poqm/eu/analitza_qt.po

0001 # Translation for analitza_qt.po to Euskara/Basque (eu).
0002 # Copyright (C) 2021, This file is copyright:
0003 # This file is distributed under the same license as the original file.
0004 # KDE euskaratzeko proiektuko arduraduna <xalba@ni.eus>.
0005 #
0006 # Translators:
0007 # Iñigo Salvador Azurmendi <xalba@ni.eus>, 2021.
0008 msgid ""
0009 msgstr ""
0010 "Project-Id-Version: \n"
0011 "PO-Revision-Date: 2021-01-24 19:42+0100\n"
0012 "Last-Translator: Iñigo Salvador Azurmendi <xalba@ni.eus>\n"
0013 "Language-Team: Basque <kde-i18n-eu@kde.org>\n"
0014 "Language: eu\n"
0015 "MIME-Version: 1.0\n"
0016 "Content-Type: text/plain; charset=UTF-8\n"
0017 "Content-Transfer-Encoding: 8bit\n"
0018 "X-Qt-Contexts: true\n"
0019 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
0020 "X-Generator: Lokalize 20.12.1\n"
0021
0022 msgctxt "QObject|dictionary"
0023 msgid "xaxaxaxaxa"
0024 msgstr "xaxaxaxaxa"
0025
0026 msgctxt "QObject|dictionary"
0027 msgid "cosa"
0028 msgstr "cosa"
0029
0030 #: analitza/analyzer.cpp:193
0031 msgctxt "QCoreApplication|"
0032 msgid "Cannot calculate an empty expression"
0033 msgstr "Ezin da adierazpen huts bat kalkulatu"
0034
0035 #: analitza/analyzer.cpp:240 analitza/analyzer.cpp:259
0036 #: analitza/analyzer.cpp:285
0037 msgctxt "QCoreApplication|"
0038 msgid "Must specify a correct operation"
0039 msgstr "Eragiketa zuzen bat zehaztu behar da"
0040
0041 #: analitza/analyzer.cpp:255 analitza/analyzer.cpp:288
0042 #, qt-format
0043 msgctxt "QCoreApplication|"
0044 msgid "Unknown identifier: '%1'"
0045 msgstr "Identifikatzaile ezezaguna: «%1»"
0046
0047 #: analitza/analyzer.cpp:257 analitza/analyzer.cpp:290
0048 msgctxt "identifier separator in error message|"
0049 msgid "', '"
0050 msgstr "', '"
0051
0052 #: analitza/analyzer.cpp:615
0053 msgctxt "Error message, no proper condition found.|"
0054 msgid "Could not find a proper choice for a condition statement."
0055 msgstr "Ezin izan da baldintza deklarazio baterako aukera egokirik aurkitu."
0056
0057 #: analitza/analyzer.cpp:936
0058 msgctxt "QCoreApplication|"
0059 msgid "Type not supported for bounding."
0060 msgstr "Mota ez da mugatzeko onartzen."
0061
0062 #: analitza/analyzer.cpp:961
0063 msgctxt "QCoreApplication|"
0064 msgid "The downlimit is greater than the uplimit"
0065 msgstr "Beheko muga goiko muga baino handiagoa da"
0066
0067 #: analitza/analyzer.cpp:963
0068 msgctxt "QCoreApplication|"
0069 msgid "Incorrect uplimit or downlimit."
0070 msgstr "Goiko muga edo beheko muga okerra."
0071
0072 #: analitza/analyzer.cpp:1055 analitza/analyzer.cpp:1080
0073 #, qt-format
0074 msgctxt "QCoreApplication|"
0075 msgid "Invalid type for parameter '%1'"
0076 msgstr "«%1» parametrorako mota baliogabea"
0077
0078 #: analitza/analyzer.cpp:1877
0079 msgctxt "By a cycle i mean a variable that depends on itself|"
0080 msgid "Defined a variable cycle"
0081 msgstr "Ziklo aldakor bat definitu da"
0082
0083 #: analitza/analyzer.cpp:1919
0084 msgctxt "QCoreApplication|"
0085 msgid "The result is not a number"
0086 msgstr "Emaitza ez da zenbaki bat"
0087
0088 #: analitza/commands/blockmatrixcommands.cpp:44
0089 #: analitza/commands/blockmatrixcommands.cpp:234
0090 #: analitza/commands/listcommands.cpp:47 analitza/commands/listcommands.cpp:64
0091 #: analitza/commands/matrixcommands.cpp:48
0092 #: analitza/commands/matrixcommands.cpp:201
0093 #: analitza/commands/vectorcommands.cpp:45
0094 #: analitza/commands/vectorcommands.cpp:82
0095 #, qt-format
0096 msgctxt "QCoreApplication|"
0097 msgid "Invalid parameter count for '%1'"
0098 msgstr "«%1»(e)rako parametro kopuru baliogabea"
0099
0100 #: analitza/commands/blockmatrixcommands.cpp:86
0101 #: analitza/commands/blockmatrixcommands.cpp:119
0102 #: analitza/commands/blockmatrixcommands.cpp:122
0103 msgctxt "QCoreApplication|"
0104 msgid "Blocks must have consistent size between each and other"
0105 msgstr "Blokeek beraien artean neurri koherentea izan behar dute"
0106
0107 #: analitza/commands/blockmatrixcommands.cpp:90
0108 #: analitza/commands/blockmatrixcommands.cpp:126
0109 #: analitza/commands/blockmatrixcommands.cpp:263
0110 msgctxt "QCoreApplication|"
0111 msgid "Do not want empty blocks"
0112 msgstr "Ez da bloke hutsik nahi"
0113
0114 #: analitza/commands/blockmatrixcommands.cpp:93
0115 #: analitza/commands/blockmatrixcommands.cpp:130
0116 #: analitza/commands/blockmatrixcommands.cpp:209
0117 #: analitza/commands/blockmatrixcommands.cpp:267
0118 msgctxt "QCoreApplication|"
0119 msgid "Blocks must be matrices"
0120 msgstr "Blokeek matrizeak izan behar dute"
0121
0122 #: analitza/commands/blockmatrixcommands.cpp:142
0123 msgctxt "QCoreApplication|"
0124 msgid "Number of blocks must be consistent"
0125 msgstr "Blokeen kopurua koherentea izan behar du"
0126
0127 #: analitza/commands/blockmatrixcommands.cpp:145
0128 #: analitza/commands/blockmatrixcommands.cpp:211
0129 #: analitza/commands/matrixcommands.cpp:147
0130 msgctxt "QCoreApplication|"
0131 msgid "Do not want empty vectors/matrixrow elements"
0132 msgstr "Ez da bektore/matrize-errenkada elementu hutsik nahi"
0133
0134 #: analitza/commands/blockmatrixcommands.cpp:150
0135 #: analitza/commands/blockmatrixcommands.cpp:213
0136 #: analitza/commands/matrixcommands.cpp:149
0137 msgctxt "QCoreApplication|"
0138 msgid "Matrix constructor needs vectors or matrixrow elements"
0139 msgstr ""
0140 "Matrize eraikitzaileak bektore edo matrize-errenkada elementuak behar ditu"
0141
0142 #: analitza/commands/blockmatrixcommands.cpp:244
0143 #: analitza/commands/matrixcommands.cpp:288
0144 #, qt-format
0145 msgctxt "QCoreApplication|"
