poqm/da/analitza_qt.po

0001 # Copyright (C) YEAR This_file_is_part_of_KDE
0002 # This file is distributed under the same license as the PACKAGE package.
0003 #
0004 # Martin Schlander <mschlander@opensuse.org>, 2012, 2013, 2014, 2015.
0005 msgid ""
0006 msgstr ""
0007 "Project-Id-Version: \n"
0008 "Report-Msgid-Bugs-To: http://bugs.kde.org\n"
0009 "POT-Creation-Date: 2014-02-16 03:26+0000\n"
0010 "PO-Revision-Date: 2015-12-08 18:41+0100\n"
0011 "Last-Translator: Martin Schlander <mschlander@opensuse.org>\n"
0012 "Language-Team: Danish <kde-i18n-doc@kde.org>\n"
0013 "Language: da\n"
0014 "MIME-Version: 1.0\n"
0015 "Content-Type: text/plain; charset=UTF-8\n"
0016 "Content-Transfer-Encoding: 8bit\n"
0017 "Plural-Forms: nplurals=2; plural=n != 1;\n"
0018 "X-Generator: Lokalize 2.0\n"
0019 "X-Qt-Contexts: true\n"
0020
0021 msgctxt "QObject|dictionary"
0022 msgid "xaxaxaxaxa"
0023 msgstr "xaxaxaxaxa"
0024
0025 msgctxt "QObject|dictionary"
0026 msgid "cosa"
0027 msgstr "cosa"
0028
0029 #: analitza/analyzer.cpp:193
0030 msgctxt "QCoreApplication|"
0031 msgid "Cannot calculate an empty expression"
0032 msgstr "Kan ikke udregne et tomt udtryk"
0033
0034 #: analitza/analyzer.cpp:240 analitza/analyzer.cpp:259
0035 #: analitza/analyzer.cpp:285
0036 msgctxt "QCoreApplication|"
0037 msgid "Must specify a correct operation"
0038 msgstr "Skal specificere en korrekt handling"
0039
0040 #: analitza/analyzer.cpp:255 analitza/analyzer.cpp:288
0041 #, qt-format
0042 msgctxt "QCoreApplication|"
0043 msgid "Unknown identifier: '%1'"
0044 msgstr "Ukendt identifikator: \"%1\""
0045
0046 #: analitza/analyzer.cpp:257 analitza/analyzer.cpp:290
0047 msgctxt "identifier separator in error message|"
0048 msgid "', '"
0049 msgstr "', '"
0050
0051 #: analitza/analyzer.cpp:615
0052 msgctxt "Error message, no proper condition found.|"
0053 msgid "Could not find a proper choice for a condition statement."
0054 msgstr "Kunne ikke finde et passende valg til en betingelsessætning."
0055
0056 #: analitza/analyzer.cpp:936
0057 msgctxt "QCoreApplication|"
0058 msgid "Type not supported for bounding."
0059 msgstr "Der kan ikke sættes grænser for denne type."
0060
0061 #: analitza/analyzer.cpp:961
0062 msgctxt "QCoreApplication|"
0063 msgid "The downlimit is greater than the uplimit"
0064 msgstr "Den nedre grænse er større end den øvre grænse"
0065
0066 #: analitza/analyzer.cpp:963
0067 msgctxt "QCoreApplication|"
0068 msgid "Incorrect uplimit or downlimit."
0069 msgstr "Forkert nedre eller øvre grænse."
