poqm/gl/analitza_qt.po

0001 # Copyright (C) YEAR This_file_is_part_of_KDE
0002 # This file is distributed under the same license as the PACKAGE package.
0003 # Xosé <xosecalvo@gmail.com>, 2011, 2012.
0004 # Marce Villarino <mvillarino@kde-espana.es>, 2012, 2013, 2014.
0005 # Adrián Chaves Fernández <adriyetichaves@gmail.com>, 2015.
0006 # Adrián Chaves (Gallaecio) <adrian@chaves.io>, 2017, 2018, 2019, 2023.
0007 #
0008 msgid ""
0009 msgstr ""
0010 "Project-Id-Version: \n"
0011 "Report-Msgid-Bugs-To: http://bugs.kde.org\n"
0012 "POT-Creation-Date: 2014-02-16 03:26+0000\n"
0013 "PO-Revision-Date: 2023-05-11 23:57+0200\n"
0014 "Last-Translator: Adrián Chaves (Gallaecio) <adrian@chaves.io>\n"
0015 "Language-Team: Galician <proxecto@trasno.gal>\n"
0016 "Language: gl\n"
0017 "MIME-Version: 1.0\n"
0018 "Content-Type: text/plain; charset=UTF-8\n"
0019 "Content-Transfer-Encoding: 8bit\n"
0020 "Plural-Forms: nplurals=2; plural=n != 1;\n"
0021 "X-Generator: Lokalize 23.04.0\n"
0022 "X-Qt-Contexts: true\n"
0023
0024 msgctxt "QObject|dictionary"
0025 msgid "xaxaxaxaxa"
0026 msgstr "xaxaxaxaxa"
0027
0028 msgctxt "QObject|dictionary"
0029 msgid "cosa"
0030 msgstr "cosa"
0031
0032 #: analitza/analyzer.cpp:193
0033 msgctxt "QCoreApplication|"
0034 msgid "Cannot calculate an empty expression"
0035 msgstr "Non é posíbel calcular unha expresión baleira"
0036
0037 #: analitza/analyzer.cpp:240 analitza/analyzer.cpp:259
0038 #: analitza/analyzer.cpp:285
0039 msgctxt "QCoreApplication|"
0040 msgid "Must specify a correct operation"
0041 msgstr "Hai que indicar unha operación correcta"
0042
0043 #: analitza/analyzer.cpp:255 analitza/analyzer.cpp:288
0044 #, qt-format
0045 msgctxt "QCoreApplication|"
0046 msgid "Unknown identifier: '%1'"
0047 msgstr "Descoñécese este identificador: «%1»"
0048
0049 #: analitza/analyzer.cpp:257 analitza/analyzer.cpp:290
0050 msgctxt "identifier separator in error message|"
0051 msgid "', '"
0052 msgstr "', '"
0053
0054 #: analitza/analyzer.cpp:615
0055 msgctxt "Error message, no proper condition found.|"
0056 msgid "Could not find a proper choice for a condition statement."
0057 msgstr ""
0058 "Non foi posíbel atopar unha escolla axeitada para unha sentenza condicional."
0059
0060 #: analitza/analyzer.cpp:936
0061 msgctxt "QCoreApplication|"
0062 msgid "Type not supported for bounding."
0063 msgstr "Este tipo non está permitido para estabelecer límites."
0064
0065 #: analitza/analyzer.cpp:961
0066 msgctxt "QCoreApplication|"
0067 msgid "The downlimit is greater than the uplimit"
0068 msgstr "O límite inferior é maior que o superior."
0069
0070 #: analitza/analyzer.cpp:963
0071 msgctxt "QCoreApplication|"
0072 msgid "Incorrect uplimit or downlimit."
0073 msgstr "O límite superior ou o inferior son incorrectos."
0074
0075 #: analitza/analyzer.cpp:1055 analitza/analyzer.cpp:1080
0076 #, qt-format
0077 msgctxt "QCoreApplication|"
0078 msgid "Invalid type for parameter '%1'"
0079 msgstr "O tipo do parámetro «%1» é incorrecto."
0080
0081 #: analitza/analyzer.cpp:1877
0082 msgctxt "By a cycle i mean a variable that depends on itself|"
0083 msgid "Defined a variable cycle"
0084 msgstr "Definiuse un ciclo variábel"
0085
0086 #: analitza/analyzer.cpp:1919
0087 msgctxt "QCoreApplication|"
0088 msgid "The result is not a number"
0089 msgstr "O resultado non é un número"
0090
0091 #: analitza/commands/blockmatrixcommands.cpp:44
0092 #: analitza/commands/blockmatrixcommands.cpp:234
0093 #: analitza/commands/listcommands.cpp:47 analitza/commands/listcommands.cpp:64
0094 #: analitza/commands/matrixcommands.cpp:48
0095 #: analitza/commands/matrixcommands.cpp:201
0096 #: analitza/commands/vectorcommands.cpp:45
0097 #: analitza/commands/vectorcommands.cpp:82
0098 #, qt-format
0099 msgctxt "QCoreApplication|"
0100 msgid "Invalid parameter count for '%1'"
0101 msgstr "O número de parámetros de «%1» é incorrecto."
0102
0103 #: analitza/commands/blockmatrixcommands.cpp:86
0104 #: analitza/commands/blockmatrixcommands.cpp:119
0105 #: analitza/commands/blockmatrixcommands.cpp:122
0106 msgctxt "QCoreApplication|"
0107 msgid "Blocks must have consistent size between each and other"
0108 msgstr "Os bloques deben ter un tamaño coherente entre eles."
0109
0110 #: analitza/commands/blockmatrixcommands.cpp:90
0111 #: analitza/commands/blockmatrixcommands.cpp:126
0112 #: analitza/commands/blockmatrixcommands.cpp:263
0113 msgctxt "QCoreApplication|"
0114 msgid "Do not want empty blocks"
0115 msgstr "Os bloques non poden estar baleiros."
0116
0117 #: analitza/commands/blockmatrixcommands.cpp:93
0118 #: analitza/commands/blockmatrixcommands.cpp:130
0119 #: analitza/commands/blockmatrixcommands.cpp:209
0120 #: analitza/commands/blockmatrixcommands.cpp:267
0121 msgctxt "QCoreApplication|"
0122 msgid "Blocks must be matrices"
0123 msgstr "Os bloques deben ser matrices."
0124
0125 #: analitza/commands/blockmatrixcommands.cpp:142
0126 msgctxt "QCoreApplication|"
0127 msgid "Number of blocks must be consistent"
0128 msgstr "O número de bloques debe ser coherente."
0129
0130 #: analitza/commands/blockmatrixcommands.cpp:145
0131 #: analitza/commands/blockmatrixcommands.cpp:211
0132 #: analitza/commands/matrixcommands.cpp:147
0133 msgctxt "QCoreApplication|"
0134 msgid "Do not want empty vectors/matrixrow elements"
0135 msgstr "Os vectores e as filas de matrices non poden estar baleiros."
0136
0137 #: analitza/commands/blockmatrixcommands.cpp:150
0138 #: analitza/commands/blockmatrixcommands.cpp:213
0139 #: analitza/commands/matrixcommands.cpp:149
0140 msgctxt "QCoreApplication|"
0141 msgid "Matrix constructor needs vectors or matrixrow elements"
0142 msgstr "Os construtores de matrices requiren vectores ou filas de matrices."
