poqm/et/analitza_qt.po

0001 # Copyright (C) YEAR This_file_is_part_of_KDE
0002 # This file is distributed under the same license as the PACKAGE package.
0003 #
0004 # Marek Laane <bald@smail.ee>, 2011, 2012, 2014, 2016, 2019.
0005 msgid ""
0006 msgstr ""
0007 "Project-Id-Version: \n"
0008 "Report-Msgid-Bugs-To: http://bugs.kde.org\n"
0009 "POT-Creation-Date: 2014-02-16 03:26+0000\n"
0010 "PO-Revision-Date: 2019-11-11 20:10+0200\n"
0011 "Last-Translator: Marek Laane <qiilaq69@gmail.com>\n"
0012 "Language-Team: Estonian <kde-et@lists.linux.ee>\n"
0013 "Language: et\n"
0014 "MIME-Version: 1.0\n"
0015 "Content-Type: text/plain; charset=UTF-8\n"
0016 "Content-Transfer-Encoding: 8bit\n"
0017 "Plural-Forms: nplurals=2; plural=n != 1;\n"
0018 "X-Generator: Lokalize 19.08.1\n"
0019 "X-Qt-Contexts: true\n"
0020
0021 msgctxt "QObject|dictionary"
0022 msgid "xaxaxaxaxa"
0023 msgstr "xaxaxaxaxa"
0024
0025 msgctxt "QObject|dictionary"
0026 msgid "cosa"
0027 msgstr "cosa"
0028
0029 #: analitza/analyzer.cpp:193
0030 msgctxt "QCoreApplication|"
0031 msgid "Cannot calculate an empty expression"
0032 msgstr "Tühja avaldist ei saa arvutada"
0033
0034 #: analitza/analyzer.cpp:240 analitza/analyzer.cpp:259
0035 #: analitza/analyzer.cpp:285
0036 msgctxt "QCoreApplication|"
0037 msgid "Must specify a correct operation"
0038 msgstr "Määrata tuleb korrektne tehe"
0039
0040 #: analitza/analyzer.cpp:255 analitza/analyzer.cpp:288
0041 #, qt-format
0042 msgctxt "QCoreApplication|"
0043 msgid "Unknown identifier: '%1'"
0044 msgstr "Tundmatu identifikaator: '%1'"
0045
0046 #: analitza/analyzer.cpp:257 analitza/analyzer.cpp:290
0047 msgctxt "identifier separator in error message|"
0048 msgid "', '"
0049 msgstr "', '"
0050
0051 #: analitza/analyzer.cpp:615
0052 msgctxt "Error message, no proper condition found.|"
0053 msgid "Could not find a proper choice for a condition statement."
0054 msgstr "Tingimuslausele ei leitud sobivat valikut."
0055
0056 #: analitza/analyzer.cpp:936
0057 msgctxt "QCoreApplication|"
0058 msgid "Type not supported for bounding."
0059 msgstr "Tüüp ei sobi piiramiseks."
0060
0061 #: analitza/analyzer.cpp:961
0062 msgctxt "QCoreApplication|"
0063 msgid "The downlimit is greater than the uplimit"
0064 msgstr "Alumine raja on suurem kui ülemine"
0065
0066 #: analitza/analyzer.cpp:963
0067 msgctxt "QCoreApplication|"
0068 msgid "Incorrect uplimit or downlimit."
0069 msgstr "Vigane ülemine või alumine raja."
0070
0071 #: analitza/analyzer.cpp:1055 analitza/analyzer.cpp:1080
0072 #, qt-format
0073 msgctxt "QCoreApplication|"
0074 msgid "Invalid type for parameter '%1'"
0075 msgstr "Tüüp ei ole muutujaga \"%1\" kooskõlas"
0076
0077 #: analitza/analyzer.cpp:1877
0078 msgctxt "By a cycle i mean a variable that depends on itself|"
0079 msgid "Defined a variable cycle"
0080 msgstr "Defineeriti muutuja tsükkel"
0081
0082 #: analitza/analyzer.cpp:1919
0083 msgctxt "QCoreApplication|"
0084 msgid "The result is not a number"
0085 msgstr "Tulemus ei ole arv"
0086
0087 #: analitza/commands/blockmatrixcommands.cpp:44
0088 #: analitza/commands/blockmatrixcommands.cpp:234
0089 #: analitza/commands/listcommands.cpp:47 analitza/commands/listcommands.cpp:64
0090 #: analitza/commands/matrixcommands.cpp:48
0091 #: analitza/commands/matrixcommands.cpp:201
0092 #: analitza/commands/vectorcommands.cpp:45
0093 #: analitza/commands/vectorcommands.cpp:82
0094 #, qt-format
0095 msgctxt "QCoreApplication|"
0096 msgid "Invalid parameter count for '%1'"
0097 msgstr "Vigane parameetrite arv '%1' jaoks"
0098
0099 #: analitza/commands/blockmatrixcommands.cpp:86
0100 #: analitza/commands/blockmatrixcommands.cpp:119
0101 #: analitza/commands/blockmatrixcommands.cpp:122
0102 msgctxt "QCoreApplication|"
0103 msgid "Blocks must have consistent size between each and other"
0104 msgstr "Blokkide omavaheline suurus peab olema kooskõlas"
0105
0106 #: analitza/commands/blockmatrixcommands.cpp:90
0107 #: analitza/commands/blockmatrixcommands.cpp:126
0108 #: analitza/commands/blockmatrixcommands.cpp:263
0109 msgctxt "QCoreApplication|"
0110 msgid "Do not want empty blocks"
0111 msgstr "Tühje blokke ei tohi olla"
0112
0113 #: analitza/commands/blockmatrixcommands.cpp:93
0114 #: analitza/commands/blockmatrixcommands.cpp:130
0115 #: analitza/commands/blockmatrixcommands.cpp:209
0116 #: analitza/commands/blockmatrixcommands.cpp:267
0117 msgctxt "QCoreApplication|"
0118 msgid "Blocks must be matrices"
0119 msgstr "Plokid peavad olema maatriksid"
0120
0121 #: analitza/commands/blockmatrixcommands.cpp:142
0122 msgctxt "QCoreApplication|"
0123 msgid "Number of blocks must be consistent"
0124 msgstr "Blokkide arv peab olema kooskõlas"
0125
0126 #: analitza/commands/blockmatrixcommands.cpp:145
0127 #: analitza/commands/blockmatrixcommands.cpp:211
0128 #: analitza/commands/matrixcommands.cpp:147
0129 msgctxt "QCoreApplication|"
0130 msgid "Do not want empty vectors/matrixrow elements"
0131 msgstr "Tühje vektoreid/maatriksirea elemente ei tohi olla"
0132
0133 #: analitza/commands/blockmatrixcommands.cpp:150
0134 #: analitza/commands/blockmatrixcommands.cpp:213
0135 #: analitza/commands/matrixcommands.cpp:149
0136 msgctxt "QCoreApplication|"
0137 msgid "Matrix constructor needs vectors or matrixrow elements"
0138 msgstr "Maatriksi konstruktor vajab vektoreid või maatriksirea elemente"
0139
0140 #: analitza/commands/blockmatrixcommands.cpp:244
0141 #: analitza/commands/matrixcommands.cpp:288
0142 #, qt-format
0143 msgctxt "QCoreApplication|"
0144 msgid "the arg %1 is invalid or is error"
0145 msgstr "argument %1 on vigane või viga"
