qt-format
0298 msgctxt "QCoreApplication|"
0299 msgid "Cannot have two parameters with the same name like '%1'."
0300 msgstr "Nem lehet két azonos nevű paraméter mint „%1”."
0301
0302 #: analitza/expression.cpp:259
0303 msgctxt ""
0304 "this is an error message. otherwise is the else in a mathml condition|"
0305 msgid "The <em>otherwise</em> parameter should be the last one"
0306 msgstr "Az <em>else</em> paraméter értéke legalább 1 kell legyen"
0307
0308 #: analitza/expression.cpp:267
0309 #, qt-format
0310 msgctxt "there was an element that was not a conditional inside a condition|"
0311 msgid "%1 is not a proper condition inside the piecewise"
0312 msgstr "%1 nem megfelelő feltétel a blokkon belül"
0313
0314 #: analitza/expression.cpp:273
0315 msgctxt "QCoreApplication|"
0316 msgid "We can only declare variables"
0317 msgstr "Csak változókat lehet deklarálni"
0318
0319 #: analitza/expression.cpp:279
0320 msgctxt "QCoreApplication|"
0321 msgid "We can only have bounded variables"
0322 msgstr "Csak korlátos változók lehetnek"
0323
0324 #: analitza/expression.cpp:290 analitza/expression.cpp:495
0325 msgctxt "QCoreApplication|"
0326 msgid "Do not want empty matrixrow elements"
0327 msgstr "Nem lehetnek üres mátrixsor elemek"
0328
0329 #: analitza/expression.cpp:300
0330 msgctxt "QCoreApplication|"
0331 msgid "The matrix must contain only matrixrow elements"
0332 msgstr "A mátrix csak mátrixsor elemeket tartalmazhat"
0333
0334 #: analitza/expression.cpp:419
0335 #, qt-format
0336 msgctxt "QCoreApplication|"
0337 msgid "Error while parsing: %1"
0338 msgstr "Hiba feldolgozás közben: %1"
0339
0340 #: analitza/expression.cpp:450
0341 #, qt-format
0342 msgctxt "An error message|"
0343 msgid "Container unknown: %1"
0344 msgstr "Ismeretlen konténer: %1"
0345
0346 #: analitza/expression.cpp:456
0347 #, qt-format
0348 msgctxt "QCoreApplication|"
0349 msgid "Cannot codify the %1 value."
0350 msgstr "A(z) %1 értéke nem kódolható."
0351
0352 #: analitza/expression.cpp:462
0353 #, qt-format
0354 msgctxt "QCoreApplication|"
0355 msgid "The %1 operator cannot have child contexts."
0356 msgstr "A(z) %1 operátornak nem lehetnek gyermekkörnyezetei."
0357
0358 #: analitza/expression.cpp:466
0359 #, qt-format
0360 msgctxt "QCoreApplication|"
0361 msgid "The element '%1' is not an operator."
0362 msgstr "A(z) „%1” elem nem operátor."
0363
0364 #: analitza/expression.cpp:479
0365 msgctxt "QCoreApplication|"
0366 msgid "Do not want empty vectors"
0367 msgstr "Nem lehetnek üres vektorok"
0368
0369 #: analitza/expression.cpp:489
0370 msgctxt "QCoreApplication|"
0371 msgid "Do not want empty matrices"
0372 msgstr "Nem lehetnek üres mátrixok"
0373
0374 #: analitza/expression.cpp:508
0375 #, qt-format
0376 msgctxt "Error message due to an unrecognized input|"
0377 msgid "Not supported/unknown: %1"
0378 msgstr "Nem támogatott/ismeretlen: %1"
0379
0380 #: analitza/expressionparser.cpp:296
0381 msgctxt "QCoreApplication|"
0382 msgid ", "
0383 msgstr ", "
0384
0385 #: analitza/expressionparser.cpp:296
0386 #, qt-format
0387 msgctxt "error message|"
0388 msgid "Expected %1 instead of '%2'"
0389 msgstr "„%2” helyett %1 várt"
0390
0391 #: analitza/expressionparser.cpp:298
0392 msgctxt "QCoreApplication|"
0393 msgid "Missing right parenthesis"
0394 msgstr "Hiányzó jobb oldali zárójel"
0395
0396 #: analitza/expressionparser.cpp:300
0397 msgctxt "QCoreApplication|"
0398 msgid "Unbalanced right parenthesis"
0399 msgstr "Kiegyensúlyozatlan jobb oldali zárójel"
0400
0401 #: analitza/expressionparser.cpp:303
0402 #, qt-format
0403 msgctxt "QCoreApplication|"
0404 msgid "Unexpected token identifier: %1"
0405 msgstr "Váratlan tokenazonosító: %1"
0406
0407 #: analitza/expressionparser.cpp:305
0408 #, qt-format
0409 msgctxt "QCoreApplication|"
0410 msgid "Unexpected token %1"
0411 msgstr "Váratlan token: %1"
0412
0413 #: analitza/expressiontypechecker.cpp:301
0414 #, qt-format
0415 msgctxt "QCoreApplication|"
0416 msgid "Could not find a type that unifies '%1'"
0417 msgstr "Nem található típus „%1” egyesítésére"
0418
0419 #: analitza/expressiontypechecker.cpp:473
0420 msgctxt "QCoreApplication|"
0421 msgid "The domain should be either a vector or a list"
0422 msgstr "A tartománynak vektornak vagy listának kell lennie"
0423
0424 #: analitza/expressiontypechecker.cpp:558
0425 #, qt-format
0426 msgctxt "type error message|"
0427 msgid "Cannot call '%1'"
0428 msgstr "„%1” nem hívható"
0429
0430 #: analitza/expressiontypechecker.cpp:593
0431 #, qt-format
0432 msgctxt "QCoreApplication|"
0433 msgid "Cannot reduce '%1' to '%2'. Invalid type of parameter '%3' for '%4'"
0434 msgstr ""
0435 "„%1” nem redukálható erre: „%2”. „%3” érvénytelen paramétertípus ehhez: „%4”"
0436
0437 #: analitza/expressiontypechecker.cpp:604
0438 #, qt-format
0439 msgctxt "QCoreApplication|"
0440 msgid "Invalid parameter count for '%2'. Should have %1 parameters."