0146 msgid "the arg %1 is invalid or is error"
0147 msgstr "%1 argumentua baliogabea edo okerra da"
0148
0149 #: analitza/commands/eigencommands.cpp:39
0150 #, qt-format
0151 msgctxt "QCoreApplication|"
0152 msgid "Invalid parameter count for '%1'. Should have 1 parameter"
0153 msgstr "«%1»(e)rako parametro kopuru baliogabea. Parametro 1 izan beharko luke"
0154
0155 #: analitza/commands/eigencommands.cpp:47
0156 #, qt-format
0157 msgctxt "QCoreApplication|"
0158 msgid "To use '%1' command the input matrix must be square"
0159 msgstr "«%1» komandoa erabiltzeko, sarrerako matrizea karratua izan behar da"
0160
0161 #: analitza/commands/eigencommands.cpp:68
0162 #: analitza/commands/eigencommands.cpp:74
0163 #, qt-format
0164 msgctxt "QCoreApplication|"
0165 msgid ""
0166 "Invalid parameter type in matrix entry (%1,%2) for '%3', it must be a number "
0167 "value"
0168 msgstr ""
0169 "(%1,%2) matrize sarreran «%3»(r)ako parametro mota baliogabea, zenbakizko "
0170 "balio bat izan behar du"
0171
0172 #: analitza/commands/eigencommands.cpp:126
0173 #: analitza/commands/eigencommands.cpp:193
0174 msgctxt "QCoreApplication|NaN means Not a Number, is an invalid float number"
0175 msgid "Returned eigenvalue is NaN"
0176 msgstr "Itzulitako balio-propioa ez da zenbakia"
0177
0178 #: analitza/commands/eigencommands.cpp:132
0179 #: analitza/commands/eigencommands.cpp:196
0180 msgctxt "QCoreApplication|"
0181 msgid "Returned eigenvalue is too big"
0182 msgstr "Itzulitako balio-propioa handiegia da"
0183
0184 #: analitza/commands/matrixcommands.cpp:31
0185 msgctxt "QCoreApplication|"
0186 msgid "Matrix dimensions must be greater than zero"
0187 msgstr "Matrizearen dimentsioek zero baino handiagoa izan behar dute"
0188
0189 #: analitza/commands/matrixcommands.cpp:122 analitza/expression.cpp:296
0190 msgctxt "QCoreApplication|"
0191 msgid "All matrixrow elements must have the same size"
0192 msgstr "Matrize-errenkada elementu guztiek neurri bera izan behar dute"
0193
0194 #: analitza/commands/matrixcommands.cpp:127
0195 msgctxt "QCoreApplication|"
0196 msgid "Not all are rows or vectors"
0197 msgstr "Guztiak ez dira errenkadak edo bektoreak"
0198
0199 #: analitza/commands/matrixcommands.cpp:143
0200 msgctxt "QCoreApplication|"
0201 msgid "Every argument must be a matrixrow element"
0202 msgstr "Argumentu guztiek matrize-errenkada elementuak izan behar dute"
0203
0204 #: analitza/commands/matrixcommands.cpp:241
0205 msgctxt "QCoreApplication|"
0206 msgid "The nth diagonal index must be less than the row count"
0207 msgstr ""
0208 "Diagonaleko n. indizeak errenkada kopurua baino txikiagoa izan behar du"
0209
0210 #: analitza/commands/matrixcommands.cpp:249
0211 msgctxt "QCoreApplication|"
0212 msgid "The nth diagonal index must be less than the column count"
0213 msgstr "Diagonaleko n. indizeak zutabe kopurua baino txikiagoa izan behar du"
0214
0215 #: analitza/commands/matrixcommands.cpp:265
0216 msgctxt "QCoreApplication|"
0217 msgid "nth diagonal index must be integer number"
0218 msgstr "Diagonaleko n. indizeak zenbaki osoa izan behar du"
0219
0220 #: analitza/commands/matrixcommands.cpp:269
0221 msgctxt "QCoreApplication|"
0222 msgid "nth diagonal index must be a positive integer number"
0223 msgstr "Diagonaleko n. indizeak zenbaki osoa positiboa izan behar du"
0224
0225 #: analitza/commands/vectorcommands.cpp:62
0226 #, qt-format
0227 msgctxt "QCoreApplication|"
0228 msgid "Invalid parameter type for '%1', was expected a list"
0229 msgstr "«%1»(e)rako parametro mota baliogabea, zerrenda bat espero zen"
0230
0231 #: analitza/commands/vectorcommands.cpp:75
0232 #: analitza/commands/vectorcommands.cpp:78
0233 msgctxt "QCoreApplication|"
0234 msgid "Vector size must be some integer value greater to zero"
0235 msgstr "Bektorearen neurria zero baino handiagoa den balio osoa izan behar du"
0236
0237 #: analitza/explexer.cpp:78
0238 msgctxt "QCoreApplication|"
0239 msgid "Unexpectedly arrived to the end of the input"
0240 msgstr "Ustekabean sarrerakoaren amaierara iritsi da"
0241
0242 #: analitza/explexer.cpp:112
0243 #, qt-format
0244 msgctxt "QCoreApplication|"
0245 msgid "Unknown token %1"
0246 msgstr "%1 token ezezaguna"
0247
0248 #: analitza/expression.cpp:162
0249 #, qt-format
0250 msgctxt "QCoreApplication|"
0251 msgid "<em>%1</em> needs at least 2 parameters"
0252 msgstr "<em>%1</em>(e)k gutxienez 2 parametro behar ditu"
0253
0254 #: analitza/expression.cpp:164
0255 #, qt-format
0256 msgctxt "QCoreApplication|"
0257 msgid "<em>%1</em> requires %2 parameters"
0258 msgstr "<em>%1</em>(e)k %2 parametro behar ditu"
0259
0260 #: analitza/expression.cpp:171
0261 #, qt-format
0262 msgctxt "QCoreApplication|"
0263 msgid "Missing boundary for '%1'"
0264 msgstr "«%1»(e)rako muga falta da"
0265
0266 #: analitza/expression.cpp:173
0267 #, qt-format
0268 msgctxt "QCoreApplication|"
0269 msgid "Unexpected bounding for '%1'"
0270 msgstr "«%1»(e)rako ustekabeko muga"
0271
0272 #: analitza/expression.cpp:178
0273 #, qt-format
0274 msgctxt "QCoreApplication|"
0275 msgid "<em>%1</em> missing bounds on '%2'"
0276 msgstr "<em>%1</em> mugak falta ditu «%2»(e)an"
0277
0278 #: analitza/expression.cpp:200
0279 msgctxt "QCoreApplication|"
0280 msgid "Wrong declare"
0281 msgstr "Deklarazio okerra"
0282
0283 #: analitza/expression.cpp:210
0284 #, qt-format
0285 msgctxt "QCoreApplication|"
0286 msgid "Empty container: %1"
0287 msgstr "Edukitzaile hutsa: %1"
0288
0289 #: analitza/expression.cpp:228
0290 msgctxt "there was a conditional outside a condition structure|"
0291 msgid "We can only have conditionals inside piecewise structures."