0070
0071 #: analitza/analyzer.cpp:1055 analitza/analyzer.cpp:1080
0072 #, fuzzy, qt-format
0073 #| msgid "Incoherent type for the variable '%1'"
0074 msgctxt "QCoreApplication|"
0075 msgid "Invalid type for parameter '%1'"
0076 msgstr "Usammenhængende type for variablen \"%1\""
0077
0078 #: analitza/analyzer.cpp:1877
0079 #, fuzzy
0080 #| msgctxt "By a cycle i mean a variable that depends on itself"
0081 #| msgid "Defined a variable cycle"
0082 msgctxt "By a cycle i mean a variable that depends on itself|"
0083 msgid "Defined a variable cycle"
0084 msgstr "Definerede en selvrefererende variabel"
0085
0086 #: analitza/analyzer.cpp:1919
0087 #, fuzzy
0088 #| msgid "The result is not a number"
0089 msgctxt "QCoreApplication|"
0090 msgid "The result is not a number"
0091 msgstr "Resultatet er ikke et tal"
0092
0093 #: analitza/commands/blockmatrixcommands.cpp:44
0094 #: analitza/commands/blockmatrixcommands.cpp:234
0095 #: analitza/commands/listcommands.cpp:47 analitza/commands/listcommands.cpp:64
0096 #: analitza/commands/matrixcommands.cpp:48
0097 #: analitza/commands/matrixcommands.cpp:201
0098 #: analitza/commands/vectorcommands.cpp:45
0099 #: analitza/commands/vectorcommands.cpp:82
0100 #, fuzzy, qt-format
0101 #| msgid "Incoherent type for the variable '%1'"
0102 msgctxt "QCoreApplication|"
0103 msgid "Invalid parameter count for '%1'"
0104 msgstr "Usammenhængende type for variablen \"%1\""
0105
0106 #: analitza/commands/blockmatrixcommands.cpp:86
0107 #: analitza/commands/blockmatrixcommands.cpp:119
0108 #: analitza/commands/blockmatrixcommands.cpp:122
0109 msgctxt "QCoreApplication|"
0110 msgid "Blocks must have consistent size between each and other"
0111 msgstr ""
0112
0113 #: analitza/commands/blockmatrixcommands.cpp:90
0114 #: analitza/commands/blockmatrixcommands.cpp:126
0115 #: analitza/commands/blockmatrixcommands.cpp:263
0116 #, fuzzy
0117 #| msgid "Do not want empty vectors"
0118 msgctxt "QCoreApplication|"
0119 msgid "Do not want empty blocks"
0120 msgstr "Vil ikke have tomme vektorer"
0121
0122 #: analitza/commands/blockmatrixcommands.cpp:93
0123 #: analitza/commands/blockmatrixcommands.cpp:130
0124 #: analitza/commands/blockmatrixcommands.cpp:209
0125 #: analitza/commands/blockmatrixcommands.cpp:267
0126 msgctxt "QCoreApplication|"
0127 msgid "Blocks must be matrices"
0128 msgstr ""
0129
0130 #: analitza/commands/blockmatrixcommands.cpp:142
0131 msgctxt "QCoreApplication|"
0132 msgid "Number of blocks must be consistent"
0133 msgstr ""
0134
0135 #: analitza/commands/blockmatrixcommands.cpp:145
0136 #: analitza/commands/blockmatrixcommands.cpp:211
0137 #: analitza/commands/matrixcommands.cpp:147
0138 #, fuzzy
0139 #| msgid "Do not want empty vectors"
0140 msgctxt "QCoreApplication|"
0141 msgid "Do not want empty vectors/matrixrow elements"
0142 msgstr "Vil ikke have tomme vektorer"
0143
0144 #: analitza/commands/blockmatrixcommands.cpp:150
0145 #: analitza/commands/blockmatrixcommands.cpp:213
0146 #: analitza/commands/matrixcommands.cpp:149
0147 #, fuzzy
0148 #| msgid "Do not want empty vectors"
0149 msgctxt "QCoreApplication|"
0150 msgid "Matrix constructor needs vectors or matrixrow elements"
0151 msgstr "Vil ikke have tomme vektorer"
0152
0153 #: analitza/commands/blockmatrixcommands.cpp:244
0154 #: analitza/commands/matrixcommands.cpp:288
0155 #, qt-format
0156 msgctxt "QCoreApplication|"
0157 msgid "the arg %1 is invalid or is error"
0158 msgstr ""
0159
0160 #: analitza/commands/eigencommands.cpp:39
0161 #, fuzzy, qt-format
0162 #| msgid "Invalid parameter count for '%2'. Should have 1 parameter."
0163 #| msgid_plural "Invalid parameter count for '%2'. Should have %1 parameters."