0441 msgstr "Érvénytelen paraméterszám ehhez: „%2”. %1 paraméter szükséges."
0442
0443 #: analitza/expressiontypechecker.cpp:616
0444 #, qt-format
0445 msgctxt "QCoreApplication|"
0446 msgid "Cannot compare '%1' to '%2'. Invalid type of parameter '%3' for '%4'"
0447 msgstr ""
0448 "„%1” és „%2” nem hasonlítható össze. „%3” érvénytelen paramétertípus ehhez: "
0449 "„%4”"
0450
0451 #: analitza/expressiontypechecker.cpp:654
0452 #, qt-format
0453 msgctxt "QCoreApplication|"
0454 msgid "Could not call '%1'"
0455 msgstr "„%1” nem hívható"
0456
0457 #: analitza/expressiontypechecker.cpp:662
0458 #, qt-format
0459 msgctxt "QCoreApplication|"
0460 msgid "Could not solve '%1'"
0461 msgstr "„%1” nem oldható meg"
0462
0463 #: analitza/expressiontypechecker.cpp:695
0464 #, qt-format
0465 msgctxt "QCoreApplication|"
0466 msgid "Incoherent type for the variable '%1'"
0467 msgstr "Inkoherens típus a(z) „%1” változóhoz"
0468
0469 #: analitza/expressiontypechecker.cpp:718
0470 msgctxt "QCoreApplication|"
0471 msgid "Could not determine the type for piecewise"
0472 msgstr "Nem sikerült meghatározni a blokk típusát"
0473
0474 #: analitza/expressiontypechecker.cpp:937
0475 msgctxt "QCoreApplication|"
0476 msgid "Unexpected type"
0477 msgstr "Váratlan típus"
0478
0479 #: analitza/expressiontypechecker.cpp:960
0480 #, qt-format
0481 msgctxt "QCoreApplication|"
0482 msgid "Cannot convert '%1' to '%2'"
0483 msgstr "„%1” nem konvertálható erre: „%2”"
0484
0485 #: analitza/htmlexpressionwriter.cpp:54 analitza/htmlexpressionwriter.cpp:55
0486 #, qt-format
0487 msgctxt "html representation of an operator|"
0488 msgid "<span class='op'>%1</span>"
0489 msgstr "<span class='op'>%1</span>"
0490
0491 #: analitza/htmlexpressionwriter.cpp:56
0492 #, qt-format
0493 msgctxt "html representation of an operator|"
0494 msgid "<span class='keyword'>%1</span>"
0495 msgstr "<span class='keyword'>%1</span>"
0496
0497 #: analitza/mathmlpresentationlexer.cpp:94
0498 #, qt-format
0499 msgctxt "Error message|"
0500 msgid "Unknown token '%1'"
0501 msgstr "Ismeretlen token: „%1”"
0502
0503 #: analitza/operations.cpp:54 analitza/operations.cpp:191
0504 msgctxt "QCoreApplication|"
0505 msgid "Cannot divide by 0."
0506 msgstr "Nem lehet 0-val osztani."
0507
0508 #: analitza/operations.cpp:72 analitza/operations.cpp:203
0509 msgctxt "QCoreApplication|"
0510 msgid "Cannot calculate the remainder on 0."
0511 msgstr "Nem lehet kiszámolni a maradékot 0 esetén."
0512
0513 #: analitza/operations.cpp:84 analitza/operations.cpp:213
0514 msgctxt "QCoreApplication|"
0515 msgid "Cannot calculate the factor on 0."
0516 msgstr "Nem lehet kiszámolni a tényezőt 0 esetén."
0517
0518 #: analitza/operations.cpp:140 analitza/operations.cpp:261
0519 msgctxt "QCoreApplication|"
0520 msgid "Cannot calculate the lcm of 0."
0521 msgstr "Nem lehet kiszámolni a 0 legkisebb közös többszörösét."
0522
0523 #: analitza/operations.cpp:246
0524 msgctxt "QCoreApplication|"
0525 msgid "Boolean operations on complex numbers not available"
0526 msgstr "A komplex számokon végzett logikai műveletek nem érhetők el"
0527
0528 #: analitza/operations.cpp:276
0529 msgctxt "QCoreApplication|"
0530 msgid "Only square root implemented for complex numbers"
0531 msgstr "A komplex számokra csak a négyzetgyök lett implementálva"
0532
0533 #: analitza/operations.cpp:351 analitza/operations.cpp:463
0534 #, qt-format
0535 msgctxt "QCoreApplication|"
0536 msgid "Could not calculate a value %1"
0537 msgstr "Nem lehet kiszámolni %1 értékét"
0538
0539 #: analitza/operations.cpp:479
0540 #, qt-format
0541 msgctxt "QCoreApplication|"
0542 msgid "Cannot calculate %1 between a value and an error type"
0543 msgstr "A(z) %1 nem számolható ki egy érték és egy hibatípus között"
0544
0545 #: analitza/operations.cpp:495 analitza/operations.cpp:652
0546 #: analitza/operations.cpp:784
0547 msgctxt "QCoreApplication|"
0548 msgid "Invalid index for a container"
0549 msgstr "Érvénytelen konténerindex"
0550
0551 #: analitza/operations.cpp:527
0552 #, qt-format
0553 msgctxt "QCoreApplication|"
0554 msgid "Cannot operate '%1' on different sized vectors."