0143
0144 #: analitza/commands/blockmatrixcommands.cpp:244
0145 #: analitza/commands/matrixcommands.cpp:288
0146 #, qt-format
0147 msgctxt "QCoreApplication|"
0148 msgid "the arg %1 is invalid or is error"
0149 msgstr "o argumento %1 é incorrecto ou é un erro"
0150
0151 #: analitza/commands/eigencommands.cpp:39
0152 #, qt-format
0153 msgctxt "QCoreApplication|"
0154 msgid "Invalid parameter count for '%1'. Should have 1 parameter"
0155 msgstr "O número de parámetros de «%1» é incorrecto. Debería ter 1 parámetro."
0156
0157 #: analitza/commands/eigencommands.cpp:47
0158 #, qt-format
0159 msgctxt "QCoreApplication|"
0160 msgid "To use '%1' command the input matrix must be square"
0161 msgstr "Para usar a orde «%1» a matriz de entrada ten que cadrarse."
0162
0163 #: analitza/commands/eigencommands.cpp:68
0164 #: analitza/commands/eigencommands.cpp:74
0165 #, qt-format
0166 msgctxt "QCoreApplication|"
0167 msgid ""
0168 "Invalid parameter type in matrix entry (%1,%2) for '%3', it must be a number "
0169 "value"
0170 msgstr ""
0171 "O tipo do parámetro da entrada (%1,%2) da matriz para «%3» é incorrecto. Ten "
0172 "que ser un valor numérico."
0173
0174 #: analitza/commands/eigencommands.cpp:126
0175 #: analitza/commands/eigencommands.cpp:193
0176 msgctxt "QCoreApplication|NaN means Not a Number, is an invalid float number"
0177 msgid "Returned eigenvalue is NaN"
0178 msgstr "O valor propio devolto é NaN."
0179
0180 #: analitza/commands/eigencommands.cpp:132
0181 #: analitza/commands/eigencommands.cpp:196
0182 msgctxt "QCoreApplication|"
0183 msgid "Returned eigenvalue is too big"
0184 msgstr "O valor propio devolto é excesivamente grande."
0185
0186 #: analitza/commands/matrixcommands.cpp:31
0187 msgctxt "QCoreApplication|"
0188 msgid "Matrix dimensions must be greater than zero"
0189 msgstr "As dimensións da matriz deben ser superiores a 0."
0190
0191 #: analitza/commands/matrixcommands.cpp:122 analitza/expression.cpp:296
0192 msgctxt "QCoreApplication|"
0193 msgid "All matrixrow elements must have the same size"
0194 msgstr "Todas as filas de matriz deben ter o mesmo tamaño."
0195
0196 #: analitza/commands/matrixcommands.cpp:127
0197 msgctxt "QCoreApplication|"
0198 msgid "Not all are rows or vectors"
0199 msgstr "Non todos son filas ou vectores."
0200
0201 #: analitza/commands/matrixcommands.cpp:143
0202 msgctxt "QCoreApplication|"
0203 msgid "Every argument must be a matrixrow element"
0204 msgstr "Todos os argumentos deben ser filas de matriz."
0205
0206 #: analitza/commands/matrixcommands.cpp:241
0207 msgctxt "QCoreApplication|"
0208 msgid "The nth diagonal index must be less than the row count"
0209 msgstr "O último índice diagonal debe ser inferior ao número de filas."
0210
0211 #: analitza/commands/matrixcommands.cpp:249
0212 msgctxt "QCoreApplication|"
0213 msgid "The nth diagonal index must be less than the column count"
0214 msgstr "O último índice diagonal debe ser inferior ao número de columnas."
0215
0216 #: analitza/commands/matrixcommands.cpp:265
0217 msgctxt "QCoreApplication|"
0218 msgid "nth diagonal index must be integer number"
0219 msgstr "O último índice diagonal debe ser un número enteiro."
0220
0221 #: analitza/commands/matrixcommands.cpp:269
0222 msgctxt "QCoreApplication|"
0223 msgid "nth diagonal index must be a positive integer number"
0224 msgstr "O último índice diagonal debe ser un número enteiro positivo."
0225
0226 #: analitza/commands/vectorcommands.cpp:62
0227 #, qt-format
0228 msgctxt "QCoreApplication|"
0229 msgid "Invalid parameter type for '%1', was expected a list"
0230 msgstr "O tipo do parámetro para «%1» é incorrecto, esperábase unha lista."
0231
0232 #: analitza/commands/vectorcommands.cpp:75
0233 #: analitza/commands/vectorcommands.cpp:78
0234 msgctxt "QCoreApplication|"
0235 msgid "Vector size must be some integer value greater to zero"
0236 msgstr "O tamaño do vector debe ser un número enteiro maior que 0."
0237
0238 #: analitza/explexer.cpp:78
0239 msgctxt "QCoreApplication|"
0240 msgid "Unexpectedly arrived to the end of the input"
0241 msgstr "Chegouse inesperadamente ao final da entrada."
0242
0243 #: analitza/explexer.cpp:112
0244 #, qt-format
0245 msgctxt "QCoreApplication|"
0246 msgid "Unknown token %1"
0247 msgstr "Descoñécese o código %1."
0248
0249 #: analitza/expression.cpp:162
0250 #, qt-format
0251 msgctxt "QCoreApplication|"
0252 msgid "<em>%1</em> needs at least 2 parameters"
0253 msgstr "<em>%1</em> precisa polo menos 2 parámetros."
0254
0255 #: analitza/expression.cpp:164
0256 #, qt-format
0257 msgctxt "QCoreApplication|"
0258 msgid "<em>%1</em> requires %2 parameters"
0259 msgstr "<em>%1</em> precisa %2 parámetros."
0260
0261 #: analitza/expression.cpp:171
0262 #, qt-format
0263 msgctxt "QCoreApplication|"
0264 msgid "Missing boundary for '%1'"
0265 msgstr "Falta o límite de «%1»."
0266
0267 #: analitza/expression.cpp:173
0268 #, qt-format
0269 msgctxt "QCoreApplication|"
0270 msgid "Unexpected bounding for '%1'"
0271 msgstr "Límites inesperados en «%1»."
0272
0273 #: analitza/expression.cpp:178
0274 #, qt-format
0275 msgctxt "QCoreApplication|"
0276 msgid "<em>%1</em> missing bounds on '%2'"
0277 msgstr "Faltan <em>%1</em> límites en «%2»."
0278
0279 #: analitza/expression.cpp:200
0280 msgctxt "QCoreApplication|"
0281 msgid "Wrong declare"
0282 msgstr "A declaración é incorrecta"
0283
0284 #: analitza/expression.cpp:210
0285 #, qt-format
0286 msgctxt "QCoreApplication|"
0287 msgid "Empty container: %1"
0288 msgstr "O contedor está baleiro: %1"
0289
0290 #: analitza/expression.cpp:228
0291 msgctxt "there was a conditional outside a condition structure|"
0292 msgid "We can only have conditionals inside piecewise structures."
0293 msgstr "Só pode haber condicións dentro de estruturas de segmentos."