0292 msgstr "Baldintzazkoak zatikako egituretan baino ezin ditugu izan."
0293
0294 #: analitza/expression.cpp:244
0295 #, qt-format
0296 msgctxt "QCoreApplication|"
0297 msgid "Cannot have two parameters with the same name like '%1'."
0298 msgstr "Ezin dira «%1» bezala izen bereko bi parametro izan."
0299
0300 #: analitza/expression.cpp:259
0301 msgctxt ""
0302 "this is an error message. otherwise is the else in a mathml condition|"
0303 msgid "The <em>otherwise</em> parameter should be the last one"
0304 msgstr "<em>otherwise</em> (bestela) parametroa azkena izan beharko luke"
0305
0306 #: analitza/expression.cpp:267
0307 #, qt-format
0308 msgctxt "there was an element that was not a conditional inside a condition|"
0309 msgid "%1 is not a proper condition inside the piecewise"
0310 msgstr "%1 ez da zatikakoaren barruko baldintza egokia"
0311
0312 #: analitza/expression.cpp:273
0313 msgctxt "QCoreApplication|"
0314 msgid "We can only declare variables"
0315 msgstr "Aldagaiak baino ezin ditugu deklaratu"
0316
0317 #: analitza/expression.cpp:279
0318 msgctxt "QCoreApplication|"
0319 msgid "We can only have bounded variables"
0320 msgstr "Mugadun aldagaiak baino ezin ditugu izan"
0321
0322 #: analitza/expression.cpp:290 analitza/expression.cpp:495
0323 msgctxt "QCoreApplication|"
0324 msgid "Do not want empty matrixrow elements"
0325 msgstr "Ez da matrize-errenkada elementu hutsik nahi"
0326
0327 #: analitza/expression.cpp:300
0328 msgctxt "QCoreApplication|"
0329 msgid "The matrix must contain only matrixrow elements"
0330 msgstr "Matrizeak, matrize-errenkada elementuak baino ez ditu izan behar"
0331
0332 #: analitza/expression.cpp:419
0333 #, qt-format
0334 msgctxt "QCoreApplication|"
0335 msgid "Error while parsing: %1"
0336 msgstr "Errorea sintaxi-azterketa egitean: %1"
0337
0338 #: analitza/expression.cpp:450
0339 #, qt-format
0340 msgctxt "An error message|"
0341 msgid "Container unknown: %1"
0342 msgstr "Edukitzaile ezezaguna: %1"
0343
0344 #: analitza/expression.cpp:456
0345 #, qt-format
0346 msgctxt "QCoreApplication|"
0347 msgid "Cannot codify the %1 value."
0348 msgstr "%1 balioa ezin da kodetu."
0349
0350 #: analitza/expression.cpp:462
0351 #, qt-format
0352 msgctxt "QCoreApplication|"
0353 msgid "The %1 operator cannot have child contexts."
0354 msgstr "%1 eragileak ezin du haur testuingururik izan."
0355
0356 #: analitza/expression.cpp:466
0357 #, qt-format
0358 msgctxt "QCoreApplication|"
0359 msgid "The element '%1' is not an operator."
0360 msgstr "«%1» elementua ez da eragile bat."
0361
0362 #: analitza/expression.cpp:479
0363 msgctxt "QCoreApplication|"
0364 msgid "Do not want empty vectors"
0365 msgstr "Ez da bektore hutsik nahi"
0366
0367 #: analitza/expression.cpp:489
0368 msgctxt "QCoreApplication|"
0369 msgid "Do not want empty matrices"
0370 msgstr "Ez da matrize hutsik nahi"
0371
0372 #: analitza/expression.cpp:508
0373 #, qt-format
0374 msgctxt "Error message due to an unrecognized input|"
0375 msgid "Not supported/unknown: %1"
0376 msgstr "Ez onartua/ezezaguna: %1"
0377
0378 #: analitza/expressionparser.cpp:296
0379 msgctxt "QCoreApplication|"
0380 msgid ", "
0381 msgstr ", "
0382
0383 #: analitza/expressionparser.cpp:296
0384 #, qt-format
0385 msgctxt "error message|"
0386 msgid "Expected %1 instead of '%2'"
0387 msgstr "%1 espero zen «%2»(r)en ordez"
0388
0389 #: analitza/expressionparser.cpp:298
0390 msgctxt "QCoreApplication|"
0391 msgid "Missing right parenthesis"
0392 msgstr "Eskuineko parentesia falta du"
0393
0394 #: analitza/expressionparser.cpp:300
0395 msgctxt "QCoreApplication|"
0396 msgid "Unbalanced right parenthesis"
0397 msgstr "Orekatu gabeko eskuin parentesia"
0398
0399 #: analitza/expressionparser.cpp:303
0400 #, qt-format
0401 msgctxt "QCoreApplication|"
0402 msgid "Unexpected token identifier: %1"
0403 msgstr "Ustekabeko token identifikatzailea: %1"
0404
0405 #: analitza/expressionparser.cpp:305
0406 #, qt-format
0407 msgctxt "QCoreApplication|"
0408 msgid "Unexpected token %1"
0409 msgstr "Ustekabeko %1 tokena"
0410
0411 #: analitza/expressiontypechecker.cpp:301
0412 #, qt-format
0413 msgctxt "QCoreApplication|"
0414 msgid "Could not find a type that unifies '%1'"
0415 msgstr "Ezin izan da aurkitu «%1» bateratzen duen motarik"
0416
0417 #: analitza/expressiontypechecker.cpp:473
0418 msgctxt "QCoreApplication|"
0419 msgid "The domain should be either a vector or a list"
0420 msgstr "Domeinua bektore bat edo zerrenda bat izan beharko litzateke"
0421
0422 #: analitza/expressiontypechecker.cpp:558
0423 #, qt-format
0424 msgctxt "type error message|"
0425 msgid "Cannot call '%1'"
0426 msgstr "Ezin zaio «%1»(e)ri deitu"
0427
0428 #: analitza/expressiontypechecker.cpp:593
0429 #, qt-format
0430 msgctxt "QCoreApplication|"
0431 msgid "Cannot reduce '%1' to '%2'. Invalid type of parameter '%3' for '%4'"
0432 msgstr ""
0433 "«%1» ezin da «%2»(r)a txikiagotu. «%3» «%4»(r)ako parametro mota baliogabea "
0434 "da"
0435
0436 #: analitza/expressiontypechecker.cpp:604
0437 #, qt-format
0438 msgctxt "QCoreApplication|"
0439 msgid "Invalid parameter count for '%2'. Should have %1 parameters."
0440 msgstr ""
0441 "«%2»(e)rako parametro kopuru baliogabea. %1 parametro izan beharko lituzke."