0555 msgstr "„%1” nem hajtható végre eltérő méretű vektorokon."
0556
0557 #: analitza/operations.cpp:566
0558 msgctxt "QCoreApplication|"
0559 msgid ""
0560 "Multiplication between a matrix and a vector is allowed provided that the "
0561 "number of columns of the matrix equals the size of the vector"
0562 msgstr ""
0563 "Mátrix és vektor közötti szorzás megengedett, feltéve, hogy a a mátrix "
0564 "oszlopainak száma megegyezik a vektor méretével."
0565
0566 #: analitza/operations.cpp:570 analitza/operations.cpp:707
0567 msgctxt "QCoreApplication|"
0568 msgid "Matrix and vector entries must be numbers"
0569 msgstr "A mátrix- és vektorelemeknek számoknak kell lenniük"
0570
0571 #: analitza/operations.cpp:599
0572 #, qt-format
0573 msgctxt "QCoreApplication|"
0574 msgid "Could not calculate a vector's %1"
0575 msgstr "Nem lehet kiszámolni egy vektorhoz a következőt: %1"
0576
0577 #: analitza/operations.cpp:621 analitza/operations.cpp:637
0578 #, qt-format
0579 msgctxt "QCoreApplication|"
0580 msgid "Could not calculate a list's %1"
0581 msgstr "Nem lehet kiszámolni egy listához a következőt: %1"
0582
0583 #: analitza/operations.cpp:703
0584 msgctxt "QCoreApplication|"
0585 msgid ""
0586 "Multiplication between a vector and a matrix is allowed provided that the "
0587 "matrix has only one matrixrow element"
0588 msgstr ""
0589 "Egy vektor és egy mátrix közötti szorzás megengedett, feltéve, hogy a "
0590 "mátrixnak csak egy mátrixsor eleme van"
0591
0592 #: analitza/operations.cpp:730
0593 msgctxt "QCoreApplication|"
0594 msgid ""
0595 "Addition of two matrices is allowed provided that both matrices have the "
0596 "same number of rows and the same number of columns"
0597 msgstr ""
0598 "Két mátrix összeadása megengedett, feltéve, hogy mindkét mátrixnak "
0599 "ugyanannyi sora és ugyanannyi oszlopa van"
0600
0601 #: analitza/operations.cpp:762
0602 msgctxt "QCoreApplication|"
0603 msgid ""
0604 "Multiplication of two matrices is allowed provided that the number of "
0605 "columns of the first matrix equals the number of rows of the second matrix"
0606 msgstr ""
0607 "Két mátrix szorzása megengedett, feltéve, hogy az első mátrixok oszlopainak "
0608 "száma megegyezik a második mátrix sorainak számával."
0609
0610 #: analitza/operations.cpp:766 analitza/operations.cpp:804
0611 #: analitza/operations.cpp:887
0612 msgctxt "QCoreApplication|"
0613 msgid "Matrix entries must be numbers"
0614 msgstr "A mátrix elemeinek számoknak kell lenniük"
0615
0616 #: analitza/operations.cpp:879
0617 msgctxt "QCoreApplication|"
0618 msgid "The exponent of 'power' must be some integer number"
0619 msgstr "A „hatvány” kitevőjének egész számnak kell lennie"
0620
0621 #: analitza/operations.cpp:883
0622 msgctxt "QCoreApplication|"
0623 msgid "Cannot compute 'power' for non square matrix"
0624 msgstr "Nem lehet kiszámolni nem négyzetes mátrixok hatványát"
0625
0626 #: analitza/operations.cpp:922
0627 #, qt-format
0628 msgctxt "QCoreApplication|"
0629 msgid "Cannot calculate %1 between a matrix and an error type"
0630 msgstr "A(z) %1 nem számolható ki egy mátrix és egy hibatípus között"
0631
0632 #: analitza/providederivative.cpp:93
0633 #, qt-format
0634 msgctxt "QCoreApplication|"
0635 msgid "Could not calculate the derivative for '%1'"
0636 msgstr "Nem sikerült kiszámítani a(z) „%1” deriváltját"
0637
0638 #: analitzagui/operatorsmodel.cpp:95 analitzagui/variablesmodel.cpp:91
0639 #: analitzaplot/plotsdictionarymodel.cpp:36 analitzaplot/plotsmodel.cpp:78
0640 msgctxt "@title:column|"
0641 msgid "Name"
0642 msgstr "Név"
0643
0644 #: analitzagui/operatorsmodel.cpp:98
0645 msgctxt "@title:column|"
0646 msgid "Description"
0647 msgstr "Leírás"
0648
0649 #: analitzagui/operatorsmodel.cpp:101
0650 msgctxt "@title:column|"
0651 msgid "Parameters"
0652 msgstr "Paraméterek"
0653