0146
0147 #: analitza/commands/eigencommands.cpp:39
0148 #, qt-format
0149 msgctxt "QCoreApplication|"
0150 msgid "Invalid parameter count for '%1'. Should have 1 parameter"
0151 msgstr "Vigane parameetrite arv '%1' jaoks. Peab olema 1 parameeter"
0152
0153 #: analitza/commands/eigencommands.cpp:47
0154 #, qt-format
0155 msgctxt "QCoreApplication|"
0156 msgid "To use '%1' command the input matrix must be square"
0157 msgstr "Käsu \"%1\" kasutamiseks peab sisendmaatriks olema ruut"
0158
0159 #: analitza/commands/eigencommands.cpp:68
0160 #: analitza/commands/eigencommands.cpp:74
0161 #, qt-format
0162 msgctxt "QCoreApplication|"
0163 msgid ""
0164 "Invalid parameter type in matrix entry (%1,%2) for '%3', it must be a number "
0165 "value"
0166 msgstr ""
0167 "Vigane parameetri tüüp maatriksi kirjes (%1,%2) \"%3\" jaoks, peab olema "
0168 "arvväärtus"
0169
0170 #: analitza/commands/eigencommands.cpp:126
0171 #: analitza/commands/eigencommands.cpp:193
0172 msgctxt "QCoreApplication|NaN means Not a Number, is an invalid float number"
0173 msgid "Returned eigenvalue is NaN"
0174 msgstr "Tagastatud omaväärtus on NaN"
0175
0176 #: analitza/commands/eigencommands.cpp:132
0177 #: analitza/commands/eigencommands.cpp:196
0178 msgctxt "QCoreApplication|"
0179 msgid "Returned eigenvalue is too big"
0180 msgstr "Tagastatud omaväärtus on liiga suur"
0181
0182 #: analitza/commands/matrixcommands.cpp:31
0183 msgctxt "QCoreApplication|"
0184 msgid "Matrix dimensions must be greater than zero"
0185 msgstr "Maatriksi mõõtmed peavad olema nullist suuremad"
0186
0187 #: analitza/commands/matrixcommands.cpp:122 analitza/expression.cpp:296
0188 msgctxt "QCoreApplication|"
0189 msgid "All matrixrow elements must have the same size"
0190 msgstr "Kõik maatriksirea elemendid peavad olema ühe suurusega"
0191
0192 #: analitza/commands/matrixcommands.cpp:127
0193 msgctxt "QCoreApplication|"
0194 msgid "Not all are rows or vectors"
0195 msgstr "Mitte kõik ei ole read või vektorid"
0196
0197 #: analitza/commands/matrixcommands.cpp:143
0198 msgctxt "QCoreApplication|"
0199 msgid "Every argument must be a matrixrow element"
0200 msgstr "Kõik argumendid peavad olema maatriksirea elemendid"
0201
0202 #: analitza/commands/matrixcommands.cpp:241
0203 msgctxt "QCoreApplication|"
0204 msgid "The nth diagonal index must be less than the row count"
0205 msgstr "N-nda diagonaali indeks peab olema ridade arvust väiksem"
0206
0207 #: analitza/commands/matrixcommands.cpp:249
0208 msgctxt "QCoreApplication|"
0209 msgid "The nth diagonal index must be less than the column count"
0210 msgstr "N-nda diagonaali indeks peab olema veergude arvust väiksem"
0211
0212 #: analitza/commands/matrixcommands.cpp:265
0213 msgctxt "QCoreApplication|"
0214 msgid "nth diagonal index must be integer number"
0215 msgstr "N-nda diagonaali indeks peab olema täisarv"
0216
0217 #: analitza/commands/matrixcommands.cpp:269
0218 msgctxt "QCoreApplication|"
0219 msgid "nth diagonal index must be a positive integer number"
0220 msgstr "N-nda diagonaali indeks peab olema positiivne täisarv"
0221
0222 #: analitza/commands/vectorcommands.cpp:62
0223 #, qt-format
0224 msgctxt "QCoreApplication|"
0225 msgid "Invalid parameter type for '%1', was expected a list"
0226 msgstr "Vigane parameetri tüüp '%1' jaoks, oodati loendit"
0227
0228 #: analitza/commands/vectorcommands.cpp:75
0229 #: analitza/commands/vectorcommands.cpp:78
0230 msgctxt "QCoreApplication|"
0231 msgid "Vector size must be some integer value greater to zero"
0232 msgstr "Vektori suurus peab olema nullist suurem täisarv"
0233
0234 #: analitza/explexer.cpp:78
0235 msgctxt "QCoreApplication|"
0236 msgid "Unexpectedly arrived to the end of the input"
0237 msgstr "Jõuti ootamatult sisendi lõppu"
0238
0239 #: analitza/explexer.cpp:112
0240 #, qt-format
0241 msgctxt "QCoreApplication|"
0242 msgid "Unknown token %1"
0243 msgstr "Tundmatu märgis %1"
0244
0245 #: analitza/expression.cpp:162
0246 #, qt-format
0247 msgctxt "QCoreApplication|"
0248 msgid "<em>%1</em> needs at least 2 parameters"
0249 msgstr "<em>%1</em> vajab vähemalt 2 parameetrit"
0250
0251 #: analitza/expression.cpp:164
0252 #, qt-format
0253 msgctxt "QCoreApplication|"
0254 msgid "<em>%1</em> requires %2 parameters"
0255 msgstr "<em>%1</em> vajab %2 parameetrit"
0256
0257 #: analitza/expression.cpp:171
0258 #, qt-format
0259 msgctxt "QCoreApplication|"
0260 msgid "Missing boundary for '%1'"
0261 msgstr "Puuduv raja '%1' jaoks"
0262
0263 #: analitza/expression.cpp:173
0264 #, qt-format
0265 msgctxt "QCoreApplication|"
0266 msgid "Unexpected bounding for '%1'"
0267 msgstr "Ootamatu raja '%1' jaoks"
0268
0269 #: analitza/expression.cpp:178
0270 #, qt-format
0271 msgctxt "QCoreApplication|"
0272 msgid "<em>%1</em> missing bounds on '%2'"
0273 msgstr "<em>%1</em> puuduvad rajad '%2' jaoks"
0274
0275 #: analitza/expression.cpp:200
0276 msgctxt "QCoreApplication|"
0277 msgid "Wrong declare"
0278 msgstr "Vale deklaratsioon"
0279
0280 #: analitza/expression.cpp:210
0281 #, qt-format
0282 msgctxt "QCoreApplication|"
0283 msgid "Empty container: %1"
0284 msgstr "Tühi konteiner: %1"
0285
0286 #: analitza/expression.cpp:228
0287 msgctxt "there was a conditional outside a condition structure|"
0288 msgid "We can only have conditionals inside piecewise structures."
0289 msgstr "Tingimused saavad olla ainult piecewise'i struktuuride sees."
0290
0291 #: analitza/expression.cpp:244
0292 #, qt-format
0293 msgctxt "QCoreApplication|"
0294 msgid "Cannot have two parameters with the same name like '%1'."