0294
0295 #: analitza/expression.cpp:244
0296 #, qt-format
0297 msgctxt "QCoreApplication|"
0298 msgid "Cannot have two parameters with the same name like '%1'."
0299 msgstr "Non é posíbel ter dous parámetros co mesmo nome que «%1»."
0300
0301 #: analitza/expression.cpp:259
0302 msgctxt ""
0303 "this is an error message. otherwise is the else in a mathml condition|"
0304 msgid "The <em>otherwise</em> parameter should be the last one"
0305 msgstr "O parámetro <em>otherwise</em> debería ser o derradeiro"
0306
0307 #: analitza/expression.cpp:267
0308 #, qt-format
0309 msgctxt "there was an element that was not a conditional inside a condition|"
0310 msgid "%1 is not a proper condition inside the piecewise"
0311 msgstr "%1 non é unha condición axeitada dentro do conxunto de pezas"
0312
0313 #: analitza/expression.cpp:273
0314 msgctxt "QCoreApplication|"
0315 msgid "We can only declare variables"
0316 msgstr "Só se poden declarar variábeis"
0317
0318 #: analitza/expression.cpp:279
0319 msgctxt "QCoreApplication|"
0320 msgid "We can only have bounded variables"
0321 msgstr "Só poden existir variábeis asociadas"
0322
0323 #: analitza/expression.cpp:290 analitza/expression.cpp:495
0324 msgctxt "QCoreApplication|"
0325 msgid "Do not want empty matrixrow elements"
0326 msgstr "As filas de matrices non poden estar baleiras."
0327
0328 #: analitza/expression.cpp:300
0329 msgctxt "QCoreApplication|"
0330 msgid "The matrix must contain only matrixrow elements"
0331 msgstr "A matriz debe conter só filas de matriz."
0332
0333 #: analitza/expression.cpp:419
0334 #, qt-format
0335 msgctxt "QCoreApplication|"
0336 msgid "Error while parsing: %1"
0337 msgstr "Produciuse un erro ao procesar: %1"
0338
0339 #: analitza/expression.cpp:450
0340 #, qt-format
0341 msgctxt "An error message|"
0342 msgid "Container unknown: %1"
0343 msgstr "Descoñécese o contedor: %1"
0344
0345 #: analitza/expression.cpp:456
0346 #, qt-format
0347 msgctxt "QCoreApplication|"
0348 msgid "Cannot codify the %1 value."
0349 msgstr "Non é posíbel codificar o valor %1."
0350
0351 #: analitza/expression.cpp:462
0352 #, qt-format
0353 msgctxt "QCoreApplication|"
0354 msgid "The %1 operator cannot have child contexts."
0355 msgstr "O operador %1 non pode ter contextos fillos."
0356
0357 #: analitza/expression.cpp:466
0358 #, qt-format
0359 msgctxt "QCoreApplication|"
0360 msgid "The element '%1' is not an operator."
0361 msgstr "O elemento «%1» non é un operador."
0362
0363 #: analitza/expression.cpp:479
0364 msgctxt "QCoreApplication|"
0365 msgid "Do not want empty vectors"
0366 msgstr "Os vectores non poden estar baleiros."
0367
0368 #: analitza/expression.cpp:489
0369 msgctxt "QCoreApplication|"
0370 msgid "Do not want empty matrices"
0371 msgstr "As matrices non poden estar baleiras."
0372
0373 #: analitza/expression.cpp:508
0374 #, qt-format
0375 msgctxt "Error message due to an unrecognized input|"
0376 msgid "Not supported/unknown: %1"
0377 msgstr "Non admitido/descoñecido: %1"
0378
0379 #: analitza/expressionparser.cpp:296
0380 msgctxt "QCoreApplication|"
0381 msgid ", "
0382 msgstr ", "
0383
0384 #: analitza/expressionparser.cpp:296
0385 #, qt-format
0386 msgctxt "error message|"
0387 msgid "Expected %1 instead of '%2'"
0388 msgstr "Agardábase %1 no canto de «%2»."
0389
0390 #: analitza/expressionparser.cpp:298
0391 msgctxt "QCoreApplication|"
0392 msgid "Missing right parenthesis"
0393 msgstr "Falta un paréntese dereito"
0394
0395 #: analitza/expressionparser.cpp:300
0396 msgctxt "QCoreApplication|"
0397 msgid "Unbalanced right parenthesis"
0398 msgstr "Paréntese dereito desequilibrado"
0399
0400 #: analitza/expressionparser.cpp:303
0401 #, qt-format
0402 msgctxt "QCoreApplication|"
0403 msgid "Unexpected token identifier: %1"
0404 msgstr "Identificador de token inesperado: %1"
0405
0406 #: analitza/expressionparser.cpp:305
0407 #, qt-format
0408 msgctxt "QCoreApplication|"
0409 msgid "Unexpected token %1"
0410 msgstr "Non se agardaba o código %1."
0411
0412 #: analitza/expressiontypechecker.cpp:301
0413 #, qt-format
0414 msgctxt "QCoreApplication|"
0415 msgid "Could not find a type that unifies '%1'"
0416 msgstr "Non foi posíbel atopar un tipo que unifique «%1»."
0417
0418 #: analitza/expressiontypechecker.cpp:473
0419 msgctxt "QCoreApplication|"
0420 msgid "The domain should be either a vector or a list"
0421 msgstr "O dominio ten que ser ou un vector ou unha lista."
0422
0423 #: analitza/expressiontypechecker.cpp:558
0424 #, qt-format
0425 msgctxt "type error message|"
0426 msgid "Cannot call '%1'"
0427 msgstr "Non é posíbel chamar a «%1»."
0428
0429 #: analitza/expressiontypechecker.cpp:593
0430 #, qt-format
0431 msgctxt "QCoreApplication|"
0432 msgid "Cannot reduce '%1' to '%2'. Invalid type of parameter '%3' for '%4'"
0433 msgstr ""
0434 "Non é posíbel reducir «%1» a «%2». O tipo do parámetro «%3» para «%4» é "
0435 "incorrecto."
0436
0437 #: analitza/expressiontypechecker.cpp:604
0438 #, qt-format
0439 msgctxt "QCoreApplication|"
0440 msgid "Invalid parameter count for '%2'. Should have %1 parameters."
0441 msgstr ""
0442 "O número de parámetros de «%2» é incorrecto. Debería ter %1 parámetros."
0443
0444 #: analitza/expressiontypechecker.cpp:616
0445 #, qt-format
0446 msgctxt "QCoreApplication|"
0447 msgid "Cannot compare '%1' to '%2'. Invalid type of parameter '%3' for '%4'"
0448 msgstr ""
0449 "Non é posíbel comparar «%1» a «%2». O tipo do parámetro «%3» para «%4» é "
0450 "incorrecto."
0451
0452 #: analitza/expressiontypechecker.cpp:654
0453 #, qt-format
0454 msgctxt "QCoreApplication|"
0455 msgid "Could not call '%1'"
0456 msgstr "Non foi posíbel chamar por «%1»."
0457
0458 #: analitza/expressiontypechecker.cpp:662
0459 #, qt-format
0460 msgctxt "QCoreApplication|"
0461 msgid "Could not solve '%1'"
0462 msgstr "Non foi posíbel resolver «%1»."