0654 #: analitzagui/operatorsmodel.cpp:104
0655 msgctxt "@title:column|"
0656 msgid "Example"
0657 msgstr "Példa"
0658
0659 #: analitzagui/operatorsmodel.cpp:135
0660 msgctxt "Syntax for function bounding|"
0661 msgid " : var"
0662 msgstr " : var"
0663
0664 #: analitzagui/operatorsmodel.cpp:137
0665 msgctxt "Syntax for function bounding values|"
0666 msgid "=from..to"
0667 msgstr "=tól..ig"
0668
0669 #: analitzagui/operatorsmodel.cpp:140
0670 #, qt-format
0671 msgctxt "QCoreApplication|"
0672 msgid "%1("
0673 msgstr "%1("
0674
0675 #: analitzagui/operatorsmodel.cpp:143
0676 #, qt-format
0677 msgctxt "QCoreApplication|"
0678 msgid "%1... parameters, ...%2)"
0679 msgstr "%1... paraméterek, ...%2)"
0680
0681 #: analitzagui/operatorsmodel.cpp:146
0682 #, qt-format
0683 msgctxt "QCoreApplication|"
0684 msgid "par%1"
0685 msgstr "par%1"
0686
0687 #: analitzagui/operatorsmodel.cpp:159
0688 msgctxt "QCoreApplication|"
0689 msgid "Addition"
0690 msgstr "Összeadás"
0691
0692 #: analitzagui/operatorsmodel.cpp:162
0693 msgctxt "QCoreApplication|"
0694 msgid "Multiplication"
0695 msgstr "Szorzás"
0696
0697 #: analitzagui/operatorsmodel.cpp:165
0698 msgctxt "QCoreApplication|"
0699 msgid "Division"
0700 msgstr "Osztás"
0701
0702 #: analitzagui/operatorsmodel.cpp:168
0703 msgctxt "QCoreApplication|"
0704 msgid "Subtraction. Will remove all values from the first one."
0705 msgstr "Kivonás. Eltávolítja az összes értéket az elsőtől."
0706
0707 #: analitzagui/operatorsmodel.cpp:171
0708 msgctxt "QCoreApplication|"
0709 msgid "Power"
0710 msgstr "Kitevő"
0711
0712 #: analitzagui/operatorsmodel.cpp:174
0713 msgctxt "QCoreApplication|"
0714 msgid "Remainder"
0715 msgstr "Maradék"
0716
0717 #: analitzagui/operatorsmodel.cpp:177
0718 msgctxt "QCoreApplication|"
0719 msgid "Quotient"
0720 msgstr "Hányados"
0721
0722 #: analitzagui/operatorsmodel.cpp:180
0723 msgctxt "QCoreApplication|"
0724 msgid "The factor of"
0725 msgstr "A következő faktoriálisa"
0726
0727 #: analitzagui/operatorsmodel.cpp:183
0728 msgctxt "QCoreApplication|"
0729 msgid "Factorial. factorial(n)=n!"
0730 msgstr "Faktoriális. factorial(n)=n!"
0731
0732 #: analitzagui/operatorsmodel.cpp:186
0733 msgctxt "QCoreApplication|"
0734 msgid "Function to calculate the sine of a given angle"
0735 msgstr "A megadott szög szinuszát kiszámító függvény"
0736
0737 #: analitzagui/operatorsmodel.cpp:189
0738 msgctxt "QCoreApplication|"
0739 msgid "Function to calculate the cosine of a given angle"
0740 msgstr "A megadott szög koszinuszát kiszámító függvény"
0741
0742 #: analitzagui/operatorsmodel.cpp:192
0743 msgctxt "QCoreApplication|"
0744 msgid "Function to calculate the tangent of a given angle"
0745 msgstr "A megadott szög tangensét kiszámító függvény"
0746
0747 #: analitzagui/operatorsmodel.cpp:195
0748 msgctxt "QCoreApplication|"
0749 msgid "Secant"
0750 msgstr "Szekáns"
0751
0752 #: analitzagui/operatorsmodel.cpp:198
0753 msgctxt "QCoreApplication|"
0754 msgid "Cosecant"
0755 msgstr "Koszekáns"
0756
0757 #: analitzagui/operatorsmodel.cpp:201
0758 msgctxt "QCoreApplication|"
0759 msgid "Cotangent"
0760 msgstr "Kotangens"
0761
0762 #: analitzagui/operatorsmodel.cpp:204
0763 msgctxt "QCoreApplication|"
0764 msgid "Hyperbolic sine"
0765 msgstr "Hiperbolikus koszinusz"
0766
0767 #: analitzagui/operatorsmodel.cpp:207
0768 msgctxt "QCoreApplication|"
0769 msgid "Hyperbolic cosine"
0770 msgstr "Hiperbolikus koszinusz"
0771
0772 #: analitzagui/operatorsmodel.cpp:210
0773 msgctxt "QCoreApplication|"
0774 msgid "Hyperbolic tangent"
0775 msgstr "Hiperbolikus tangens"
0776
0777 #: analitzagui/operatorsmodel.cpp:213
0778 msgctxt "QCoreApplication|"
0779 msgid "Hyperbolic secant"
0780 msgstr "Hiperbolikus szekáns"
0781
0782 #: analitzagui/operatorsmodel.cpp:216
0783 msgctxt "QCoreApplication|"
0784 msgid "Hyperbolic cosecant"
0785 msgstr "Hiperbolikus koszekáns"