0442
0443 #: analitza/expressiontypechecker.cpp:616
0444 #, qt-format
0445 msgctxt "QCoreApplication|"
0446 msgid "Cannot compare '%1' to '%2'. Invalid type of parameter '%3' for '%4'"
0447 msgstr ""
0448 "«%1» ezin da «%2»(r)ekin parekatu. «%3» «%4»(r)ako parametro mota baliogabea "
0449 "da"
0450
0451 #: analitza/expressiontypechecker.cpp:654
0452 #, qt-format
0453 msgctxt "QCoreApplication|"
0454 msgid "Could not call '%1'"
0455 msgstr "Ezin izan zaio «%1»(e)ri deitu"
0456
0457 #: analitza/expressiontypechecker.cpp:662
0458 #, qt-format
0459 msgctxt "QCoreApplication|"
0460 msgid "Could not solve '%1'"
0461 msgstr "Ezin da «%1» ebatzi"
0462
0463 #: analitza/expressiontypechecker.cpp:695
0464 #, qt-format
0465 msgctxt "QCoreApplication|"
0466 msgid "Incoherent type for the variable '%1'"
0467 msgstr "«%1» aldagairako mota ez koherentea"
0468
0469 #: analitza/expressiontypechecker.cpp:718
0470 msgctxt "QCoreApplication|"
0471 msgid "Could not determine the type for piecewise"
0472 msgstr "Ezin izan da zatikakoaren mota zehaztu"
0473
0474 #: analitza/expressiontypechecker.cpp:937
0475 msgctxt "QCoreApplication|"
0476 msgid "Unexpected type"
0477 msgstr "Ustekabeko mota"
0478
0479 #: analitza/expressiontypechecker.cpp:960
0480 #, qt-format
0481 msgctxt "QCoreApplication|"
0482 msgid "Cannot convert '%1' to '%2'"
0483 msgstr "Ezin da «%1» -> «%2» bihurtu"
0484
0485 #: analitza/htmlexpressionwriter.cpp:54 analitza/htmlexpressionwriter.cpp:55
0486 #, qt-format
0487 msgctxt "html representation of an operator|"
0488 msgid "<span class='op'>%1</span>"
0489 msgstr "<span class='op'>%1</span>"
0490
0491 #: analitza/htmlexpressionwriter.cpp:56
0492 #, qt-format
0493 msgctxt "html representation of an operator|"
0494 msgid "<span class='keyword'>%1</span>"
0495 msgstr "<span class='keyword'>%1</span>"
0496
0497 #: analitza/mathmlpresentationlexer.cpp:94
0498 #, qt-format
0499 msgctxt "Error message|"
0500 msgid "Unknown token '%1'"
0501 msgstr "«%1» token ezezaguna"
0502
0503 #: analitza/operations.cpp:54 analitza/operations.cpp:191
0504 msgctxt "QCoreApplication|"
0505 msgid "Cannot divide by 0."
0506 msgstr "Ezin da «0»rekin zatitu."
0507
0508 #: analitza/operations.cpp:72 analitza/operations.cpp:203
0509 msgctxt "QCoreApplication|"
0510 msgid "Cannot calculate the remainder on 0."
0511 msgstr "Ezin da «0»ren hondarra kalkulatu."
0512
0513 #: analitza/operations.cpp:84 analitza/operations.cpp:213
0514 msgctxt "QCoreApplication|"
0515 msgid "Cannot calculate the factor on 0."
0516 msgstr "Ezin da «0»ren faktorea kalkulatu."
0517
0518 #: analitza/operations.cpp:140 analitza/operations.cpp:261
0519 msgctxt "QCoreApplication|"
0520 msgid "Cannot calculate the lcm of 0."
0521 msgstr "Ezin da «0»ren mkt (multiplo komunetako txikiena) kalkulatu."
0522
0523 #: analitza/operations.cpp:246
0524 msgctxt "QCoreApplication|"
0525 msgid "Boolean operations on complex numbers not available"
0526 msgstr "Eragiketa boolearrak ez daude erabilgarri zenbaki konplexuetarako"
0527
0528 #: analitza/operations.cpp:276
0529 msgctxt "QCoreApplication|"
0530 msgid "Only square root implemented for complex numbers"
0531 msgstr "Erro karratua zenbaki konplexuetarako, bakarrik, inplementatu da"
0532
0533 #: analitza/operations.cpp:351 analitza/operations.cpp:463
0534 #, qt-format
0535 msgctxt "QCoreApplication|"
0536 msgid "Could not calculate a value %1"
0537 msgstr "Ezin izan da %1 balio bat kalkulatu"
0538
0539 #: analitza/operations.cpp:479
0540 #, qt-format
0541 msgctxt "QCoreApplication|"
0542 msgid "Cannot calculate %1 between a value and an error type"
0543 msgstr "Ezin da balio baten eta errore mota baten artean %1 kalkulatu"
0544
0545 #: analitza/operations.cpp:495 analitza/operations.cpp:652
0546 #: analitza/operations.cpp:784
0547 msgctxt "QCoreApplication|"
0548 msgid "Invalid index for a container"
0549 msgstr "Edukitzaile batentzako indize baliogabea"
0550
0551 #: analitza/operations.cpp:527
0552 #, qt-format
0553 msgctxt "QCoreApplication|"
0554 msgid "Cannot operate '%1' on different sized vectors."
0555 msgstr "Ezin da neurri ezberdineko bektoreetan «%1» eragin."