0295 msgstr "Korraga ei tohi olla kaht parameetrit sama nimega, näiteks \"%1\"."
0296
0297 #: analitza/expression.cpp:259
0298 msgctxt ""
0299 "this is an error message. otherwise is the else in a mathml condition|"
0300 msgid "The <em>otherwise</em> parameter should be the last one"
0301 msgstr "Parameeter <em>otherwise</em> peab olema viimane"
0302
0303 #: analitza/expression.cpp:267
0304 #, qt-format
0305 msgctxt "there was an element that was not a conditional inside a condition|"
0306 msgid "%1 is not a proper condition inside the piecewise"
0307 msgstr "%1 ei ole sobiv tingimus piecewise'i sees"
0308
0309 #: analitza/expression.cpp:273
0310 msgctxt "QCoreApplication|"
0311 msgid "We can only declare variables"
0312 msgstr "Deklareerida saab ainult muutujaid"
0313
0314 #: analitza/expression.cpp:279
0315 msgctxt "QCoreApplication|"
0316 msgid "We can only have bounded variables"
0317 msgstr "Deklareerida saab ainult piiratud muutujaid"
0318
0319 #: analitza/expression.cpp:290 analitza/expression.cpp:495
0320 msgctxt "QCoreApplication|"
0321 msgid "Do not want empty matrixrow elements"
0322 msgstr "Tühje maatriksirea elemente ei tohi olla"
0323
0324 #: analitza/expression.cpp:300
0325 msgctxt "QCoreApplication|"
0326 msgid "The matrix must contain only matrixrow elements"
0327 msgstr "Maatriks peab sisaldama ainult maatriksirea elemente"
0328
0329 #: analitza/expression.cpp:419
0330 #, qt-format
0331 msgctxt "QCoreApplication|"
0332 msgid "Error while parsing: %1"
0333 msgstr "Tõrge parsimisel: %1"
0334
0335 #: analitza/expression.cpp:450
0336 #, qt-format
0337 msgctxt "An error message|"
0338 msgid "Container unknown: %1"
0339 msgstr "Tundmatu konteiner: %1"
0340
0341 #: analitza/expression.cpp:456
0342 #, qt-format
0343 msgctxt "QCoreApplication|"
0344 msgid "Cannot codify the %1 value."
0345 msgstr "%1 väärtuse muutmine koodiks nurjus."
0346
0347 #: analitza/expression.cpp:462
0348 #, qt-format
0349 msgctxt "QCoreApplication|"
0350 msgid "The %1 operator cannot have child contexts."
0351 msgstr "%1 tehtemärgil ei saa olla järglaskonteksti."
0352
0353 #: analitza/expression.cpp:466
0354 #, qt-format
0355 msgctxt "QCoreApplication|"
0356 msgid "The element '%1' is not an operator."
0357 msgstr "Element '%1' ei ole tehtemärk."
0358
0359 #: analitza/expression.cpp:479
0360 msgctxt "QCoreApplication|"
0361 msgid "Do not want empty vectors"
0362 msgstr "Tühje vektoreid ei tohi olla"
0363
0364 #: analitza/expression.cpp:489
0365 msgctxt "QCoreApplication|"
0366 msgid "Do not want empty matrices"
0367 msgstr "Tühje maatrikseid ei tohi olla"
0368
0369 #: analitza/expression.cpp:508
0370 #, qt-format
0371 msgctxt "Error message due to an unrecognized input|"
0372 msgid "Not supported/unknown: %1"
0373 msgstr "Toetamata/tundmatu: %1"
0374
0375 #: analitza/expressionparser.cpp:296
0376 msgctxt "QCoreApplication|"
0377 msgid ", "
0378 msgstr ", "
0379
0380 #: analitza/expressionparser.cpp:296
0381 #, qt-format
0382 msgctxt "error message|"
0383 msgid "Expected %1 instead of '%2'"
0384 msgstr "Oodati %1, aga saadi \"%2\""
0385
0386 #: analitza/expressionparser.cpp:298
0387 msgctxt "QCoreApplication|"
0388 msgid "Missing right parenthesis"
0389 msgstr "Parem sulg puudub"
0390
0391 #: analitza/expressionparser.cpp:300
0392 msgctxt "QCoreApplication|"
0393 msgid "Unbalanced right parenthesis"
0394 msgstr "Üleliigne parem sulg"
0395
0396 #: analitza/expressionparser.cpp:303
0397 #, qt-format
0398 msgctxt "QCoreApplication|"
0399 msgid "Unexpected token identifier: %1"
0400 msgstr "Ootamatu märgise identifikaator: %1"
0401
0402 #: analitza/expressionparser.cpp:305
0403 #, qt-format
0404 msgctxt "QCoreApplication|"
0405 msgid "Unexpected token %1"
0406 msgstr "Ootamatu märgis %1"
0407
0408 #: analitza/expressiontypechecker.cpp:301
0409 #, qt-format
0410 msgctxt "QCoreApplication|"
0411 msgid "Could not find a type that unifies '%1'"
0412 msgstr "Ei leitud tüüpi, mis unifitseeriks \"%1\""
0413
0414 #: analitza/expressiontypechecker.cpp:473
0415 msgctxt "QCoreApplication|"
0416 msgid "The domain should be either a vector or a list"
0417 msgstr "Domeen peab olema vektor või loend."
0418
0419 #: analitza/expressiontypechecker.cpp:558
0420 #, qt-format
0421 msgctxt "type error message|"
0422 msgid "Cannot call '%1'"
0423 msgstr "\"%1\" väljakutsumine nurjus"
0424
0425 #: analitza/expressiontypechecker.cpp:593
0426 #, qt-format
0427 msgctxt "QCoreApplication|"
0428 msgid "Cannot reduce '%1' to '%2'. Invalid type of parameter '%3' for '%4'"
0429 msgstr ""
0430 "\"%1\" taandamine \"%2\" peale nurjus. Vigame parameetri tüüp \"%3\" \"%4\" "
0431 "jaoks"
0432
0433 #: analitza/expressiontypechecker.cpp:604
0434 #, qt-format
0435 msgctxt "QCoreApplication|"
0436 msgid "Invalid parameter count for '%2'. Should have %1 parameters."
0437 msgstr "Vigane parameetrite arv '%2' jaoks. Peab olema %1 parameetrit."