0786
0787 #: analitzagui/operatorsmodel.cpp:219
0788 msgctxt "QCoreApplication|"
0789 msgid "Hyperbolic cotangent"
0790 msgstr "Hiperbolikus kotangens"
0791
0792 #: analitzagui/operatorsmodel.cpp:222
0793 msgctxt "QCoreApplication|"
0794 msgid "Arc sine"
0795 msgstr "Arkusz szinusz"
0796
0797 #: analitzagui/operatorsmodel.cpp:225
0798 msgctxt "QCoreApplication|"
0799 msgid "Arc cosine"
0800 msgstr "Arkusz koszinusz"
0801
0802 #: analitzagui/operatorsmodel.cpp:228
0803 msgctxt "QCoreApplication|"
0804 msgid "Arc tangent"
0805 msgstr "Arkusz tangens"
0806
0807 #: analitzagui/operatorsmodel.cpp:231
0808 msgctxt "QCoreApplication|"
0809 msgid "Arc cotangent"
0810 msgstr "Arkusz kotangens"
0811
0812 #: analitzagui/operatorsmodel.cpp:237
0813 msgctxt "QCoreApplication|"
0814 msgid "Hyperbolic arc tangent"
0815 msgstr "Hiperbolikus arkusz tangens"
0816
0817 #: analitzagui/operatorsmodel.cpp:240
0818 msgctxt "QCoreApplication|"
0819 msgid "Summatory"
0820 msgstr "Összegzés"
0821
0822 #: analitzagui/operatorsmodel.cpp:243
0823 msgctxt "QCoreApplication|"
0824 msgid "Productory"
0825 msgstr "Produktum"
0826
0827 #: analitzagui/operatorsmodel.cpp:246
0828 msgctxt "QCoreApplication|"
0829 msgid "For all"
0830 msgstr "Minden"
0831
0832 #: analitzagui/operatorsmodel.cpp:249
0833 msgctxt "QCoreApplication|"
0834 msgid "Exists"
0835 msgstr "Létezik"
0836
0837 #: analitzagui/operatorsmodel.cpp:252
0838 msgctxt "QCoreApplication|"
0839 msgid "Differentiation"
0840 msgstr "Deriválás"
0841
0842 #: analitzagui/operatorsmodel.cpp:255
0843 msgctxt "QCoreApplication|"
0844 msgid "Hyperbolic arc sine"
0845 msgstr "Hiperbolikus arkusz szinusz"
0846
0847 #: analitzagui/operatorsmodel.cpp:258
0848 msgctxt "QCoreApplication|"
0849 msgid "Hyperbolic arc cosine"
0850 msgstr "Hiperbolikus arkusz koszinusz"
0851
0852 #: analitzagui/operatorsmodel.cpp:261
0853 msgctxt "QCoreApplication|"
0854 msgid "Arc cosecant"
0855 msgstr "Arkusz koszekáns"
0856
0857 #: analitzagui/operatorsmodel.cpp:264
0858 msgctxt "QCoreApplication|"
0859 msgid "Hyperbolic arc cosecant"
0860 msgstr "Hiperbolikus arkusz koszekáns"
0861
0862 #: analitzagui/operatorsmodel.cpp:267
0863 msgctxt "QCoreApplication|"
0864 msgid "Arc secant"
0865 msgstr "Arkusz szekáns"
0866
0867 #: analitzagui/operatorsmodel.cpp:270
0868 msgctxt "QCoreApplication|"
0869 msgid "Hyperbolic arc secant"
0870 msgstr "Hiperbolikus arkusz szekáns"
0871
0872 #: analitzagui/operatorsmodel.cpp:273
0873 msgctxt "QCoreApplication|"
0874 msgid "Exponent (e^x)"
0875 msgstr "Exponens (e^x)"
0876
0877 #: analitzagui/operatorsmodel.cpp:276
0878 msgctxt "QCoreApplication|"
0879 msgid "Base-e logarithm"
0880 msgstr "e-alapú logaritmus"
0881
0882 #: analitzagui/operatorsmodel.cpp:279
0883 msgctxt "QCoreApplication|"
0884 msgid "Base-10 logarithm"
0885 msgstr "10-es alapú logaritmus"
0886
0887 #: analitzagui/operatorsmodel.cpp:282
0888 msgctxt "QCoreApplication|"
0889 msgid "Absolute value. abs(n)=|n|"
0890 msgstr "Abszolút érték. abs(n)=|n|"
0891
0892 #: analitzagui/operatorsmodel.cpp:285
0893 msgctxt "QCoreApplication|"
0894 msgid "Conjugate"
0895 msgstr "Konjugált"
0896
0897 #: analitzagui/operatorsmodel.cpp:288
0898 msgctxt "QCoreApplication|"
0899 msgid "Arg"
0900 msgstr "Arg"
0901
0902 #: analitzagui/operatorsmodel.cpp:291
0903 msgctxt "QCoreApplication|"
0904 msgid "Real"
0905 msgstr "Valós"
0906
0907 #: analitzagui/operatorsmodel.cpp:294
0908 msgctxt "QCoreApplication|"
0909 msgid "Imaginary"
0910 msgstr "Képzetes"
0911
0912 #: analitzagui/operatorsmodel.cpp:297
0913 msgctxt "QCoreApplication|"
0914 msgid "Floor value. floor(n)=⌊n⌋"
0915 msgstr "Alsó érték. floor(n)=⌊n⌋"
0916
0917 #: analitzagui/operatorsmodel.cpp:300
0918 msgctxt "QCoreApplication|"
0919 msgid "Ceil value. ceil(n)=⌈n⌉"
0920 msgstr "Felső érték. ceil(n)=⌈n⌉"
0921
0922 #: analitzagui/operatorsmodel.cpp:303