0463
0464 #: analitza/expressiontypechecker.cpp:695
0465 #, qt-format
0466 msgctxt "QCoreApplication|"
0467 msgid "Incoherent type for the variable '%1'"
0468 msgstr "A variábel «%1» é dun tipo incoherente."
0469
0470 #: analitza/expressiontypechecker.cpp:718
0471 msgctxt "QCoreApplication|"
0472 msgid "Could not determine the type for piecewise"
0473 msgstr "Non foi posíbel determinar o tipo de segmento."
0474
0475 #: analitza/expressiontypechecker.cpp:937
0476 msgctxt "QCoreApplication|"
0477 msgid "Unexpected type"
0478 msgstr "Tipo inesperado"
0479
0480 #: analitza/expressiontypechecker.cpp:960
0481 #, qt-format
0482 msgctxt "QCoreApplication|"
0483 msgid "Cannot convert '%1' to '%2'"
0484 msgstr "Non é posíbel converter «%1» en «%2»."
0485
0486 #: analitza/htmlexpressionwriter.cpp:54 analitza/htmlexpressionwriter.cpp:55
0487 #, qt-format
0488 msgctxt "html representation of an operator|"
0489 msgid "<span class='op'>%1</span>"
0490 msgstr "<span class='op'>%1</span>"
0491
0492 #: analitza/htmlexpressionwriter.cpp:56
0493 #, qt-format
0494 msgctxt "html representation of an operator|"
0495 msgid "<span class='keyword'>%1</span>"
0496 msgstr "<span class='keyword'>%1</span>"
0497
0498 #: analitza/mathmlpresentationlexer.cpp:94
0499 #, qt-format
0500 msgctxt "Error message|"
0501 msgid "Unknown token '%1'"
0502 msgstr "Descoñécese o código «%1»."
0503
0504 #: analitza/operations.cpp:54 analitza/operations.cpp:191
0505 msgctxt "QCoreApplication|"
0506 msgid "Cannot divide by 0."
0507 msgstr "Non é posíbel dividir por 0."
0508
0509 #: analitza/operations.cpp:72 analitza/operations.cpp:203
0510 msgctxt "QCoreApplication|"
0511 msgid "Cannot calculate the remainder on 0."
0512 msgstr "Non é posíbel calcular o resto de 0."
0513
0514 #: analitza/operations.cpp:84 analitza/operations.cpp:213
0515 msgctxt "QCoreApplication|"
0516 msgid "Cannot calculate the factor on 0."
0517 msgstr "Non é posíbel calcular o factor de 0."
0518
0519 #: analitza/operations.cpp:140 analitza/operations.cpp:261
0520 msgctxt "QCoreApplication|"
0521 msgid "Cannot calculate the lcm of 0."
0522 msgstr "Non é posíbel calcular o mínimo común múltiplo de 0."
0523
0524 #: analitza/operations.cpp:246
0525 msgctxt "QCoreApplication|"
0526 msgid "Boolean operations on complex numbers not available"
0527 msgstr "Non é posíbel realizar operacións lóxicas sobre números complexos."
0528
0529 #: analitza/operations.cpp:276
0530 msgctxt "QCoreApplication|"
0531 msgid "Only square root implemented for complex numbers"
0532 msgstr "Só se pode calcular a raíz cadrada dos números complexos."
0533
0534 #: analitza/operations.cpp:351 analitza/operations.cpp:463
0535 #, qt-format
0536 msgctxt "QCoreApplication|"
0537 msgid "Could not calculate a value %1"
0538 msgstr "Non foi posíbel calcular un valor %1."
0539
0540 #: analitza/operations.cpp:479
0541 #, qt-format
0542 msgctxt "QCoreApplication|"
0543 msgid "Cannot calculate %1 between a value and an error type"
0544 msgstr "Non é posíbel calcular %1 entre un valor e un tipo de erro."
0545
0546 #: analitza/operations.cpp:495 analitza/operations.cpp:652
0547 #: analitza/operations.cpp:784
0548 msgctxt "QCoreApplication|"
0549 msgid "Invalid index for a container"
0550 msgstr "O índice do contedor é incorrecto"
0551
0552 #: analitza/operations.cpp:527
0553 #, qt-format
0554 msgctxt "QCoreApplication|"
0555 msgid "Cannot operate '%1' on different sized vectors."
0556 msgstr "Non é posíbel operar «%1» con vectores de tamaños distintos."
0557
0558 #: analitza/operations.cpp:566
0559 msgctxt "QCoreApplication|"
0560 msgid ""
0561 "Multiplication between a matrix and a vector is allowed provided that the "
0562 "number of columns of the matrix equals the size of the vector"
0563 msgstr ""
0564 "Só se permite multiplicar unha matriz por un vector se o número de columnas "
0565 "da matriz é igual ao tamaño do vector."
0566
0567 #: analitza/operations.cpp:570 analitza/operations.cpp:707
0568 msgctxt "QCoreApplication|"
0569 msgid "Matrix and vector entries must be numbers"
0570 msgstr "As entradas da matriz e do vector deben ser números."
0571
0572 #: analitza/operations.cpp:599
0573 #, qt-format
0574 msgctxt "QCoreApplication|"
0575 msgid "Could not calculate a vector's %1"
0576 msgstr "Non foi posíbel calcular o %1 dun vector"
0577
0578 #: analitza/operations.cpp:621 analitza/operations.cpp:637
0579 #, qt-format
0580 msgctxt "QCoreApplication|"
0581 msgid "Could not calculate a list's %1"
0582 msgstr "Non foi posíbel calcular o %1 dunha lista"
0583
0584 #: analitza/operations.cpp:703
0585 msgctxt "QCoreApplication|"
0586 msgid ""
0587 "Multiplication between a vector and a matrix is allowed provided that the "
0588 "matrix has only one matrixrow element"
0589 msgstr ""
0590 "Só se permite multiplicar un vector por unha matriz se a matriz contén só "
0591 "unha fila."
0592
0593 #: analitza/operations.cpp:730
0594 msgctxt "QCoreApplication|"
0595 msgid ""
0596 "Addition of two matrices is allowed provided that both matrices have the "
0597 "same number of rows and the same number of columns"
0598 msgstr ""
0599 "Só se permite sumar dúas matrices se ambas as dúas teñen as mesmas "
0600 "dimensións."
0601
0602 #: analitza/operations.cpp:762
0603 msgctxt "QCoreApplication|"
0604 msgid ""
0605 "Multiplication of two matrices is allowed provided that the number of "
0606 "columns of the first matrix equals the number of rows of the second matrix"
0607 msgstr ""
0608 "Só se permite multiplicar dúas matrices se o número de columnas da primeira "
0609 "matriz é igual ao número de filas da segunda matriz."
0610
0611 #: analitza/operations.cpp:766 analitza/operations.cpp:804
0612 #: analitza/operations.cpp:887
0613 msgctxt "QCoreApplication|"
0614 msgid "Matrix entries must be numbers"
0615 msgstr "As entradas da matriz deben ser números."