0438
0439 #: analitza/expressiontypechecker.cpp:616
0440 #, qt-format
0441 msgctxt "QCoreApplication|"
0442 msgid "Cannot compare '%1' to '%2'. Invalid type of parameter '%3' for '%4'"
0443 msgstr ""
0444 "\"%1\" ja \"%2\" võrdlemine nurjus. Vigane parameetri tüüp \"%3\" \"%4\" "
0445 "jaoks"
0446
0447 #: analitza/expressiontypechecker.cpp:654
0448 #, qt-format
0449 msgctxt "QCoreApplication|"
0450 msgid "Could not call '%1'"
0451 msgstr "\"%1\" väljakutsumine nurjus"
0452
0453 #: analitza/expressiontypechecker.cpp:662
0454 #, qt-format
0455 msgctxt "QCoreApplication|"
0456 msgid "Could not solve '%1'"
0457 msgstr "\"%1\" lahendamine nurjus"
0458
0459 #: analitza/expressiontypechecker.cpp:695
0460 #, qt-format
0461 msgctxt "QCoreApplication|"
0462 msgid "Incoherent type for the variable '%1'"
0463 msgstr "Tüüp ei ole muutujaga \"%1\" kooskõlas"
0464
0465 #: analitza/expressiontypechecker.cpp:718
0466 msgctxt "QCoreApplication|"
0467 msgid "Could not determine the type for piecewise"
0468 msgstr "Tükiti tüübi määramine nurjus"
0469
0470 #: analitza/expressiontypechecker.cpp:937
0471 msgctxt "QCoreApplication|"
0472 msgid "Unexpected type"
0473 msgstr "Ootamatu tüüp"
0474
0475 #: analitza/expressiontypechecker.cpp:960
0476 #, qt-format
0477 msgctxt "QCoreApplication|"
0478 msgid "Cannot convert '%1' to '%2'"
0479 msgstr "Teisendamine \"%1\" -> \"%2\" nurjus"
0480
0481 #: analitza/htmlexpressionwriter.cpp:54 analitza/htmlexpressionwriter.cpp:55
0482 #, qt-format
0483 msgctxt "html representation of an operator|"
0484 msgid "<span class='op'>%1</span>"
0485 msgstr "<span class='op'>%1</span>"
0486
0487 #: analitza/htmlexpressionwriter.cpp:56
0488 #, qt-format
0489 msgctxt "html representation of an operator|"
0490 msgid "<span class='keyword'>%1</span>"
0491 msgstr "<span class='keyword'>%1</span>"
0492
0493 #: analitza/mathmlpresentationlexer.cpp:94
0494 #, qt-format
0495 msgctxt "Error message|"
0496 msgid "Unknown token '%1'"
0497 msgstr "Tundmatu märgis '%1'"
0498
0499 #: analitza/operations.cpp:54 analitza/operations.cpp:191
0500 msgctxt "QCoreApplication|"
0501 msgid "Cannot divide by 0."
0502 msgstr "Nulliga ei saa jagada."
0503
0504 #: analitza/operations.cpp:72 analitza/operations.cpp:203
0505 msgctxt "QCoreApplication|"
0506 msgid "Cannot calculate the remainder on 0."
0507 msgstr "0 jääki ei saa arvutada."
0508
0509 #: analitza/operations.cpp:84 analitza/operations.cpp:213
0510 msgctxt "QCoreApplication|"
0511 msgid "Cannot calculate the factor on 0."
0512 msgstr "0 tegurit ei saa arvutada."
0513
0514 #: analitza/operations.cpp:140 analitza/operations.cpp:261
0515 msgctxt "QCoreApplication|"
0516 msgid "Cannot calculate the lcm of 0."
0517 msgstr "0 vähimat ühiskordset ei saa arvutada."
0518
0519 #: analitza/operations.cpp:246
0520 msgctxt "QCoreApplication|"
0521 msgid "Boolean operations on complex numbers not available"
0522 msgstr "Tõeväärtustehted kompleksarvudega pole võimalikud"
0523
0524 #: analitza/operations.cpp:276
0525 msgctxt "QCoreApplication|"
0526 msgid "Only square root implemented for complex numbers"
0527 msgstr "Kompleksarvude puhul saab võtta ainult ruutjuurt"
0528
0529 #: analitza/operations.cpp:351 analitza/operations.cpp:463
0530 #, qt-format
0531 msgctxt "QCoreApplication|"
0532 msgid "Could not calculate a value %1"
0533 msgstr "Väärtust %1 ei saa arvutada"
0534
0535 #: analitza/operations.cpp:479
0536 #, qt-format
0537 msgctxt "QCoreApplication|"
0538 msgid "Cannot calculate %1 between a value and an error type"
0539 msgstr "%1 arvutamine väärtuse ja veatüübi vahel nurjus"
0540
0541 #: analitza/operations.cpp:495 analitza/operations.cpp:652
0542 #: analitza/operations.cpp:784
0543 msgctxt "QCoreApplication|"
0544 msgid "Invalid index for a container"
0545 msgstr "Vigane konteineri indeks"
0546
0547 #: analitza/operations.cpp:527
0548 #, qt-format
0549 msgctxt "QCoreApplication|"
0550 msgid "Cannot operate '%1' on different sized vectors."
0551 msgstr "\"%1\" eri suuruses vektoritel ei ole kasutatav."
0552
0553 #: analitza/operations.cpp:566
0554 msgctxt "QCoreApplication|"
0555 msgid ""
0556 "Multiplication between a matrix and a vector is allowed provided that the "
0557 "number of columns of the matrix equals the size of the vector"
0558 msgstr ""
0559 "Maatriksi ja vektori korrutamine on lubatud, kui maatriksi vektorite arv "
0560 "võrdub vektori suurusega"
0561
0562 #: analitza/operations.cpp:570 analitza/operations.cpp:707
0563 msgctxt "QCoreApplication|"
0564 msgid "Matrix and vector entries must be numbers"
0565 msgstr "Maatriksi ja vektori kirjed peavad olema arvud"
0566
0567 #: analitza/operations.cpp:599
0568 #, qt-format
0569 msgctxt "QCoreApplication|"
0570 msgid "Could not calculate a vector's %1"
0571 msgstr "Vektori %1 ei saa arvutada"
0572
0573 #: analitza/operations.cpp:621 analitza/operations.cpp:637
0574 #, qt-format
0575 msgctxt "QCoreApplication|"
0576 msgid "Could not calculate a list's %1"
0577 msgstr "Loendi %1 ei saa arvutada"
0578
0579 #: analitza/operations.cpp:703
0580 msgctxt "QCoreApplication|"
0581 msgid ""
0582 "Multiplication between a vector and a matrix is allowed provided that the "
0583 "matrix has only one matrixrow element"
0584 msgstr ""
0585 "Vektori ja maatriksi korrutamine on lubatud, kui maatriksil on ainult üks "
0586 "maatriksirea element"
0587
0588 #: analitza/operations.cpp:730
0589 msgctxt "QCoreApplication|"
0590 msgid ""
0591 "Addition of two matrices is allowed provided that both matrices have the "