0923 msgctxt "QCoreApplication|"
0924 msgid "Minimum"
0925 msgstr "Minimum"
0926
0927 #: analitzagui/operatorsmodel.cpp:306
0928 msgctxt "QCoreApplication|"
0929 msgid "Maximum"
0930 msgstr "Maximum"
0931
0932 #: analitzagui/operatorsmodel.cpp:309
0933 msgctxt "QCoreApplication|"
0934 msgid "Greater than. gt(a,b)=a>b"
0935 msgstr "Nagyobb, mint. gt(a,b)=a>b"
0936
0937 #: analitzagui/operatorsmodel.cpp:312
0938 msgctxt "QCoreApplication|"
0939 msgid "Less than. lt(a,b)=a<b"
0940 msgstr "Kisebb, mint. lt(a,b)=a<b"
0941
0942 #: analitzagui/operatorsmodel.cpp:315
0943 msgctxt "QCoreApplication|"
0944 msgid "Equal. eq(a,b) = a=b"
0945 msgstr "Egyenlő. eq(a,b) = a=b"
0946
0947 #: analitzagui/operatorsmodel.cpp:318
0948 msgctxt "QCoreApplication|"
0949 msgid "Approximation. approx(a)=a±n"
0950 msgstr "Közelítés. approx(a)=a±n"
0951
0952 #: analitzagui/operatorsmodel.cpp:321
0953 msgctxt "QCoreApplication|"
0954 msgid "Not equal. neq(a,b)=a≠b"
0955 msgstr "Nem egyenlő. neq(a,b)=a≠b"
0956
0957 #: analitzagui/operatorsmodel.cpp:324
0958 msgctxt "QCoreApplication|"
0959 msgid "Greater or equal. geq(a,b)=a≥b"
0960 msgstr "Nagyobb vagy egyenlő. geq(a,b)=a≥b"
0961
0962 #: analitzagui/operatorsmodel.cpp:327
0963 msgctxt "QCoreApplication|"
0964 msgid "Less or equal. leq(a,b)=a≤b"
0965 msgstr "Kisebb vagy egyenlő. leq(a,b)=a≤b"
0966
0967 #: analitzagui/operatorsmodel.cpp:330
0968 msgctxt "QCoreApplication|"
0969 msgid "Boolean and"
0970 msgstr "Logikai és"
0971
0972 #: analitzagui/operatorsmodel.cpp:333
0973 msgctxt "QCoreApplication|"
0974 msgid "Boolean not"
0975 msgstr "Logikai nem"
0976
0977 #: analitzagui/operatorsmodel.cpp:336
0978 msgctxt "QCoreApplication|"
0979 msgid "Boolean or"
0980 msgstr "Logikai vagy"
0981
0982 #: analitzagui/operatorsmodel.cpp:339
0983 msgctxt "QCoreApplication|"
0984 msgid "Boolean xor"
0985 msgstr "Logikai kizáró vagy"
0986
0987 #: analitzagui/operatorsmodel.cpp:342
0988 msgctxt "QCoreApplication|"
0989 msgid "Boolean implication"
0990 msgstr "Logikai implikáció"
0991
0992 #: analitzagui/operatorsmodel.cpp:345
0993 msgctxt "QCoreApplication|"
0994 msgid "Greatest common divisor"
0995 msgstr "Legnagyobb közös osztó"
0996
0997 #: analitzagui/operatorsmodel.cpp:348
0998 msgctxt "QCoreApplication|"
0999 msgid "Least common multiple"
1000 msgstr "Legkisebb közös többszörös"
1001
1002 #: analitzagui/operatorsmodel.cpp:351
1003 msgctxt "QCoreApplication|"
1004 msgid "Root"
1005 msgstr "Gyök"
1006
1007 #: analitzagui/operatorsmodel.cpp:354
1008 msgctxt "QCoreApplication|"
1009 msgid "Cardinal"
1010 msgstr "Tőszám"
1011
1012 #: analitzagui/operatorsmodel.cpp:357
1013 msgctxt "QCoreApplication|"
1014 msgid "Scalar product"
1015 msgstr "Skaláris szorzat"
1016
1017 #: analitzagui/operatorsmodel.cpp:360
1018 msgctxt "QCoreApplication|"
1019 msgid "Select the par1-th element of par2 list or vector"
1020 msgstr "A par2 lista vagy vektor par1. elemének kiválasztása"
1021
1022 #: analitzagui/operatorsmodel.cpp:363
1023 msgctxt "QCoreApplication|"
1024 msgid "Joins several items of the same type"
1025 msgstr "Összekapcsol néhány azonos típusú elemet"
1026
1027 #: analitzagui/operatorsmodel.cpp:366
1028 msgctxt "QCoreApplication|"
1029 msgid "Applies a function to every element in a list"
1030 msgstr "Alkalmaz egy függvényt egy lista minden elemére"
1031
1032 #: analitzagui/operatorsmodel.cpp:369
1033 msgctxt "QCoreApplication|"
1034 msgid "Removes all elements that don't fit a condition"
1035 msgstr "Eltávolítja az összes elemet, ami nem felel meg egy feltételnek"
1036
1037 #: analitzagui/operatorsmodel.cpp:372
1038 msgctxt "QCoreApplication|"
1039 msgid "Transpose"
1040 msgstr "Transzponálás"
1041
1042 #: analitzagui/operatorsmodel.cpp:572
1043 #, qt-format
1044 msgctxt "n-ary function prototype|"
1045 msgid "<em>%1</em>(..., <b>par%2</b>, ...)"