0616
0617 #: analitza/operations.cpp:879
0618 msgctxt "QCoreApplication|"
0619 msgid "The exponent of 'power' must be some integer number"
0620 msgstr "O expoñente de «power» debe ser un número enteiro."
0621
0622 #: analitza/operations.cpp:883
0623 msgctxt "QCoreApplication|"
0624 msgid "Cannot compute 'power' for non square matrix"
0625 msgstr "Non é posíbel calcular «power» dunha matriz que non é cadrada."
0626
0627 #: analitza/operations.cpp:922
0628 #, qt-format
0629 msgctxt "QCoreApplication|"
0630 msgid "Cannot calculate %1 between a matrix and an error type"
0631 msgstr "Non é posíbel calcular %1 entre unha matriz e un tipo de erro."
0632
0633 #: analitza/providederivative.cpp:93
0634 #, qt-format
0635 msgctxt "QCoreApplication|"
0636 msgid "Could not calculate the derivative for '%1'"
0637 msgstr "Non foi posíbel calcular unha derivada de «%1»"
0638
0639 #: analitzagui/operatorsmodel.cpp:95 analitzagui/variablesmodel.cpp:91
0640 #: analitzaplot/plotsdictionarymodel.cpp:36 analitzaplot/plotsmodel.cpp:78
0641 msgctxt "@title:column|"
0642 msgid "Name"
0643 msgstr "Nome"
0644
0645 #: analitzagui/operatorsmodel.cpp:98
0646 msgctxt "@title:column|"
0647 msgid "Description"
0648 msgstr "Descrición"
0649
0650 #: analitzagui/operatorsmodel.cpp:101
0651 msgctxt "@title:column|"
0652 msgid "Parameters"
0653 msgstr "Parámetros"
0654
0655 #: analitzagui/operatorsmodel.cpp:104
0656 msgctxt "@title:column|"
0657 msgid "Example"
0658 msgstr "Exemplo"
0659
0660 #: analitzagui/operatorsmodel.cpp:135
0661 msgctxt "Syntax for function bounding|"
0662 msgid " : var"
0663 msgstr " : var"
0664
0665 #: analitzagui/operatorsmodel.cpp:137
0666 msgctxt "Syntax for function bounding values|"
0667 msgid "=from..to"
0668 msgstr "=de..ata"
0669
0670 #: analitzagui/operatorsmodel.cpp:140
0671 #, qt-format
0672 msgctxt "QCoreApplication|"
0673 msgid "%1("
0674 msgstr "%1("
0675
0676 #: analitzagui/operatorsmodel.cpp:143
0677 #, qt-format
0678 msgctxt "QCoreApplication|"
0679 msgid "%1... parameters, ...%2)"
0680 msgstr "%1… parámetros, …%2)"
0681
0682 #: analitzagui/operatorsmodel.cpp:146
0683 #, qt-format
0684 msgctxt "QCoreApplication|"
0685 msgid "par%1"
0686 msgstr "par%1"
0687
0688 #: analitzagui/operatorsmodel.cpp:159
0689 msgctxt "QCoreApplication|"
0690 msgid "Addition"
0691 msgstr "Suma"
0692
0693 #: analitzagui/operatorsmodel.cpp:162
0694 msgctxt "QCoreApplication|"
0695 msgid "Multiplication"
0696 msgstr "Multiplicación"
0697
0698 #: analitzagui/operatorsmodel.cpp:165
0699 msgctxt "QCoreApplication|"
0700 msgid "Division"
0701 msgstr "División"
0702
0703 #: analitzagui/operatorsmodel.cpp:168
0704 msgctxt "QCoreApplication|"
0705 msgid "Subtraction. Will remove all values from the first one."
0706 msgstr "Resta. Retira todos os valores do primeiro."
0707
0708 #: analitzagui/operatorsmodel.cpp:171
0709 msgctxt "QCoreApplication|"
0710 msgid "Power"
0711 msgstr "Potencia"
0712
0713 #: analitzagui/operatorsmodel.cpp:174
0714 msgctxt "QCoreApplication|"
0715 msgid "Remainder"
0716 msgstr "Resto"
0717
0718 #: analitzagui/operatorsmodel.cpp:177
0719 msgctxt "QCoreApplication|"
0720 msgid "Quotient"
0721 msgstr "Cociente"
0722
0723 #: analitzagui/operatorsmodel.cpp:180
0724 msgctxt "QCoreApplication|"
0725 msgid "The factor of"
0726 msgstr "O factor de"
0727
0728 #: analitzagui/operatorsmodel.cpp:183
0729 msgctxt "QCoreApplication|"
0730 msgid "Factorial. factorial(n)=n!"
0731 msgstr "Factorial. factorial(n)=n!"
0732
0733 #: analitzagui/operatorsmodel.cpp:186
0734 msgctxt "QCoreApplication|"
0735 msgid "Function to calculate the sine of a given angle"
0736 msgstr "Función para calcular o seno dun ángulo dado"
0737
0738 #: analitzagui/operatorsmodel.cpp:189
0739 msgctxt "QCoreApplication|"
0740 msgid "Function to calculate the cosine of a given angle"
0741 msgstr "Función para calcular o coseno dun ángulo dado"
0742
0743 #: analitzagui/operatorsmodel.cpp:192
0744 msgctxt "QCoreApplication|"
0745 msgid "Function to calculate the tangent of a given angle"
0746 msgstr "Función para calcular a tanxente dun ángulo dado"
0747
0748 #: analitzagui/operatorsmodel.cpp:195
0749 msgctxt "QCoreApplication|"
0750 msgid "Secant"
0751 msgstr "Secante"
0752
0753 #: analitzagui/operatorsmodel.cpp:198
0754 msgctxt "QCoreApplication|"
0755 msgid "Cosecant"
0756 msgstr "Cosecante"
0757
0758 #: analitzagui/operatorsmodel.cpp:201
0759 msgctxt "QCoreApplication|"
0760 msgid "Cotangent"
0761 msgstr "Cotanxente"
0762
0763 #: analitzagui/operatorsmodel.cpp:204
0764 msgctxt "QCoreApplication|"
0765 msgid "Hyperbolic sine"
0766 msgstr "Seno hiperbólico"
0767
0768 #: analitzagui/operatorsmodel.cpp:207
0769 msgctxt "QCoreApplication|"
0770 msgid "Hyperbolic cosine"
0771 msgstr "Coseno hiperbólico"
0772
0773 #: analitzagui/operatorsmodel.cpp:210
0774 msgctxt "QCoreApplication|"
0775 msgid "Hyperbolic tangent"
0776 msgstr "Tanxente hiperbólica"
0777
0778 #: analitzagui/operatorsmodel.cpp:213
0779 msgctxt "QCoreApplication|"
0780 msgid "Hyperbolic secant"
0781 msgstr "Secante hiperbólica"
0782
0783 #: analitzagui/operatorsmodel.cpp:216
0784 msgctxt "QCoreApplication|"
0785 msgid "Hyperbolic cosecant"
0786 msgstr "Cosecante hiperbólica"
0787
0788 #: analitzagui/operatorsmodel.cpp:219
0789 msgctxt "QCoreApplication|"