0592 "same number of rows and the same number of columns"
0593 msgstr ""
0594 "Kahe maatriksi liitmine on lubatud, kui mõlemal maatriksil on ühepalju ridu "
0595 "ja ühepalju veerge"
0596
0597 #: analitza/operations.cpp:762
0598 msgctxt "QCoreApplication|"
0599 msgid ""
0600 "Multiplication of two matrices is allowed provided that the number of "
0601 "columns of the first matrix equals the number of rows of the second matrix"
0602 msgstr ""
0603 "Kahe maatriksi korrutamine on lubatud, kui esimese maatriksi veergude arv "
0604 "võrdub teise maatriksi ridade arvuga"
0605
0606 #: analitza/operations.cpp:766 analitza/operations.cpp:804
0607 #: analitza/operations.cpp:887
0608 msgctxt "QCoreApplication|"
0609 msgid "Matrix entries must be numbers"
0610 msgstr "Maatriksi kirjed peavad olema arvud"
0611
0612 #: analitza/operations.cpp:879
0613 msgctxt "QCoreApplication|"
0614 msgid "The exponent of 'power' must be some integer number"
0615 msgstr "Astendaja peab olema täisarv"
0616
0617 #: analitza/operations.cpp:883
0618 msgctxt "QCoreApplication|"
0619 msgid "Cannot compute 'power' for non square matrix"
0620 msgstr "Mitte-ruutmaatrikseid ei saa astendada"
0621
0622 #: analitza/operations.cpp:922
0623 #, qt-format
0624 msgctxt "QCoreApplication|"
0625 msgid "Cannot calculate %1 between a matrix and an error type"
0626 msgstr "%1 arvutamine maatriksi ja veatüübi vahel nurjus"
0627
0628 #: analitza/providederivative.cpp:93
0629 #, qt-format
0630 msgctxt "QCoreApplication|"
0631 msgid "Could not calculate the derivative for '%1'"
0632 msgstr "\"%1\" tuletist ei saa arvutada"
0633
0634 #: analitzagui/operatorsmodel.cpp:95 analitzagui/variablesmodel.cpp:91
0635 #: analitzaplot/plotsdictionarymodel.cpp:36 analitzaplot/plotsmodel.cpp:78
0636 msgctxt "@title:column|"
0637 msgid "Name"
0638 msgstr "Nimi"
0639
0640 #: analitzagui/operatorsmodel.cpp:98
0641 msgctxt "@title:column|"
0642 msgid "Description"
0643 msgstr "Kirjeldus"
0644
0645 #: analitzagui/operatorsmodel.cpp:101
0646 msgctxt "@title:column|"
0647 msgid "Parameters"
0648 msgstr "Parameetrid"
0649
0650 #: analitzagui/operatorsmodel.cpp:104
0651 msgctxt "@title:column|"
0652 msgid "Example"
0653 msgstr "Näide"
0654
0655 #: analitzagui/operatorsmodel.cpp:135
0656 msgctxt "Syntax for function bounding|"
0657 msgid " : var"
0658 msgstr " : muutuja"
0659
0660 #: analitzagui/operatorsmodel.cpp:137
0661 msgctxt "Syntax for function bounding values|"
0662 msgid "=from..to"
0663 msgstr "=alates..kuni"
0664
0665 #: analitzagui/operatorsmodel.cpp:140
0666 #, qt-format
0667 msgctxt "QCoreApplication|"
0668 msgid "%1("
0669 msgstr "%1("
0670
0671 #: analitzagui/operatorsmodel.cpp:143
0672 #, qt-format
0673 msgctxt "QCoreApplication|"
0674 msgid "%1... parameters, ...%2)"
0675 msgstr "%1... parameetrid, ...%2)"
0676
0677 #: analitzagui/operatorsmodel.cpp:146
0678 #, qt-format
0679 msgctxt "QCoreApplication|"
0680 msgid "par%1"
0681 msgstr "par%1"
0682
0683 #: analitzagui/operatorsmodel.cpp:159
0684 msgctxt "QCoreApplication|"
0685 msgid "Addition"
0686 msgstr "Liitmine"
0687
0688 #: analitzagui/operatorsmodel.cpp:162
0689 msgctxt "QCoreApplication|"
0690 msgid "Multiplication"
0691 msgstr "Korrutamine"
0692
0693 #: analitzagui/operatorsmodel.cpp:165
0694 msgctxt "QCoreApplication|"
0695 msgid "Division"
0696 msgstr "Jagamine"
0697
0698 #: analitzagui/operatorsmodel.cpp:168
0699 msgctxt "QCoreApplication|"
0700 msgid "Subtraction. Will remove all values from the first one."
0701 msgstr "Lahutamine. Arvab kõik väärtused esimesest maha."
0702
0703 #: analitzagui/operatorsmodel.cpp:171
0704 msgctxt "QCoreApplication|"
0705 msgid "Power"
0706 msgstr "Aste"
0707
0708 #: analitzagui/operatorsmodel.cpp:174
0709 msgctxt "QCoreApplication|"
0710 msgid "Remainder"
0711 msgstr "Jääk"
0712
0713 #: analitzagui/operatorsmodel.cpp:177
0714 msgctxt "QCoreApplication|"
0715 msgid "Quotient"
0716 msgstr "Jagatis"
0717
0718 #: analitzagui/operatorsmodel.cpp:180
0719 msgctxt "QCoreApplication|"
0720 msgid "The factor of"
0721 msgstr "Tegur"
0722
0723 #: analitzagui/operatorsmodel.cpp:183
0724 msgctxt "QCoreApplication|"
0725 msgid "Factorial. factorial(n)=n!"
0726 msgstr "Faktoriaal. factorial(n)=n!"
0727
0728 #: analitzagui/operatorsmodel.cpp:186
0729 msgctxt "QCoreApplication|"
0730 msgid "Function to calculate the sine of a given angle"
0731 msgstr "Antud nurga siinuse arvutamise funktsioon"
0732
0733 #: analitzagui/operatorsmodel.cpp:189
0734 msgctxt "QCoreApplication|"
0735 msgid "Function to calculate the cosine of a given angle"
0736 msgstr "Antud nurga koosinuse arvutamise funktsioon"
0737
0738 #: analitzagui/operatorsmodel.cpp:192
0739 msgctxt "QCoreApplication|"
0740 msgid "Function to calculate the tangent of a given angle"
0741 msgstr "Antud nurga tangensi arvutamise funktsioon"
0742
0743 #: analitzagui/operatorsmodel.cpp:195
0744 msgctxt "QCoreApplication|"
0745 msgid "Secant"
0746 msgstr "Seekans"
0747
0748 #: analitzagui/operatorsmodel.cpp:198
0749 msgctxt "QCoreApplication|"
0750 msgid "Cosecant"
0751 msgstr "Koosekans"
0752
0753 #: analitzagui/operatorsmodel.cpp:201
0754 msgctxt "QCoreApplication|"
0755 msgid "Cotangent"
0756 msgstr "Kootangens"
0757
0758 #: analitzagui/operatorsmodel.cpp:204
0759 msgctxt "QCoreApplication|"
0760 msgid "Hyperbolic sine"
0761 msgstr "Hüperboolne siinus"
0762
0763 #: analitzagui/operatorsmodel.cpp:207
0764 msgctxt "QCoreApplication|"
0765 msgid "Hyperbolic cosine"
0766 msgstr "Hüperboolne koosinus"
0767
0768 #: analitzagui/operatorsmodel.cpp:210