1046 msgstr "<em>%1</em>(…, <b>PAR%2</b>, …)"
1047
1048 #: analitzagui/operatorsmodel.cpp:582
1049 #, qt-format
1050 msgctxt "Function name in function prototype|"
1051 msgid "<em>%1</em>("
1052 msgstr "<em>%1</em>("
1053
1054 #: analitzagui/operatorsmodel.cpp:583
1055 #, qt-format
1056 msgctxt "Uncorrect function name in function prototype|"
1057 msgid "<em style='color:red'><b>%1</b></em>("
1058 msgstr "<em style='color:red'><b>%1</b></em>("
1059
1060 #: analitzagui/operatorsmodel.cpp:586
1061 #, qt-format
1062 msgctxt "Parameter in function prototype|"
1063 msgid "par%1"
1064 msgstr "PAR%1"
1065
1066 #: analitzagui/operatorsmodel.cpp:589 analitzagui/operatorsmodel.cpp:599
1067 #, qt-format
1068 msgctxt "Current parameter in function prototype|"
1069 msgid "<b>%1</b>"
1070 msgstr "<b>%1</b>"
1071
1072 #: analitzagui/operatorsmodel.cpp:592
1073 msgctxt "Function parameter separator|"
1074 msgid ", "
1075 msgstr ", "
1076
1077 #: analitzagui/operatorsmodel.cpp:596
1078 msgctxt "Current parameter is the bounding|"
1079 msgid " : bounds"
1080 msgstr " : korlátok"
1081
1082 #: analitzagui/variablesmodel.cpp:94
1083 msgctxt "@title:column|"
1084 msgid "Value"
1085 msgstr "Érték"
1086
1087 #: analitzaplot/plotsfactory.cpp:49
1088 msgctxt "QCoreApplication|"
1089 msgid "The expression is not correct"
1090 msgstr "A kifejezés helytelen"
1091
1092 #: analitzaplot/plotsfactory.cpp:72
1093 #, qt-format
1094 msgctxt "QCoreApplication|"
1095 msgid "Function type '%1' not recognized"
1096 msgstr "A(z) „%1” függvénytípus nem ismerhető fel"
1097
1098 #: analitzaplot/plotsfactory.cpp:74
1099 #, qt-format
1100 msgctxt "QCoreApplication|"
1101 msgid "Function '%1' not recognized"
1102 msgstr "A(z) „%1” függvény nem ismerhető fel"
1103
1104 #: analitzaplot/plotsmodel.cpp:79
1105 msgctxt "@title:column|"
1106 msgid "Plot"
1107 msgstr "Kirajzolás"
1108
1109 #: analitzaplot/plotter3d_es.cpp:534 declarative/graph2dmobile.cpp:141
1110 msgctxt "QObject|"
1111 msgid "PNG Image (*.png)"
1112 msgstr "PNG kép (*.png)"
1113
1114 #: analitzaplot/plotter3d_es.cpp:534
1115 msgctxt "QObject|"
1116 msgid "PDF Document (*.pdf)"
1117 msgstr "PDF dokumentum (*.pdf)"
1118
1119 #: analitzaplot/plotter3d_es.cpp:534
1120 msgctxt "QObject|"
1121 msgid "X3D Document (*.x3d)"
1122 msgstr "X3D dokumentum (*.x3d)"
1123
1124 #: analitzaplot/plotter3d_es.cpp:534
1125 msgctxt "QObject|"
1126 msgid "STL Document (*.stl)"
1127 msgstr "STL dokumentum (*.stl)"
1128
1129 #: analitzaplot/private/backends/cartesiancurve.cpp:64
1130 msgctxt "Function type|"
1131 msgid "Plane Curve F(y)"
1132 msgstr "Síkgörbe F(y)"
1133
1134 #: analitzaplot/private/backends/cartesiancurve.cpp:80
1135 msgctxt "Function type|"
1136 msgid "Plane Curve F(x)"
1137 msgstr "Síkgörbe F(x)"
1138
1139 #: analitzaplot/private/backends/cartesiancurve.cpp:137
1140 #: analitzaplot/private/backends/cartesiancurve.cpp:245
1141 msgctxt "QCoreApplication|"
1142 msgid "We can only draw Real results."
1143 msgstr "Csak valós eredményeket tudunk kirajzolni."