0790 msgid "Hyperbolic cotangent"
0791 msgstr "Cotanxente hiperbólica"
0792
0793 #: analitzagui/operatorsmodel.cpp:222
0794 msgctxt "QCoreApplication|"
0795 msgid "Arc sine"
0796 msgstr "Arco seno"
0797
0798 #: analitzagui/operatorsmodel.cpp:225
0799 msgctxt "QCoreApplication|"
0800 msgid "Arc cosine"
0801 msgstr "Arco coseno"
0802
0803 #: analitzagui/operatorsmodel.cpp:228
0804 msgctxt "QCoreApplication|"
0805 msgid "Arc tangent"
0806 msgstr "Arco tanxente"
0807
0808 #: analitzagui/operatorsmodel.cpp:231
0809 msgctxt "QCoreApplication|"
0810 msgid "Arc cotangent"
0811 msgstr "Arco cotanxente"
0812
0813 #: analitzagui/operatorsmodel.cpp:237
0814 msgctxt "QCoreApplication|"
0815 msgid "Hyperbolic arc tangent"
0816 msgstr "Arco tanxente hiperbólica"
0817
0818 #: analitzagui/operatorsmodel.cpp:240
0819 msgctxt "QCoreApplication|"
0820 msgid "Summatory"
0821 msgstr "Sumatorio"
0822
0823 #: analitzagui/operatorsmodel.cpp:243
0824 msgctxt "QCoreApplication|"
0825 msgid "Productory"
0826 msgstr "Produto"
0827
0828 #: analitzagui/operatorsmodel.cpp:246
0829 msgctxt "QCoreApplication|"
0830 msgid "For all"
0831 msgstr "Para todo"
0832
0833 #: analitzagui/operatorsmodel.cpp:249
0834 msgctxt "QCoreApplication|"
0835 msgid "Exists"
0836 msgstr "Existe"
0837
0838 #: analitzagui/operatorsmodel.cpp:252
0839 msgctxt "QCoreApplication|"
0840 msgid "Differentiation"
0841 msgstr "Diferenciación"
0842
0843 #: analitzagui/operatorsmodel.cpp:255
0844 msgctxt "QCoreApplication|"
0845 msgid "Hyperbolic arc sine"
0846 msgstr "Arco seno hiperbólico"
0847
0848 #: analitzagui/operatorsmodel.cpp:258
0849 msgctxt "QCoreApplication|"
0850 msgid "Hyperbolic arc cosine"
0851 msgstr "Arco coseno hiperbólico"
0852
0853 #: analitzagui/operatorsmodel.cpp:261
0854 msgctxt "QCoreApplication|"
0855 msgid "Arc cosecant"
0856 msgstr "Arco cosecante"
0857
0858 #: analitzagui/operatorsmodel.cpp:264
0859 msgctxt "QCoreApplication|"
0860 msgid "Hyperbolic arc cosecant"
0861 msgstr "Arco cosecante hiperbólico"
0862
0863 #: analitzagui/operatorsmodel.cpp:267
0864 msgctxt "QCoreApplication|"
0865 msgid "Arc secant"
0866 msgstr "Arco secante"
0867
0868 #: analitzagui/operatorsmodel.cpp:270
0869 msgctxt "QCoreApplication|"
0870 msgid "Hyperbolic arc secant"
0871 msgstr "Arco secante hiperbólico"
0872
0873 #: analitzagui/operatorsmodel.cpp:273
0874 msgctxt "QCoreApplication|"
0875 msgid "Exponent (e^x)"
0876 msgstr "Expoñente (e^x)"
0877
0878 #: analitzagui/operatorsmodel.cpp:276
0879 msgctxt "QCoreApplication|"
0880 msgid "Base-e logarithm"
0881 msgstr "Logaritmo neperiano"
0882
0883 #: analitzagui/operatorsmodel.cpp:279
0884 msgctxt "QCoreApplication|"
0885 msgid "Base-10 logarithm"
0886 msgstr "Logaritmo decimal"
0887
0888 #: analitzagui/operatorsmodel.cpp:282
0889 msgctxt "QCoreApplication|"
0890 msgid "Absolute value. abs(n)=|n|"
0891 msgstr "Valor absoluto. abs(n)=|n|"
0892
0893 #: analitzagui/operatorsmodel.cpp:285
0894 msgctxt "QCoreApplication|"
0895 msgid "Conjugate"
0896 msgstr "Conxugar"
0897
0898 #: analitzagui/operatorsmodel.cpp:288
0899 msgctxt "QCoreApplication|"
0900 msgid "Arg"
0901 msgstr "Arg"
0902
0903 #: analitzagui/operatorsmodel.cpp:291
0904 msgctxt "QCoreApplication|"
0905 msgid "Real"
0906 msgstr "Real"
0907
0908 #: analitzagui/operatorsmodel.cpp:294
0909 msgctxt "QCoreApplication|"
0910 msgid "Imaginary"
0911 msgstr "Imaxinario"
0912
0913 #: analitzagui/operatorsmodel.cpp:297
0914 msgctxt "QCoreApplication|"
0915 msgid "Floor value. floor(n)=⌊n⌋"
0916 msgstr "Enteiro inmediatamente inferior. floor(n)=⌊n⌋"
0917
0918 #: analitzagui/operatorsmodel.cpp:300
0919 msgctxt "QCoreApplication|"
0920 msgid "Ceil value. ceil(n)=⌈n⌉"
0921 msgstr "Enteiro inmediatamente superior. ceil(n)=⌈n⌉"
0922
0923 #: analitzagui/operatorsmodel.cpp:303
0924 msgctxt "QCoreApplication|"
0925 msgid "Minimum"
0926 msgstr "Mínimo"
0927
0928 #: analitzagui/operatorsmodel.cpp:306
0929 msgctxt "QCoreApplication|"
0930 msgid "Maximum"
0931 msgstr "Máximo"
0932
0933 #: analitzagui/operatorsmodel.cpp:309
0934 msgctxt "QCoreApplication|"
0935 msgid "Greater than. gt(a,b)=a>b"
0936 msgstr "Maior que, gt(a,b)=a>b"
0937
0938 #: analitzagui/operatorsmodel.cpp:312
0939 msgctxt "QCoreApplication|"
0940 msgid "Less than. lt(a,b)=a<b"
0941 msgstr "Menor que. lt(a,b)=a<b"
0942
0943 #: analitzagui/operatorsmodel.cpp:315
0944 msgctxt "QCoreApplication|"
0945 msgid "Equal. eq(a,b) = a=b"
0946 msgstr "Igual a. eq(a,b) = a=b"
0947
0948 #: analitzagui/operatorsmodel.cpp:318
0949 msgctxt "QCoreApplication|"
0950 msgid "Approximation. approx(a)=a±n"
0951 msgstr "Aproximación. approx(a)=a±n"
0952
0953 #: analitzagui/operatorsmodel.cpp:321
0954 msgctxt "QCoreApplication|"
0955 msgid "Not equal. neq(a,b)=a≠b"
0956 msgstr "Non igual. neq(a,b)=a≠b"
0957
0958 #: analitzagui/operatorsmodel.cpp:324
0959 msgctxt "QCoreApplication|"
0960 msgid "Greater or equal. geq(a,b)=a≥b"
0961 msgstr "Maior ou igual. geq(a,b)=a≥b"
0962
0963 #: analitzagui/operatorsmodel.cpp:327
0964 msgctxt "QCoreApplication|"
0965 msgid "Less or equal. leq(a,b)=a≤b"
0966 msgstr "Menor ou igual. leq(a,b)=a≤b"
0967
0968 #: analitzagui/operatorsmodel.cpp:330
0969 msgctxt "QCoreApplication|"
0970 msgid "Boolean and"
0971 msgstr "«E» lóxico"
0972
0973 #: analitzagui/operatorsmodel.cpp:333