0556
0557 #: analitza/operations.cpp:566
0558 msgctxt "QCoreApplication|"
0559 msgid ""
0560 "Multiplication between a matrix and a vector is allowed provided that the "
0561 "number of columns of the matrix equals the size of the vector"
0562 msgstr ""
0563 "Matrize baten eta bektore baten arteko biderketa onartzen da, matrizearen "
0564 "zutabe kopurua bektorearen neurriaren berdina denean"
0565
0566 #: analitza/operations.cpp:570 analitza/operations.cpp:707
0567 msgctxt "QCoreApplication|"
0568 msgid "Matrix and vector entries must be numbers"
0569 msgstr "Matrizearen eta bektorearen sarrerek zenbakiak izan behar dute"
0570
0571 #: analitza/operations.cpp:599
0572 #, qt-format
0573 msgctxt "QCoreApplication|"
0574 msgid "Could not calculate a vector's %1"
0575 msgstr "Ezin izan da bektore baten %1 kalkulatu"
0576
0577 #: analitza/operations.cpp:621 analitza/operations.cpp:637
0578 #, qt-format
0579 msgctxt "QCoreApplication|"
0580 msgid "Could not calculate a list's %1"
0581 msgstr "Ezin izan da zerrenda bateko %1 kalkulatu"
0582
0583 #: analitza/operations.cpp:703
0584 msgctxt "QCoreApplication|"
0585 msgid ""
0586 "Multiplication between a vector and a matrix is allowed provided that the "
0587 "matrix has only one matrixrow element"
0588 msgstr ""
0589 "Matrize baten eta bektore baten arteko biderketa onartzen da, matrizeak "
0590 "matrize-errenkada elementu bakarra duenean"
0591
0592 #: analitza/operations.cpp:730
0593 msgctxt "QCoreApplication|"
0594 msgid ""
0595 "Addition of two matrices is allowed provided that both matrices have the "
0596 "same number of rows and the same number of columns"
0597 msgstr ""
0598 "Bi matrizeen arteko batuketa onartzen da, biek errenkada eta zutabe kopuru "
0599 "bera dutenean"
0600
0601 #: analitza/operations.cpp:762
0602 msgctxt "QCoreApplication|"
0603 msgid ""
0604 "Multiplication of two matrices is allowed provided that the number of "
0605 "columns of the first matrix equals the number of rows of the second matrix"
0606 msgstr ""
0607 "Bi matrizeen arteko biderketa onartzen da, lehenengoaren zutabe kopurua "
0608 "bigarrenaren errenkada kopuruarekin bat datorrenean"
0609
0610 #: analitza/operations.cpp:766 analitza/operations.cpp:804
0611 #: analitza/operations.cpp:887
0612 msgctxt "QCoreApplication|"
0613 msgid "Matrix entries must be numbers"
0614 msgstr "Matrizearen sarrerek zenbakiak izan behar dute"
0615
0616 #: analitza/operations.cpp:879
0617 msgctxt "QCoreApplication|"
0618 msgid "The exponent of 'power' must be some integer number"
0619 msgstr "«Berreturaren» berretzaileak zenbaki osoa izan behar du"
0620
0621 #: analitza/operations.cpp:883
0622 msgctxt "QCoreApplication|"
0623 msgid "Cannot compute 'power' for non square matrix"
0624 msgstr "Ezin da «berretura» konputatu karratuak ez diren matrizeetarako"
0625
0626 #: analitza/operations.cpp:922
0627 #, qt-format
0628 msgctxt "QCoreApplication|"
0629 msgid "Cannot calculate %1 between a matrix and an error type"
0630 msgstr "Ezin da matrize baten eta errore mota baten artean %1 kalkulatu"
0631
0632 #: analitza/providederivative.cpp:93
0633 #, qt-format
0634 msgctxt "QCoreApplication|"
0635 msgid "Could not calculate the derivative for '%1'"
0636 msgstr "Ezin izan da «%1»(r)en deribatua kalkulatu"
0637
0638 #: analitzagui/operatorsmodel.cpp:95 analitzagui/variablesmodel.cpp:91
0639 #: analitzaplot/plotsdictionarymodel.cpp:36 analitzaplot/plotsmodel.cpp:78
0640 msgctxt "@title:column|"
0641 msgid "Name"
0642 msgstr "Izena"
0643
0644 #: analitzagui/operatorsmodel.cpp:98
0645 msgctxt "@title:column|"
0646 msgid "Description"
0647 msgstr "Deskribapena"
0648
0649 #: analitzagui/operatorsmodel.cpp:101
0650 msgctxt "@title:column|"
0651 msgid "Parameters"
0652 msgstr "Parametroak"
0653
0654 #: analitzagui/operatorsmodel.cpp:104
0655 msgctxt "@title:column|"
0656 msgid "Example"
0657 msgstr "Adibidea"
0658
0659 #: analitzagui/operatorsmodel.cpp:135
0660 msgctxt "Syntax for function bounding|"
0661 msgid " : var"
0662 msgstr " : aldg"
0663
0664 #: analitzagui/operatorsmodel.cpp:137
0665 msgctxt "Syntax for function bounding values|"
0666 msgid "=from..to"
0667 msgstr "=nondik..nora"
0668
0669 #: analitzagui/operatorsmodel.cpp:140
0670 #, qt-format
0671 msgctxt "QCoreApplication|"
0672 msgid "%1("
0673 msgstr "%1("
0674
0675 #: analitzagui/operatorsmodel.cpp:143
0676 #, qt-format
0677 msgctxt "QCoreApplication|"
0678 msgid "%1... parameters, ...%2)"
0679 msgstr "%1... parametro, ...%2)"
0680
0681 #: analitzagui/operatorsmodel.cpp:146
0682 #, qt-format
0683 msgctxt "QCoreApplication|"
0684 msgid "par%1"
0685 msgstr "par%1"
0686
0687 #: analitzagui/operatorsmodel.cpp:159
0688 msgctxt "QCoreApplication|"
0689 msgid "Addition"
0690 msgstr "Batuketa"
0691
0692 #: analitzagui/operatorsmodel.cpp:162
0693 msgctxt "QCoreApplication|"
0694 msgid "Multiplication"
0695 msgstr "Biderketa"
0696
0697 #: analitzagui/operatorsmodel.cpp:165
0698 msgctxt "QCoreApplication|"
0699 msgid "Division"
0700 msgstr "Zatiketa"
0701
0702 #: analitzagui/operatorsmodel.cpp:168
0703 msgctxt "QCoreApplication|"
0704 msgid "Subtraction. Will remove all values from the first one."
0705 msgstr "Kenketa. Lehengotik balio guztiak kenduko ditu."
0706
0707 #: analitzagui/operatorsmodel.cpp:171
0708 msgctxt "QCoreApplication|"
0709 msgid "Power"
0710 msgstr "Berretura"
0711
0712 #: analitzagui/operatorsmodel.cpp:174
0713 msgctxt "QCoreApplication|"
0714 msgid "Remainder"
0715 msgstr "Hondarra"
0716
0717 #: analitzagui/operatorsmodel.cpp:177
0718 msgctxt "QCoreApplication|"
0719 msgid "Quotient"
0720 msgstr "Zatidura"
0721
0722 #: analitzagui/operatorsmodel.cpp:180
0723 msgctxt "QCoreApplication|"
0724 msgid "The factor of"
0725 msgstr "Ondokoaren faktorea, "
0726
0727 #: analitzagui/operatorsmodel.cpp:183
0728 msgctxt "QCoreApplication|"
0729 msgid "Factorial. factorial(n)=n!"
0730 msgstr "Faktoriala. faktoriala(n)=n!"