1144
1145 #: analitzaplot/private/backends/cartesiancurve.cpp:248
1146 #: analitzawidgets/plotsview2d.cpp:236
1147 #, qt-format
1148 msgctxt "QCoreApplication|"
1149 msgid "x=%1 y=%2"
1150 msgstr "x = %1 y = %2"
1151
1152 #: analitzaplot/private/backends/cartesiansurface.cpp:52
1153 msgctxt "Function type|"
1154 msgid "Surface z=F(x,y)"
1155 msgstr "Felület z=F(x,y)"
1156
1157 #: analitzaplot/private/backends/cartesiansurface.cpp:94
1158 msgctxt "Function type|"
1159 msgid "Surface y=F(x,z)"
1160 msgstr "Felület y=F(x,z)"
1161
1162 #: analitzaplot/private/backends/cartesiansurface.cpp:127
1163 msgctxt "Function type|"
1164 msgid "Surface x=F(y,z)"
1165 msgstr "Felület x=F(y,z)"
1166
1167 #: analitzaplot/private/backends/cylindricalsurface.cpp:37
1168 msgctxt "Function type|"
1169 msgid "Cylindrical Surface z=F(r: Radial, p: Polar)"
1170 msgstr "Hengerfelület z=F(r: radiál, p: polár)"
1171
1172 #: analitzaplot/private/backends/implicitcurve.cpp:44
1173 msgctxt "Function type|"
1174 msgid "Implicit Curve"
1175 msgstr "Implicit görbe"
1176
1177 #: analitzaplot/private/backends/implicitpolarcurve.cpp:37
1178 msgctxt "Function type|"
1179 msgid "Polar implicit Curve 0=F(r: Radial, p: Polar)"
1180 msgstr "Poláris implicit görbe 0=Fr(r: radiál, p: polár)"
1181
1182 #: analitzaplot/private/backends/implicitsurface.cpp:35
1183 msgctxt "Function type|"
1184 msgid "Implicit Surface"
1185 msgstr "Implicit felület"
1186
1187 #: analitzaplot/private/backends/parametriccurve2d.cpp:37
1188 msgctxt "Function type|"
1189 msgid "Parametric Curve 2D"
1190 msgstr "Paraméteres görbe 2D"
1191
1192 #: analitzaplot/private/backends/parametriccurve3d.cpp:31
1193 msgctxt "Function type|"
1194 msgid "Parametric Curve 3D"
1195 msgstr "Paraméteres görbe 3D"
1196
1197 #: analitzaplot/private/backends/parametricsurface.cpp:32
1198 msgctxt "Function type|"
1199 msgid "Parametric Surface"
1200 msgstr "Paraméteres felület"
1201
1202 #: analitzaplot/private/backends/polarcurve.cpp:37
1203 msgctxt "Function type|"
1204 msgid "Polar Curve r=F(p: Polar)"
1205 msgstr "Poláris görbe r=F(p: polár)"
1206
1207 #: analitzaplot/private/backends/sphericalsurface.cpp:35
1208 msgctxt "Function type|"
1209 msgid "Spherical Surface Radial=F(t:Azimuth, p: Polar)"
1210 msgstr "Gömbfelület-sugár=F(t: azimut, p: polár)"
1211
1212 #: analitzawidgets/expressionedit.cpp:295
1213 #, qt-format
1214 msgctxt "QCoreApplication|"
1215 msgid "Result: %1"
1216 msgstr "Eredmény: %1"
1217
1218 #: analitzawidgets/expressionedit.cpp:405
1219 msgctxt "QCoreApplication|"
1220 msgid "To Expression"
1221 msgstr "kifejezésre"
1222
1223 #: analitzawidgets/expressionedit.cpp:407
1224 msgctxt "QCoreApplication|"
1225 msgid "To MathML"
1226 msgstr "MathML-re"
1227
1228 #: analitzawidgets/expressionedit.cpp:409
1229 msgctxt "QCoreApplication|"
1230 msgid "Simplify"
1231 msgstr "Egyszerűsítés"
1232
1233 #: analitzawidgets/expressionedit.cpp:411
1234 msgctxt "QCoreApplication|"
1235 msgid "Examples"
1236 msgstr "Példák"
1237
1238 #: analitzawidgets/plotsview2d.cpp:214
1239 msgctxt "QCoreApplication|"
1240 msgid "Selected viewport too small"
1241 msgstr "A kiválasztott nézőpont túl kicsi"
1242
1243 #~ msgctxt "NAME OF TRANSLATORS"
1244 #~ msgid "Your names"
1245 #~ msgstr "Úr Balázs"
1246
1247 #~ msgctxt "EMAIL OF TRANSLATORS"
1248 #~ msgid "Your emails"
1249 #~ msgstr "urbalazs@gmail.com"
1250
1251 #~ msgctxt "Parameter in function prototype"
1252 #~ msgid "par%1"
1253 #~ msgstr "par%1"
1254
1255 #~ msgctxt "Function parameter separator"
1256 #~ msgid ", "
1257 #~ msgstr ", "
1258
1259 #, fuzzy
1260 #~| msgid "Hyperbolic secant"
1261 #~ msgctxt "dictionary"
1262 #~ msgid "Hiperbola"
1263 #~ msgstr "Hiperbolikus szekáns"
1264
1265 #~ msgid "Function type not correct for functions depending on %1"
1266 #~ msgstr "A következőtől függő függvények típusa helytelen: %1"
1267
1268 #~ msgctxt ""
1269 #~ "This function can't be represented as a curve. To draw implicit curve, "
1270 #~ "the function has to satisfy the implicit function theorem."
1271 #~ msgid "Implicit function undefined in the plane"
1272 #~ msgstr "Az implicit függvény nincs definiálva a síkban"
1273
1274 #~ msgid "center"
1275 #~ msgstr "középre"
1276
1277 #~ msgctxt "@title:column"
1278 #~ msgid "Function"
1279 #~ msgstr "Függvény"
1280
1281 #~ msgid "%1 function added"
1282 #~ msgstr "%1 függvény hozzáadva"
1283
1284 #~ msgid "Hide '%1'"
1285 #~ msgstr "„%1” elrejtése"
1286
1287 #~ msgid "Show '%1'"
1288 #~ msgstr "„%1” megjelenítése"
1289
1290 #~ msgid "Remove '%1'"
1291 #~ msgstr "„%1” eltávolítása"
1292
1293 #~ msgctxt "Error message"
1294 #~ msgid "Unknown token %1"
1295 #~ msgstr "Ismeretlen token: %1"