0769 msgctxt "QCoreApplication|"
0770 msgid "Hyperbolic tangent"
0771 msgstr "Hüperboolne tangens"
0772
0773 #: analitzagui/operatorsmodel.cpp:213
0774 msgctxt "QCoreApplication|"
0775 msgid "Hyperbolic secant"
0776 msgstr "Hüperboolne seekans"
0777
0778 #: analitzagui/operatorsmodel.cpp:216
0779 msgctxt "QCoreApplication|"
0780 msgid "Hyperbolic cosecant"
0781 msgstr "Hüperboolne koosekans"
0782
0783 #: analitzagui/operatorsmodel.cpp:219
0784 msgctxt "QCoreApplication|"
0785 msgid "Hyperbolic cotangent"
0786 msgstr "Hüperboolne kootangens"
0787
0788 #: analitzagui/operatorsmodel.cpp:222
0789 msgctxt "QCoreApplication|"
0790 msgid "Arc sine"
0791 msgstr "Arkussiinus"
0792
0793 #: analitzagui/operatorsmodel.cpp:225
0794 msgctxt "QCoreApplication|"
0795 msgid "Arc cosine"
0796 msgstr "Arkuskoosinus"
0797
0798 #: analitzagui/operatorsmodel.cpp:228
0799 msgctxt "QCoreApplication|"
0800 msgid "Arc tangent"
0801 msgstr "Arkustangens"
0802
0803 #: analitzagui/operatorsmodel.cpp:231
0804 msgctxt "QCoreApplication|"
0805 msgid "Arc cotangent"
0806 msgstr "Arkuskootangens"
0807
0808 #: analitzagui/operatorsmodel.cpp:237
0809 msgctxt "QCoreApplication|"
0810 msgid "Hyperbolic arc tangent"
0811 msgstr "Hüperboolne arkustangens"
0812
0813 #: analitzagui/operatorsmodel.cpp:240
0814 msgctxt "QCoreApplication|"
0815 msgid "Summatory"
0816 msgstr "Summa"
0817
0818 #: analitzagui/operatorsmodel.cpp:243
0819 msgctxt "QCoreApplication|"
0820 msgid "Productory"
0821 msgstr "Korrutis"
0822
0823 #: analitzagui/operatorsmodel.cpp:246
0824 msgctxt "QCoreApplication|"
0825 msgid "For all"
0826 msgstr "Üldisus"
0827
0828 #: analitzagui/operatorsmodel.cpp:249
0829 msgctxt "QCoreApplication|"
0830 msgid "Exists"
0831 msgstr "Olemasolu"
0832
0833 #: analitzagui/operatorsmodel.cpp:252
0834 msgctxt "QCoreApplication|"
0835 msgid "Differentiation"
0836 msgstr "Diferents"
0837
0838 #: analitzagui/operatorsmodel.cpp:255
0839 msgctxt "QCoreApplication|"
0840 msgid "Hyperbolic arc sine"
0841 msgstr "Hüperboolne arkussiinus"
0842
0843 #: analitzagui/operatorsmodel.cpp:258
0844 msgctxt "QCoreApplication|"
0845 msgid "Hyperbolic arc cosine"
0846 msgstr "Hüperboolne arkuskoosinus"
0847
0848 #: analitzagui/operatorsmodel.cpp:261
0849 msgctxt "QCoreApplication|"
0850 msgid "Arc cosecant"
0851 msgstr "Arkuskoosekans"
0852
0853 #: analitzagui/operatorsmodel.cpp:264
0854 msgctxt "QCoreApplication|"
0855 msgid "Hyperbolic arc cosecant"
0856 msgstr "Hüperboolne arkuskoosekans"
0857
0858 #: analitzagui/operatorsmodel.cpp:267
0859 msgctxt "QCoreApplication|"
0860 msgid "Arc secant"
0861 msgstr "Arkusseekans"
0862
0863 #: analitzagui/operatorsmodel.cpp:270
0864 msgctxt "QCoreApplication|"
0865 msgid "Hyperbolic arc secant"
0866 msgstr "Hüperboolne arkusseekans"
0867
0868 #: analitzagui/operatorsmodel.cpp:273
0869 msgctxt "QCoreApplication|"
0870 msgid "Exponent (e^x)"
0871 msgstr "Eksponent (e^x)"
0872
0873 #: analitzagui/operatorsmodel.cpp:276
0874 msgctxt "QCoreApplication|"
0875 msgid "Base-e logarithm"
0876 msgstr "Naturaallogaritm"
0877
0878 #: analitzagui/operatorsmodel.cpp:279
0879 msgctxt "QCoreApplication|"
0880 msgid "Base-10 logarithm"
0881 msgstr "Kümnendlogaritm"
0882
0883 #: analitzagui/operatorsmodel.cpp:282
0884 msgctxt "QCoreApplication|"
0885 msgid "Absolute value. abs(n)=|n|"
0886 msgstr "Absoluutväärtus. abs(n)=|n|"
0887
0888 #: analitzagui/operatorsmodel.cpp:285
0889 msgctxt "QCoreApplication|"
0890 msgid "Conjugate"
0891 msgstr "Konjugaat"
0892
0893 #: analitzagui/operatorsmodel.cpp:288
0894 msgctxt "QCoreApplication|"
0895 msgid "Arg"
0896 msgstr "Arg"
0897
0898 #: analitzagui/operatorsmodel.cpp:291
0899 msgctxt "QCoreApplication|"
0900 msgid "Real"
0901 msgstr "Reaalarv"
0902
0903 #: analitzagui/operatorsmodel.cpp:294
0904 msgctxt "QCoreApplication|"
0905 msgid "Imaginary"
0906 msgstr "Imaginaararv"
0907
0908 #: analitzagui/operatorsmodel.cpp:297
0909 msgctxt "QCoreApplication|"
0910 msgid "Floor value. floor(n)=⌊n⌋"
0911 msgstr "Alumine piirväärtus. floor(n)=⌊n⌋"
0912
0913 #: analitzagui/operatorsmodel.cpp:300
0914 msgctxt "QCoreApplication|"
0915 msgid "Ceil value. ceil(n)=⌈n⌉"
0916 msgstr "Ülemine piirväärtus. ceil(n)=⌈n⌉"
0917
0918 #: analitzagui/operatorsmodel.cpp:303
0919 msgctxt "QCoreApplication|"
0920 msgid "Minimum"
0921 msgstr "Miinimum"
0922
0923 #: analitzagui/operatorsmodel.cpp:306
0924 msgctxt "QCoreApplication|"
0925 msgid "Maximum"
0926 msgstr "Maksimum"
0927
0928 #: analitzagui/operatorsmodel.cpp:309
0929 msgctxt "QCoreApplication|"
0930 msgid "Greater than. gt(a,b)=a>b"
0931 msgstr "Suurem kui. gt(a,b)=a>b"
0932
0933 #: analitzagui/operatorsmodel.cpp:312
0934 msgctxt "QCoreApplication|"
0935 msgid "Less than. lt(a,b)=a<b"
0936 msgstr "Väiksem kui. lt(a,b)=a<"
0937
0938 #: analitzagui/operatorsmodel.cpp:315
0939 msgctxt "QCoreApplication|"
0940 msgid "Equal. eq(a,b) = a=b"
0941 msgstr "Võrdne. eq(a,b) = a=b"
0942
0943 #: analitzagui/operatorsmodel.cpp:318
0944 msgctxt "QCoreApplication|"
0945 msgid "Approximation. approx(a)=a±n"
0946 msgstr "Lähendus. approx(a)=a±n"
0947
0948 #: analitzagui/operatorsmodel.cpp:321
0949 msgctxt "QCoreApplication|"
0950 msgid "Not equal. neq(a,b)=a≠b"
0951 msgstr "Mittevõrdne. neq(a,b)=a≠b"
0952
0953 #: analitzagui/operatorsmodel.cpp:324
0954 msgctxt "QCoreApplication|"
0955 msgid "Greater or equal. geq(a,b)=a≥b"
0956 msgstr "Suurem või võrdne. geq(a,b)=a≥b"
0957
0958 #: analitzagui/operatorsmodel.cpp:327
0959 msgctxt "QCoreApplication|"