0731
0732 #: analitzagui/operatorsmodel.cpp:186
0733 msgctxt "QCoreApplication|"
0734 msgid "Function to calculate the sine of a given angle"
0735 msgstr "Emandako angelu baten sinua kalkulatzeko funtzioa"
0736
0737 #: analitzagui/operatorsmodel.cpp:189
0738 msgctxt "QCoreApplication|"
0739 msgid "Function to calculate the cosine of a given angle"
0740 msgstr "Emandako angelu baten kosinua kalkulatzeko funtzioa"
0741
0742 #: analitzagui/operatorsmodel.cpp:192
0743 msgctxt "QCoreApplication|"
0744 msgid "Function to calculate the tangent of a given angle"
0745 msgstr "Emandako angelu baten tangentea kalkulatzeko funtziao"
0746
0747 #: analitzagui/operatorsmodel.cpp:195
0748 msgctxt "QCoreApplication|"
0749 msgid "Secant"
0750 msgstr "Sekantea"
0751
0752 #: analitzagui/operatorsmodel.cpp:198
0753 msgctxt "QCoreApplication|"
0754 msgid "Cosecant"
0755 msgstr "Kosekantea"
0756
0757 #: analitzagui/operatorsmodel.cpp:201
0758 msgctxt "QCoreApplication|"
0759 msgid "Cotangent"
0760 msgstr "Kotangentea"
0761
0762 #: analitzagui/operatorsmodel.cpp:204
0763 msgctxt "QCoreApplication|"
0764 msgid "Hyperbolic sine"
0765 msgstr "Sinu hiperbolikoa"
0766
0767 #: analitzagui/operatorsmodel.cpp:207
0768 msgctxt "QCoreApplication|"
0769 msgid "Hyperbolic cosine"
0770 msgstr "Kosinu hiperbolikoa"
0771
0772 #: analitzagui/operatorsmodel.cpp:210
0773 msgctxt "QCoreApplication|"
0774 msgid "Hyperbolic tangent"
0775 msgstr "Tangente hiperbolikoa"
0776
0777 #: analitzagui/operatorsmodel.cpp:213
0778 msgctxt "QCoreApplication|"
0779 msgid "Hyperbolic secant"
0780 msgstr "Sekante hiperbolikoa"
0781
0782 #: analitzagui/operatorsmodel.cpp:216
0783 msgctxt "QCoreApplication|"
0784 msgid "Hyperbolic cosecant"
0785 msgstr "Kosekante hiperbolikoa"
0786
0787 #: analitzagui/operatorsmodel.cpp:219
0788 msgctxt "QCoreApplication|"
0789 msgid "Hyperbolic cotangent"
0790 msgstr "Kotangente hiperbolikoa"
0791
0792 #: analitzagui/operatorsmodel.cpp:222
0793 msgctxt "QCoreApplication|"
0794 msgid "Arc sine"
0795 msgstr "Arku sinua"
0796
0797 #: analitzagui/operatorsmodel.cpp:225
0798 msgctxt "QCoreApplication|"
0799 msgid "Arc cosine"
0800 msgstr "Arku kosinua"
0801
0802 #: analitzagui/operatorsmodel.cpp:228
0803 msgctxt "QCoreApplication|"
0804 msgid "Arc tangent"
0805 msgstr "Arku tangentea"
0806
0807 #: analitzagui/operatorsmodel.cpp:231
0808 msgctxt "QCoreApplication|"
0809 msgid "Arc cotangent"
0810 msgstr "Arku kotangentea"
0811
0812 #: analitzagui/operatorsmodel.cpp:237
0813 msgctxt "QCoreApplication|"
0814 msgid "Hyperbolic arc tangent"
0815 msgstr "Arku tangente hiperbolikoa"
0816
0817 #: analitzagui/operatorsmodel.cpp:240
0818 msgctxt "QCoreApplication|"
0819 msgid "Summatory"
0820 msgstr "Batukaria"
0821
0822 #: analitzagui/operatorsmodel.cpp:243
0823 msgctxt "QCoreApplication|"
0824 msgid "Productory"
0825 msgstr "Biderkaria"
0826
0827 #: analitzagui/operatorsmodel.cpp:246
0828 msgctxt "QCoreApplication|"
0829 msgid "For all"
0830 msgstr "Guztietarako"
0831
0832 #: analitzagui/operatorsmodel.cpp:249
0833 msgctxt "QCoreApplication|"
0834 msgid "Exists"
0835 msgstr "Badago"
0836
0837 #: analitzagui/operatorsmodel.cpp:252
0838 msgctxt "QCoreApplication|"
0839 msgid "Differentiation"
0840 msgstr "Diferentziazioa"
0841
0842 #: analitzagui/operatorsmodel.cpp:255
0843 msgctxt "QCoreApplication|"
0844 msgid "Hyperbolic arc sine"
0845 msgstr "Arku sinu hiperbolikoa"
0846
0847 #: analitzagui/operatorsmodel.cpp:258
0848 msgctxt "QCoreApplication|"
0849 msgid "Hyperbolic arc cosine"
0850 msgstr "Arku kosinu hiperbolikoa"
0851
0852 #: analitzagui/operatorsmodel.cpp:261
0853 msgctxt "QCoreApplication|"
0854 msgid "Arc cosecant"
0855 msgstr "Arku kosekantea"
0856
0857 #: analitzagui/operatorsmodel.cpp:264
0858 msgctxt "QCoreApplication|"
0859 msgid "Hyperbolic arc cosecant"
0860 msgstr "Arku kosekante hiperbolikoa"
0861
0862 #: analitzagui/operatorsmodel.cpp:267
0863 msgctxt "QCoreApplication|"
0864 msgid "Arc secant"
0865 msgstr "Arku sekantea"
0866
0867 #: analitzagui/operatorsmodel.cpp:270
0868 msgctxt "QCoreApplication|"
0869 msgid "Hyperbolic arc secant"
0870 msgstr "Arku sekante hiperbolikoa"
0871
0872 #: analitzagui/operatorsmodel.cpp:273
0873 msgctxt "QCoreApplication|"
0874 msgid "Exponent (e^x)"
0875 msgstr "Berretzailea (e^x)"
0876
0877 #: analitzagui/operatorsmodel.cpp:276
0878 msgctxt "QCoreApplication|"
0879 msgid "Base-e logarithm"
0880 msgstr "e oinarriko logaritmoa"
0881
0882 #: analitzagui/operatorsmodel.cpp:279
0883 msgctxt "QCoreApplication|"
0884 msgid "Base-10 logarithm"
0885 msgstr "10 oinarriko logaritmoa"
0886
0887 #: analitzagui/operatorsmodel.cpp:282
0888 msgctxt "QCoreApplication|"
0889 msgid "Absolute value. abs(n)=|n|"
0890 msgstr "Balio absolutua. abs(n)=|n|"
0891