0974 msgctxt "QCoreApplication|"
0975 msgid "Boolean not"
0976 msgstr "«Non» lóxico"
0977
0978 #: analitzagui/operatorsmodel.cpp:336
0979 msgctxt "QCoreApplication|"
0980 msgid "Boolean or"
0981 msgstr "«Ou» lóxico"
0982
0983 #: analitzagui/operatorsmodel.cpp:339
0984 msgctxt "QCoreApplication|"
0985 msgid "Boolean xor"
0986 msgstr "«Xor» lóxico"
0987
0988 #: analitzagui/operatorsmodel.cpp:342
0989 msgctxt "QCoreApplication|"
0990 msgid "Boolean implication"
0991 msgstr "Implicación lóxica"
0992
0993 #: analitzagui/operatorsmodel.cpp:345
0994 msgctxt "QCoreApplication|"
0995 msgid "Greatest common divisor"
0996 msgstr "Máximo común divisor"
0997
0998 #: analitzagui/operatorsmodel.cpp:348
0999 msgctxt "QCoreApplication|"
1000 msgid "Least common multiple"
1001 msgstr "Mínimo común múltiplo"
1002
1003 #: analitzagui/operatorsmodel.cpp:351
1004 msgctxt "QCoreApplication|"
1005 msgid "Root"
1006 msgstr "Raíz"
1007
1008 #: analitzagui/operatorsmodel.cpp:354
1009 msgctxt "QCoreApplication|"
1010 msgid "Cardinal"
1011 msgstr "Cardinal"
1012
1013 #: analitzagui/operatorsmodel.cpp:357
1014 msgctxt "QCoreApplication|"
1015 msgid "Scalar product"
1016 msgstr "Produto escalar"
1017
1018 #: analitzagui/operatorsmodel.cpp:360
1019 msgctxt "QCoreApplication|"
1020 msgid "Select the par1-th element of par2 list or vector"
1021 msgstr "Escolle o elemento nº par1 da lista ou vector par2"
1022
1023 #: analitzagui/operatorsmodel.cpp:363
1024 msgctxt "QCoreApplication|"
1025 msgid "Joins several items of the same type"
1026 msgstr "Xunta varios elementos do mesmo tipo"
1027
1028 #: analitzagui/operatorsmodel.cpp:366
1029 msgctxt "QCoreApplication|"
1030 msgid "Applies a function to every element in a list"
1031 msgstr "Aplica unha función a cada elemento da lista"
1032
1033 #: analitzagui/operatorsmodel.cpp:369
1034 msgctxt "QCoreApplication|"
1035 msgid "Removes all elements that don't fit a condition"
1036 msgstr "Retira todos os elementos que non cumpran unha condición"
1037
1038 #: analitzagui/operatorsmodel.cpp:372
1039 msgctxt "QCoreApplication|"
1040 msgid "Transpose"
1041 msgstr "Traspor"
1042
1043 #: analitzagui/operatorsmodel.cpp:572
1044 #, qt-format
1045 msgctxt "n-ary function prototype|"
1046 msgid "<em>%1</em>(..., <b>par%2</b>, ...)"
1047 msgstr "<em>%1</em>(…, <b>par%2</b>, …)"
1048
1049 #: analitzagui/operatorsmodel.cpp:582
1050 #, qt-format
1051 msgctxt "Function name in function prototype|"
1052 msgid "<em>%1</em>("
1053 msgstr "<em>%1</em>("
1054
1055 #: analitzagui/operatorsmodel.cpp:583
1056 #, qt-format
1057 msgctxt "Uncorrect function name in function prototype|"
1058 msgid "<em style='color:red'><b>%1</b></em>("
1059 msgstr "<em style='color:red'><b>%1</b></em>("
1060
1061 #: analitzagui/operatorsmodel.cpp:586
1062 #, qt-format
1063 msgctxt "Parameter in function prototype|"
1064 msgid "par%1"
1065 msgstr "par%1"
1066
1067 #: analitzagui/operatorsmodel.cpp:589 analitzagui/operatorsmodel.cpp:599
1068 #, qt-format
1069 msgctxt "Current parameter in function prototype|"
1070 msgid "<b>%1</b>"
1071 msgstr "<b>%1</b>"
1072
1073 #: analitzagui/operatorsmodel.cpp:592
1074 msgctxt "Function parameter separator|"
1075 msgid ", "
1076 msgstr ", "
1077
1078 #: analitzagui/operatorsmodel.cpp:596
1079 msgctxt "Current parameter is the bounding|"
1080 msgid " : bounds"
1081 msgstr " : límites"
1082
1083 #: analitzagui/variablesmodel.cpp:94
1084 msgctxt "@title:column|"
1085 msgid "Value"
1086 msgstr "Valor"
1087
1088 #: analitzaplot/plotsfactory.cpp:49
1089 msgctxt "QCoreApplication|"
1090 msgid "The expression is not correct"
1091 msgstr "A expresión non é correcta"
1092
1093 #: analitzaplot/plotsfactory.cpp:72
1094 #, qt-format
1095 msgctxt "QCoreApplication|"
1096 msgid "Function type '%1' not recognized"
1097 msgstr "Non se recoñece o tipo de función «%1»."
1098
1099 #: analitzaplot/plotsfactory.cpp:74
1100 #, qt-format
1101 msgctxt "QCoreApplication|"
1102 msgid "Function '%1' not recognized"
1103 msgstr "Non se recoñeceu a función «%1»"
1104
1105 #: analitzaplot/plotsmodel.cpp:79
1106 msgctxt "@title:column|"
1107 msgid "Plot"
1108 msgstr "Representar"
1109
1110 #: analitzaplot/plotter3d_es.cpp:534 declarative/graph2dmobile.cpp:141
1111 msgctxt "QObject|"
1112 msgid "PNG Image (*.png)"
1113 msgstr "Imaxe PNG (*.png)"
1114
1115 #: analitzaplot/plotter3d_es.cpp:534
1116 msgctxt "QObject|"
1117 msgid "PDF Document (*.pdf)"
1118 msgstr "Documento PDF (*.pdf)"
1119
1120 #: analitzaplot/plotter3d_es.cpp:534
1121 msgctxt "QObject|"
1122 msgid "X3D Document (*.x3d)"
1123 msgstr "Documento X3D (*.x3d)"
1124
1125 #: analitzaplot/plotter3d_es.cpp:534
1126 msgctxt "QObject|"
1127 msgid "STL Document (*.stl)"
1128 msgstr "Documento STL (*.stl)"
1129
1130 #: analitzaplot/private/backends/cartesiancurve.cpp:64
1131 msgctxt "Function type|"
1132 msgid "Plane Curve F(y)"
1133 msgstr "Curva de plano F(y)"
1134
1135 #: analitzaplot/private/backends/cartesiancurve.cpp:80
1136 msgctxt "Function type|"
1137 msgid "Plane Curve F(x)"
1138 msgstr "Curva de plano F(x)"
1139
1140 #: analitzaplot/private/backends/cartesiancurve.cpp:137
1141 #: analitzaplot/private/backends/cartesiancurve.cpp:245
1142 msgctxt "QCoreApplication|"
1143 msgid "We can only draw Real results."