0960 msgid "Less or equal. leq(a,b)=a≤b"
0961 msgstr "Väiksem või võrdne. leq(a,b)=a≤b"
0962
0963 #: analitzagui/operatorsmodel.cpp:330
0964 msgctxt "QCoreApplication|"
0965 msgid "Boolean and"
0966 msgstr "Tõeväärtus JA"
0967
0968 #: analitzagui/operatorsmodel.cpp:333
0969 msgctxt "QCoreApplication|"
0970 msgid "Boolean not"
0971 msgstr "Tõeväärtus EI"
0972
0973 #: analitzagui/operatorsmodel.cpp:336
0974 msgctxt "QCoreApplication|"
0975 msgid "Boolean or"
0976 msgstr "Tõeväärtus VÕI"
0977
0978 #: analitzagui/operatorsmodel.cpp:339
0979 msgctxt "QCoreApplication|"
0980 msgid "Boolean xor"
0981 msgstr "Tõeväärtus XOR"
0982
0983 #: analitzagui/operatorsmodel.cpp:342
0984 msgctxt "QCoreApplication|"
0985 msgid "Boolean implication"
0986 msgstr "Implikatsioon"
0987
0988 #: analitzagui/operatorsmodel.cpp:345
0989 msgctxt "QCoreApplication|"
0990 msgid "Greatest common divisor"
0991 msgstr "Suurim ühistegur"
0992
0993 #: analitzagui/operatorsmodel.cpp:348
0994 msgctxt "QCoreApplication|"
0995 msgid "Least common multiple"
0996 msgstr "Vähim ühiskordne"
0997
0998 #: analitzagui/operatorsmodel.cpp:351
0999 msgctxt "QCoreApplication|"
1000 msgid "Root"
1001 msgstr "Juur"
1002
1003 #: analitzagui/operatorsmodel.cpp:354
1004 msgctxt "QCoreApplication|"
1005 msgid "Cardinal"
1006 msgstr "Põhiarv"
1007
1008 #: analitzagui/operatorsmodel.cpp:357
1009 msgctxt "QCoreApplication|"
1010 msgid "Scalar product"
1011 msgstr "Skalaarkorrutis"
1012
1013 #: analitzagui/operatorsmodel.cpp:360
1014 msgctxt "QCoreApplication|"
1015 msgid "Select the par1-th element of par2 list or vector"
1016 msgstr "par2 loendi või vektori par1-nda elemendi valimine"
1017
1018 #: analitzagui/operatorsmodel.cpp:363
1019 msgctxt "QCoreApplication|"
1020 msgid "Joins several items of the same type"
1021 msgstr "Mitme samatüübilise elemendi ühendamine"
1022
1023 #: analitzagui/operatorsmodel.cpp:366
1024 msgctxt "QCoreApplication|"
1025 msgid "Applies a function to every element in a list"
1026 msgstr "Funktsiooni rakendamine loendi kõigile elementidele"
1027
1028 #: analitzagui/operatorsmodel.cpp:369
1029 msgctxt "QCoreApplication|"
1030 msgid "Removes all elements that don't fit a condition"
1031 msgstr "Kõigi elementide eemaldamine, mis ei vasta tingimusele"
1032
1033 #: analitzagui/operatorsmodel.cpp:372
1034 msgctxt "QCoreApplication|"
1035 msgid "Transpose"
1036 msgstr "Transponeerimine"
1037
1038 #: analitzagui/operatorsmodel.cpp:572
1039 #, qt-format
1040 msgctxt "n-ary function prototype|"
1041 msgid "<em>%1</em>(..., <b>par%2</b>, ...)"
1042 msgstr "<em>%1</em>(..., <b>par%2</b>, ...)"
1043
1044 #: analitzagui/operatorsmodel.cpp:582
1045 #, qt-format
1046 msgctxt "Function name in function prototype|"
1047 msgid "<em>%1</em>("
1048 msgstr "<em>%1</em>("
1049
1050 #: analitzagui/operatorsmodel.cpp:583
1051 #, qt-format
1052 msgctxt "Uncorrect function name in function prototype|"
1053 msgid "<em style='color:red'><b>%1</b></em>("
1054 msgstr "<em style='color:red'><b>%1</b></em>("
1055
1056 #: analitzagui/operatorsmodel.cpp:586
1057 #, qt-format
1058 msgctxt "Parameter in function prototype|"
1059 msgid "par%1"
1060 msgstr "par%1"
1061
1062 #: analitzagui/operatorsmodel.cpp:589 analitzagui/operatorsmodel.cpp:599
1063 #, qt-format
1064 msgctxt "Current parameter in function prototype|"
1065 msgid "<b>%1</b>"
1066 msgstr "<b>%1</b>"
1067
1068 #: analitzagui/operatorsmodel.cpp:592
1069 msgctxt "Function parameter separator|"
1070 msgid ", "
1071 msgstr ", "
1072
1073 #: analitzagui/operatorsmodel.cpp:596
1074 msgctxt "Current parameter is the bounding|"
1075 msgid " : bounds"
1076 msgstr " : piirav"
1077
1078 #: analitzagui/variablesmodel.cpp:94
1079 msgctxt "@title:column|"
1080 msgid "Value"
1081 msgstr "Väärtus"
1082
1083 #: analitzaplot/plotsfactory.cpp:49
1084 msgctxt "QCoreApplication|"
1085 msgid "The expression is not correct"
1086 msgstr "Avaldis ei ole korrektne"
1087
1088 #: analitzaplot/plotsfactory.cpp:72
1089 #, qt-format
1090 msgctxt "QCoreApplication|"
1091 msgid "Function type '%1' not recognized"
1092 msgstr "Funktsiooni tüüp '%1' on tundmatu"
1093
1094 #: analitzaplot/plotsfactory.cpp:74
1095 #, qt-format
1096 msgctxt "QCoreApplication|"
1097 msgid "Function '%1' not recognized"
1098 msgstr "Funktsioon '%1' on tundmatu"
1099
1100 #: analitzaplot/plotsmodel.cpp:79
1101 msgctxt "@title:column|"
1102 msgid "Plot"
1103 msgstr "Joonis"
1104
1105 #: analitzaplot/plotter3d_es.cpp:534 declarative/graph2dmobile.cpp:141
1106 msgctxt "QObject|"
1107 msgid "PNG Image (*.png)"
1108 msgstr "PNG-pilt (*.png)"
1109
1110 #: analitzaplot/plotter3d_es.cpp:534
1111 msgctxt "QObject|"
1112 msgid "PDF Document (*.pdf)"
1113 msgstr "PDF-dokument (*.pdf)"
1114
1115 #: analitzaplot/plotter3d_es.cpp:534
1116 msgctxt "QObject|"
1117 msgid "X3D Document (*.x3d)"
1118 msgstr "X3D-dokument (*.x3d)"
1119
1120 #: analitzaplot/plotter3d_es.cpp:534
1121 msgctxt "QObject|"
1122 msgid "STL Document (*.stl)"
1123 msgstr "STL-dokument (*.stl)"
1124
1125 #: analitzaplot/private/backends/cartesiancurve.cpp:64
1126 msgctxt "Function type|"
1127 msgid "Plane Curve F(y)"
1128 msgstr "Tasandiline joon F(y)"
1129
1130 #: analitzaplot/private/backends/cartesiancurve.cpp:80
1131 msgctxt "Function type|"
1132 msgid "Plane Curve F(x)"
1133 msgstr "Tasandiline joon F(x)"
1134
1135 #: analitzaplot/private/backends/cartesiancurve.cpp:137
1136 #: analitzaplot/private/backends/cartesiancurve.cpp:245
1137 msgctxt "QCoreApplication|"
1138 msgid "We can only draw Real results."