0892 #: analitzagui/operatorsmodel.cpp:285
0893 msgctxt "QCoreApplication|"
0894 msgid "Conjugate"
0895 msgstr "Konjugatu"
0896
0897 #: analitzagui/operatorsmodel.cpp:288
0898 msgctxt "QCoreApplication|"
0899 msgid "Arg"
0900 msgstr "Arg"
0901
0902 #: analitzagui/operatorsmodel.cpp:291
0903 msgctxt "QCoreApplication|"
0904 msgid "Real"
0905 msgstr "Erreala"
0906
0907 #: analitzagui/operatorsmodel.cpp:294
0908 msgctxt "QCoreApplication|"
0909 msgid "Imaginary"
0910 msgstr "Irudikaria"
0911
0912 #: analitzagui/operatorsmodel.cpp:297
0913 msgctxt "QCoreApplication|"
0914 msgid "Floor value. floor(n)=⌊n⌋"
0915 msgstr "Zoru balioa. floor(n)=⌊n⌋"
0916
0917 #: analitzagui/operatorsmodel.cpp:300
0918 msgctxt "QCoreApplication|"
0919 msgid "Ceil value. ceil(n)=⌈n⌉"
0920 msgstr "Sabai balioa. ceil(n)=⌈n⌉"
0921
0922 #: analitzagui/operatorsmodel.cpp:303
0923 msgctxt "QCoreApplication|"
0924 msgid "Minimum"
0925 msgstr "Minimoa"
0926
0927 #: analitzagui/operatorsmodel.cpp:306
0928 msgctxt "QCoreApplication|"
0929 msgid "Maximum"
0930 msgstr "Maximoa"
0931
0932 #: analitzagui/operatorsmodel.cpp:309
0933 msgctxt "QCoreApplication|"
0934 msgid "Greater than. gt(a,b)=a>b"
0935 msgstr "Handiagoa baino. gt(a,b)=a>b"
0936
0937 #: analitzagui/operatorsmodel.cpp:312
0938 msgctxt "QCoreApplication|"
0939 msgid "Less than. lt(a,b)=a<b"
0940 msgstr "Txikiagoa baino. lt(a,b)=a<b"
0941
0942 #: analitzagui/operatorsmodel.cpp:315
0943 msgctxt "QCoreApplication|"
0944 msgid "Equal. eq(a,b) = a=b"
0945 msgstr "Berdina. eq(a,b) = a=b"
0946
0947 #: analitzagui/operatorsmodel.cpp:318
0948 msgctxt "QCoreApplication|"
0949 msgid "Approximation. approx(a)=a±n"
0950 msgstr "Hurbilketa. approx(a)=a±n"
0951
0952 #: analitzagui/operatorsmodel.cpp:321
0953 msgctxt "QCoreApplication|"
0954 msgid "Not equal. neq(a,b)=a≠b"
0955 msgstr "Ezberdina. neq(a,b)=a≠b"
0956
0957 #: analitzagui/operatorsmodel.cpp:324
0958 msgctxt "QCoreApplication|"
0959 msgid "Greater or equal. geq(a,b)=a≥b"
0960 msgstr "Handiagoa edo berdina. geq(a,b)=a≥b"
0961
0962 #: analitzagui/operatorsmodel.cpp:327
0963 msgctxt "QCoreApplication|"
0964 msgid "Less or equal. leq(a,b)=a≤b"
0965 msgstr "Txikiagoa edo berdina. leq(a,b)=a≤b"
0966
0967 #: analitzagui/operatorsmodel.cpp:330
0968 msgctxt "QCoreApplication|"
0969 msgid "Boolean and"
0970 msgstr "eta boolearra"
0971
0972 #: analitzagui/operatorsmodel.cpp:333
0973 msgctxt "QCoreApplication|"
0974 msgid "Boolean not"
0975 msgstr "ez boolearra"
0976
0977 #: analitzagui/operatorsmodel.cpp:336
0978 msgctxt "QCoreApplication|"
0979 msgid "Boolean or"
0980 msgstr "edo boolearra"
0981
0982 #: analitzagui/operatorsmodel.cpp:339
0983 msgctxt "QCoreApplication|"
0984 msgid "Boolean xor"
0985 msgstr "xedo boolearra"
0986
0987 #: analitzagui/operatorsmodel.cpp:342
0988 msgctxt "QCoreApplication|"
0989 msgid "Boolean implication"
0990 msgstr "Inplikazio boolearra"
0991
0992 #: analitzagui/operatorsmodel.cpp:345
0993 msgctxt "QCoreApplication|"
0994 msgid "Greatest common divisor"
0995 msgstr "Zatitzaile komunetako handiena"
0996
0997 #: analitzagui/operatorsmodel.cpp:348
0998 msgctxt "QCoreApplication|"
0999 msgid "Least common multiple"
1000 msgstr "Multiplo komunetako txikiena"
1001
1002 #: analitzagui/operatorsmodel.cpp:351
1003 msgctxt "QCoreApplication|"
1004 msgid "Root"
1005 msgstr "Erroa"
1006
1007 #: analitzagui/operatorsmodel.cpp:354
1008 msgctxt "QCoreApplication|"
1009 msgid "Cardinal"
1010 msgstr "Kardinala"
1011
1012 #: analitzagui/operatorsmodel.cpp:357
1013 msgctxt "QCoreApplication|"
1014 msgid "Scalar product"
1015 msgstr "Biderkadura eskalarra"
1016
1017 #: analitzagui/operatorsmodel.cpp:360
1018 msgctxt "QCoreApplication|"
1019 msgid "Select the par1-th element of par2 list or vector"
1020 msgstr "Hautatu par2 bektore-zerrenda bateko par1. elementua"
1021
1022 #: analitzagui/operatorsmodel.cpp:363
1023 msgctxt "QCoreApplication|"
1024 msgid "Joins several items of the same type"
1025 msgstr "Mota bereko hainbat elementu elkartzen ditu"
1026
1027 #: analitzagui/operatorsmodel.cpp:366
1028 msgctxt "QCoreApplication|"
1029 msgid "Applies a function to every element in a list"
1030 msgstr "Zerrenda bateko elementu bakoitzari funtzio bat aplikatzen dio"
1031
1032 #: analitzagui/operatorsmodel.cpp:369
1033 msgctxt "QCoreApplication|"
1034 msgid "Removes all elements that don't fit a condition"
1035 msgstr "Baldintza batera egokitzen ez diren elementu guztiak kentzen ditu"
1036
1037 #: analitzagui/operatorsmodel.cpp:372
1038 msgctxt "QCoreApplication|"
1039 msgid "Transpose"
1040 msgstr "Transposizioa egin"
1041
1042 #: analitzagui/operatorsmodel.cpp:572
1043 #, qt-format
1044 msgctxt "n-ary function prototype|"
1045 msgid "<em>%1</em>(..., <b>par%2</b>, ...)"
1046 msgstr "<em>%1</em>(..., <b>par%2</b>, ...)"