1144 msgstr "Só se poden debuxar resultados reais."
1145
1146 #: analitzaplot/private/backends/cartesiancurve.cpp:248
1147 #: analitzawidgets/plotsview2d.cpp:236
1148 #, qt-format
1149 msgctxt "QCoreApplication|"
1150 msgid "x=%1 y=%2"
1151 msgstr "x=%1 y=%2"
1152
1153 #: analitzaplot/private/backends/cartesiansurface.cpp:52
1154 msgctxt "Function type|"
1155 msgid "Surface z=F(x,y)"
1156 msgstr "Superficie z=F(x,y)"
1157
1158 #: analitzaplot/private/backends/cartesiansurface.cpp:94
1159 msgctxt "Function type|"
1160 msgid "Surface y=F(x,z)"
1161 msgstr "Superficie y=F(x,z)"
1162
1163 #: analitzaplot/private/backends/cartesiansurface.cpp:127
1164 msgctxt "Function type|"
1165 msgid "Surface x=F(y,z)"
1166 msgstr "Superficie x=F(y,z)"
1167
1168 #: analitzaplot/private/backends/cylindricalsurface.cpp:37
1169 msgctxt "Function type|"
1170 msgid "Cylindrical Surface z=F(r: Radial, p: Polar)"
1171 msgstr "Superficie cilíndrica z=F(r: Radial, p: Polar)"
1172
1173 #: analitzaplot/private/backends/implicitcurve.cpp:44
1174 msgctxt "Function type|"
1175 msgid "Implicit Curve"
1176 msgstr "Curva implícita"
1177
1178 #: analitzaplot/private/backends/implicitpolarcurve.cpp:37
1179 msgctxt "Function type|"
1180 msgid "Polar implicit Curve 0=F(r: Radial, p: Polar)"
1181 msgstr "Curva polar implícita 0=F(r: Radial, p: Polar)"
1182
1183 #: analitzaplot/private/backends/implicitsurface.cpp:35
1184 msgctxt "Function type|"
1185 msgid "Implicit Surface"
1186 msgstr "Superficie implícita"
1187
1188 #: analitzaplot/private/backends/parametriccurve2d.cpp:37
1189 msgctxt "Function type|"
1190 msgid "Parametric Curve 2D"
1191 msgstr "Curva paramétrica 2D"
1192
1193 #: analitzaplot/private/backends/parametriccurve3d.cpp:31
1194 msgctxt "Function type|"
1195 msgid "Parametric Curve 3D"
1196 msgstr "Curva paramétrica 3D"
1197
1198 #: analitzaplot/private/backends/parametricsurface.cpp:32
1199 msgctxt "Function type|"
1200 msgid "Parametric Surface"
1201 msgstr "Superficie paramétrica"
1202
1203 #: analitzaplot/private/backends/polarcurve.cpp:37
1204 msgctxt "Function type|"
1205 msgid "Polar Curve r=F(p: Polar)"
1206 msgstr "Curva polar r=F(p: Polar)"
1207
1208 #: analitzaplot/private/backends/sphericalsurface.cpp:35
1209 msgctxt "Function type|"
1210 msgid "Spherical Surface Radial=F(t:Azimuth, p: Polar)"
1211 msgstr "Radial de superficie esférica=F(t:Acimut, p: Polar)"
1212
1213 #: analitzawidgets/expressionedit.cpp:295
1214 #, qt-format
1215 msgctxt "QCoreApplication|"
1216 msgid "Result: %1"
1217 msgstr "Resultado: %1"
1218
1219 #: analitzawidgets/expressionedit.cpp:405
1220 msgctxt "QCoreApplication|"
1221 msgid "To Expression"
1222 msgstr "A expresión"
1223
1224 #: analitzawidgets/expressionedit.cpp:407
1225 msgctxt "QCoreApplication|"
1226 msgid "To MathML"
1227 msgstr "A MathML"
1228
1229 #: analitzawidgets/expressionedit.cpp:409
1230 msgctxt "QCoreApplication|"
1231 msgid "Simplify"
1232 msgstr "Simplificar"
1233
1234 #: analitzawidgets/expressionedit.cpp:411
1235 msgctxt "QCoreApplication|"
1236 msgid "Examples"
1237 msgstr "Exemplos"
1238
1239 #: analitzawidgets/plotsview2d.cpp:214
1240 msgctxt "QCoreApplication|"
1241 msgid "Selected viewport too small"
1242 msgstr "A área de visualización é demasiado pequena"
1243
1244 #~ msgctxt "NAME OF TRANSLATORS"
1245 #~ msgid "Your names"
1246 #~ msgstr ""
1247 #~ "Marce Villarino,\n"
1248 #~ "Xosé Calvo"
1249
1250 #~ msgctxt "EMAIL OF TRANSLATORS"
1251 #~ msgid "Your emails"
1252 #~ msgstr ""
1253 #~ "mvillarino@users.sourceforge.net,\n"
1254 #~ "xosecalvo@gmail.com"
1255
1256 #~ msgctxt "Parameter in function prototype"
1257 #~ msgid "par%1"
1258 #~ msgstr "par%1"
1259
1260 #~ msgctxt "Function parameter separator"
1261 #~ msgid ", "
1262 #~ msgstr ", "
1263
1264 #, fuzzy
1265 #~| msgid "Hyperbolic secant"
1266 #~ msgctxt "dictionary"
1267 #~ msgid "Hiperbola"
1268 #~ msgstr "Secante hiperbólica"
1269
1270 #~ msgid "Function type not correct for functions depending on %1"
1271 #~ msgstr ""
1272 #~ "Este tipo de función non é correcta para as funcións que dependen de %1"
1273
1274 #~ msgctxt ""
1275 #~ "This function can't be represented as a curve. To draw implicit curve, "
1276 #~ "the function has to satisfy the implicit function theorem."
1277 #~ msgid "Implicit function undefined in the plane"
1278 #~ msgstr "Hai unha función implícita non definida no plano"
1279
1280 #~ msgid "center"
1281 #~ msgstr "centro"
1282
1283 #~ msgctxt "@title:column"
1284 #~ msgid "Function"
1285 #~ msgstr "Función"
1286
1287 #~ msgid "%1 function added"
1288 #~ msgstr "Engadiuse %1 función"
1289
1290 #~ msgid "Hide '%1'"
1291 #~ msgstr "Agochar «%1»"
1292
1293 #~ msgid "Show '%1'"
1294 #~ msgstr "Mostrar «%1»"
1295
1296 #~ msgid "Remove '%1'"
1297 #~ msgstr "Eliminar «%1»"
1298
1299 #~ msgctxt "Error message"
1300 #~ msgid "Unknown token %1"
1301 #~ msgstr "Descoñécese o token %1"