1139 msgstr "Joonistada saab ainult tegelikke tulemusi."
1140
1141 #: analitzaplot/private/backends/cartesiancurve.cpp:248
1142 #: analitzawidgets/plotsview2d.cpp:236
1143 #, qt-format
1144 msgctxt "QCoreApplication|"
1145 msgid "x=%1 y=%2"
1146 msgstr "x=%1 y=%2"
1147
1148 #: analitzaplot/private/backends/cartesiansurface.cpp:52
1149 msgctxt "Function type|"
1150 msgid "Surface z=F(x,y)"
1151 msgstr "Pind z=F(x,y)"
1152
1153 #: analitzaplot/private/backends/cartesiansurface.cpp:94
1154 msgctxt "Function type|"
1155 msgid "Surface y=F(x,z)"
1156 msgstr "Pind y=F(x,z)"
1157
1158 #: analitzaplot/private/backends/cartesiansurface.cpp:127
1159 msgctxt "Function type|"
1160 msgid "Surface x=F(y,z)"
1161 msgstr "Pind x=F(y,z)"
1162
1163 #: analitzaplot/private/backends/cylindricalsurface.cpp:37
1164 msgctxt "Function type|"
1165 msgid "Cylindrical Surface z=F(r: Radial, p: Polar)"
1166 msgstr "Silindriline pind z=F(r: radiaal, p: polaar)"
1167
1168 #: analitzaplot/private/backends/implicitcurve.cpp:44
1169 msgctxt "Function type|"
1170 msgid "Implicit Curve"
1171 msgstr "Ilmutamata joon"
1172
1173 #: analitzaplot/private/backends/implicitpolarcurve.cpp:37
1174 msgctxt "Function type|"
1175 msgid "Polar implicit Curve 0=F(r: Radial, p: Polar)"
1176 msgstr "Polaarne ilmutamata joon 0=F(r: radiaal, p: polaar)"
1177
1178 #: analitzaplot/private/backends/implicitsurface.cpp:35
1179 msgctxt "Function type|"
1180 msgid "Implicit Surface"
1181 msgstr "Ilmutamata pind"
1182
1183 #: analitzaplot/private/backends/parametriccurve2d.cpp:37
1184 msgctxt "Function type|"
1185 msgid "Parametric Curve 2D"
1186 msgstr "Parameetriline joon 2D"
1187
1188 #: analitzaplot/private/backends/parametriccurve3d.cpp:31
1189 msgctxt "Function type|"
1190 msgid "Parametric Curve 3D"
1191 msgstr "Parameetriline joon 3D"
1192
1193 #: analitzaplot/private/backends/parametricsurface.cpp:32
1194 msgctxt "Function type|"
1195 msgid "Parametric Surface"
1196 msgstr "Parameetriline pind"
1197
1198 #: analitzaplot/private/backends/polarcurve.cpp:37
1199 msgctxt "Function type|"
1200 msgid "Polar Curve r=F(p: Polar)"
1201 msgstr "Polaarne joon r=F(p: polaar)"
1202
1203 #: analitzaplot/private/backends/sphericalsurface.cpp:35
1204 msgctxt "Function type|"
1205 msgid "Spherical Surface Radial=F(t:Azimuth, p: Polar)"
1206 msgstr "Sfääriline pind Radiaal=F(t:ssimuut, p: polaar)"
1207
1208 #: analitzawidgets/expressionedit.cpp:295
1209 #, qt-format
1210 msgctxt "QCoreApplication|"
1211 msgid "Result: %1"
1212 msgstr "Tulemus: %1"
1213
1214 #: analitzawidgets/expressionedit.cpp:405
1215 msgctxt "QCoreApplication|"
1216 msgid "To Expression"
1217 msgstr "Avaldisena"
1218
1219 #: analitzawidgets/expressionedit.cpp:407
1220 msgctxt "QCoreApplication|"
1221 msgid "To MathML"
1222 msgstr "MathML-ina"
1223
1224 #: analitzawidgets/expressionedit.cpp:409
1225 msgctxt "QCoreApplication|"
1226 msgid "Simplify"
1227 msgstr "Lihtsustatult"
1228
1229 #: analitzawidgets/expressionedit.cpp:411
1230 msgctxt "QCoreApplication|"
1231 msgid "Examples"
1232 msgstr "Näited"
1233
1234 #: analitzawidgets/plotsview2d.cpp:214
1235 msgctxt "QCoreApplication|"
1236 msgid "Selected viewport too small"
1237 msgstr "Valitud vaateava on liiga väike"
1238
1239 #~ msgctxt "NAME OF TRANSLATORS"
1240 #~ msgid "Your names"
1241 #~ msgstr "Marek Laane"
1242
1243 #~ msgctxt "EMAIL OF TRANSLATORS"
1244 #~ msgid "Your emails"
1245 #~ msgstr "bald@smail.ee"
1246
1247 #~ msgctxt "Parameter in function prototype"
1248 #~ msgid "par%1"
1249 #~ msgstr "par%1"
1250
1251 #~ msgctxt "Function parameter separator"
1252 #~ msgid ", "
1253 #~ msgstr ", "
1254
1255 #, fuzzy
1256 #~| msgid "Hyperbolic secant"
1257 #~ msgctxt "dictionary"
1258 #~ msgid "Hiperbola"
1259 #~ msgstr "Hüperboolne seekans"
1260
1261 #~ msgid "Function type not correct for functions depending on %1"
1262 #~ msgstr ""
1263 #~ "Funktsiooni tüüp ei ole õige funktsioonide puhul, mille sõltuvuseks on %1"
1264
1265 #~ msgctxt ""
1266 #~ "This function can't be represented as a curve. To draw implicit curve, "
1267 #~ "the function has to satisfy the implicit function theorem."
1268 #~ msgid "Implicit function undefined in the plane"
1269 #~ msgstr "Määramata funktsioon on defineerimata"
1270
1271 #~ msgid "center"
1272 #~ msgstr "poolus"
1273
1274 #~ msgctxt "@title:column"
1275 #~ msgid "Function"
1276 #~ msgstr "Funktsioon"
1277
1278 #~ msgid "%1 function added"
1279 #~ msgstr "%1 funktsioon lisatud"
1280
1281 #~ msgid "Hide '%1'"
1282 #~ msgstr "Peida \"%1\""
1283
1284 #~ msgid "Show '%1'"
1285 #~ msgstr "Näita \"%1\""
1286
1287 #~ msgid "Remove '%1'"
1288 #~ msgstr "Eemalda \"%1\""
1289
1290 #~ msgctxt "Error message"
1291 #~ msgid "Unknown token %1"
1292 #~ msgstr "Tundmatu märgis %1"