1047
1048 #: analitzagui/operatorsmodel.cpp:582
1049 #, qt-format
1050 msgctxt "Function name in function prototype|"
1051 msgid "<em>%1</em>("
1052 msgstr "<em>%1</em>("
1053
1054 #: analitzagui/operatorsmodel.cpp:583
1055 #, qt-format
1056 msgctxt "Uncorrect function name in function prototype|"
1057 msgid "<em style='color:red'><b>%1</b></em>("
1058 msgstr "<em style='color:red'><b>%1</b></em>("
1059
1060 #: analitzagui/operatorsmodel.cpp:586
1061 #, qt-format
1062 msgctxt "Parameter in function prototype|"
1063 msgid "par%1"
1064 msgstr "par%1"
1065
1066 #: analitzagui/operatorsmodel.cpp:589 analitzagui/operatorsmodel.cpp:599
1067 #, qt-format
1068 msgctxt "Current parameter in function prototype|"
1069 msgid "<b>%1</b>"
1070 msgstr "<b>%1</b>"
1071
1072 #: analitzagui/operatorsmodel.cpp:592
1073 msgctxt "Function parameter separator|"
1074 msgid ", "
1075 msgstr ", "
1076
1077 #: analitzagui/operatorsmodel.cpp:596
1078 msgctxt "Current parameter is the bounding|"
1079 msgid " : bounds"
1080 msgstr " : mugak"
1081
1082 #: analitzagui/variablesmodel.cpp:94
1083 msgctxt "@title:column|"
1084 msgid "Value"
1085 msgstr "Balioa"
1086
1087 #: analitzaplot/plotsfactory.cpp:49
1088 msgctxt "QCoreApplication|"
1089 msgid "The expression is not correct"
1090 msgstr "Adierazpena ez da zuzena"
1091
1092 #: analitzaplot/plotsfactory.cpp:72
1093 #, qt-format
1094 msgctxt "QCoreApplication|"
1095 msgid "Function type '%1' not recognized"
1096 msgstr "«%1» funtzio mota ez da ezagutzen"
1097
1098 #: analitzaplot/plotsfactory.cpp:74
1099 #, qt-format
1100 msgctxt "QCoreApplication|"
1101 msgid "Function '%1' not recognized"
1102 msgstr "«%1» funtzioa ez da ezagutzen"
1103
1104 #: analitzaplot/plotsmodel.cpp:79
1105 msgctxt "@title:column|"
1106 msgid "Plot"
1107 msgstr "Trazatu"
1108
1109 #: analitzaplot/plotter3d_es.cpp:534 declarative/graph2dmobile.cpp:141
1110 msgctxt "QObject|"
1111 msgid "PNG Image (*.png)"
1112 msgstr "PNG irudia (*.png)"
1113
1114 #: analitzaplot/plotter3d_es.cpp:534
1115 msgctxt "QObject|"
1116 msgid "PDF Document (*.pdf)"
1117 msgstr "PDF dokumentua (*.pdf)"
1118
1119 #: analitzaplot/plotter3d_es.cpp:534
1120 msgctxt "QObject|"
1121 msgid "X3D Document (*.x3d)"
1122 msgstr "X3D dokumentua (*.x3d)"
1123
1124 #: analitzaplot/plotter3d_es.cpp:534
1125 msgctxt "QObject|"
1126 msgid "STL Document (*.stl)"
1127 msgstr "STL dokumentua (*.stl)"
1128
1129 #: analitzaplot/private/backends/cartesiancurve.cpp:64
1130 msgctxt "Function type|"
1131 msgid "Plane Curve F(y)"
1132 msgstr "Kurba laua F(y)"
1133
1134 #: analitzaplot/private/backends/cartesiancurve.cpp:80
1135 msgctxt "Function type|"
1136 msgid "Plane Curve F(x)"
1137 msgstr "Kurba laua F(x)"
1138
1139 #: analitzaplot/private/backends/cartesiancurve.cpp:137
1140 #: analitzaplot/private/backends/cartesiancurve.cpp:245
1141 msgctxt "QCoreApplication|"
1142 msgid "We can only draw Real results."
1143 msgstr "Emaitza errealak baino ezin ditugu marraztu."
1144
1145 #: analitzaplot/private/backends/cartesiancurve.cpp:248
1146 #: analitzawidgets/plotsview2d.cpp:236
1147 #, qt-format
1148 msgctxt "QCoreApplication|"
1149 msgid "x=%1 y=%2"
1150 msgstr "x=%1 y=%2"
1151
1152 #: analitzaplot/private/backends/cartesiansurface.cpp:52
1153 msgctxt "Function type|"
1154 msgid "Surface z=F(x,y)"
1155 msgstr "Gainazala z=F(x,y)"
1156
1157 #: analitzaplot/private/backends/cartesiansurface.cpp:94
1158 msgctxt "Function type|"
1159 msgid "Surface y=F(x,z)"
1160 msgstr "Gainazala y=F(x,z)"
1161
1162 #: analitzaplot/private/backends/cartesiansurface.cpp:127
1163 msgctxt "Function type|"
1164 msgid "Surface x=F(y,z)"
1165 msgstr "Gainazala x=F(y,z)"
1166
1167 #: analitzaplot/private/backends/cylindricalsurface.cpp:37
1168 msgctxt "Function type|"
1169 msgid "Cylindrical Surface z=F(r: Radial, p: Polar)"
1170 msgstr "Gainazal zilindrikoa z=F(r: Erradiala, p: Polarra)"
1171
1172 #: analitzaplot/private/backends/implicitcurve.cpp:44
1173 msgctxt "Function type|"
1174 msgid "Implicit Curve"
1175 msgstr "Kurba inplizitua"
1176
1177 #: analitzaplot/private/backends/implicitpolarcurve.cpp:37
1178 msgctxt "Function type|"
1179 msgid "Polar implicit Curve 0=F(r: Radial, p: Polar)"
1180 msgstr "Kurba polar inplizitua 0=F(r: Erradiala, p: Polarra)"
1181
1182 #: analitzaplot/private/backends/implicitsurface.cpp:35
1183 msgctxt "Function type|"
1184 msgid "Implicit Surface"
1185 msgstr "Gainazal inplizitua"
1186
1187 #: analitzaplot/private/backends/parametriccurve2d.cpp:37
1188 msgctxt "Function type|"
1189 msgid "Parametric Curve 2D"
1190 msgstr "2D kurba parametrikoa"
1191
1192 #: analitzaplot/private/backends/parametriccurve3d.cpp:31
1193 msgctxt "Function type|"
1194 msgid "Parametric Curve 3D"
1195 msgstr "3D kurba parametrikoa"
1196
1197 #: analitzaplot/private/backends/parametricsurface.cpp:32
1198 msgctxt "Function type|"
1199 msgid "Parametric Surface"
1200 msgstr "Gainazal parametrikoa"
1201
1202 #: analitzaplot/private/backends/polarcurve.cpp:37
1203 msgctxt "Function type|"
1204 msgid "Polar Curve r=F(p: Polar)"
1205 msgstr "Kurba polarra r=F(p: Polarra)"
1206
1207 #: analitzaplot/private/backends/sphericalsurface.cpp:35
1208 msgctxt "Function type|"
1209 msgid "Spherical Surface Radial=F(t:Azimuth, p: Polar)"
1210 msgstr "Gainazal esferikoko erradiala=F(t:Azimuth, p: Polarra)"
1211
1212 #: analitzawidgets/expressionedit.cpp:295
1213 #, qt-format
1214 msgctxt "QCoreApplication|"
1215 msgid "Result: %1"
1216 msgstr "Emaitza: %1"
1217
1218 #: analitzawidgets/expressionedit.cpp:405
1219 msgctxt "QCoreApplication|"
1220 msgid "To Expression"
1221 msgstr "Adierazpenera"
1222
1223 #: analitzawidgets/expressionedit.cpp:407
1224 msgctxt "QCoreApplication|"
1225 msgid "To MathML"
1226 msgstr "MathML-ra"
1227
1228 #: analitzawidgets/expressionedit.cpp:409
1229 msgctxt "QCoreApplication|"
1230 msgid "Simplify"
1231 msgstr "Sinplifikatu"
1232
1233 #: analitzawidgets/expressionedit.cpp:411
1234 msgctxt "QCoreApplication|"
1235 msgid "Examples"
1236 msgstr "Adibideak"
1237
1238 #: analitzawidgets/plotsview2d.cpp:214
1239 msgctxt "QCoreApplication|"
1240 msgid "Selected viewport too small"
1241 msgstr "Hautatutako ikuspegi-leihatila txikiegia da"