0164 msgctxt "QCoreApplication|"
0165 msgid "Invalid parameter count for '%1'. Should have 1 parameter"
0166 msgstr "Ugyldigt antal parametre for \"%2\". Skal have 1 parameter."
0167
0168 #: analitza/commands/eigencommands.cpp:47
0169 #, qt-format
0170 msgctxt "QCoreApplication|"
0171 msgid "To use '%1' command the input matrix must be square"
0172 msgstr ""
0173
0174 #: analitza/commands/eigencommands.cpp:68
0175 #: analitza/commands/eigencommands.cpp:74
0176 #, qt-format
0177 msgctxt "QCoreApplication|"
0178 msgid ""
0179 "Invalid parameter type in matrix entry (%1,%2) for '%3', it must be a number "
0180 "value"
0181 msgstr ""
0182
0183 #: analitza/commands/eigencommands.cpp:126
0184 #: analitza/commands/eigencommands.cpp:193
0185 msgctxt "QCoreApplication|NaN means Not a Number, is an invalid float number"
0186 msgid "Returned eigenvalue is NaN"
0187 msgstr ""
0188
0189 #: analitza/commands/eigencommands.cpp:132
0190 #: analitza/commands/eigencommands.cpp:196
0191 msgctxt "QCoreApplication|"
0192 msgid "Returned eigenvalue is too big"
0193 msgstr ""
0194
0195 #: analitza/commands/matrixcommands.cpp:31
0196 msgctxt "QCoreApplication|"
0197 msgid "Matrix dimensions must be greater than zero"
0198 msgstr ""
0199
0200 #: analitza/commands/matrixcommands.cpp:122 analitza/expression.cpp:296
0201 msgctxt "QCoreApplication|"
0202 msgid "All matrixrow elements must have the same size"
0203 msgstr ""
0204
0205 #: analitza/commands/matrixcommands.cpp:127
0206 msgctxt "QCoreApplication|"
0207 msgid "Not all are rows or vectors"
0208 msgstr ""
0209
0210 #: analitza/commands/matrixcommands.cpp:143
0211 #, fuzzy
0212 #| msgid "Do not want empty vectors"
0213 msgctxt "QCoreApplication|"
0214 msgid "Every argument must be a matrixrow element"
0215 msgstr "Vil ikke have tomme vektorer"
0216
0217 #: analitza/commands/matrixcommands.cpp:241
0218 msgctxt "QCoreApplication|"
0219 msgid "The nth diagonal index must be less than the row count"
0220 msgstr ""
0221
0222 #: analitza/commands/matrixcommands.cpp:249
0223 msgctxt "QCoreApplication|"
0224 msgid "The nth diagonal index must be less than the column count"
0225 msgstr ""
0226
0227 #: analitza/commands/matrixcommands.cpp:265
0228 msgctxt "QCoreApplication|"
0229 msgid "nth diagonal index must be integer number"
0230 msgstr ""
0231
0232 #: analitza/commands/matrixcommands.cpp:269
0233 msgctxt "QCoreApplication|"
0234 msgid "nth diagonal index must be a positive integer number"
0235 msgstr ""
0236
0237 #: analitza/commands/vectorcommands.cpp:62
0238 #, fuzzy, qt-format
0239 #| msgid "Invalid parameter count for '%2'. Should have 1 parameter."
0240 #| msgid_plural "Invalid parameter count for '%2'. Should have %1 parameters."
0241 msgctxt "QCoreApplication|"
0242 msgid "Invalid parameter type for '%1', was expected a list"
0243 msgstr "Ugyldigt antal parametre for \"%2\". Skal have 1 parameter."
0244
0245 #: analitza/commands/vectorcommands.cpp:75
0246 #: analitza/commands/vectorcommands.cpp:78
0247 msgctxt "QCoreApplication|"
0248 msgid "Vector size must be some integer value greater to zero"
0249 msgstr ""
0250
0251 #: analitza/explexer.cpp:78
0252 #, fuzzy
0253 #| msgid "Unexpectedly arrived to the end of the input"
0254 msgctxt "QCoreApplication|"
0255 msgid "Unexpectedly arrived to the end of the input"
0256 msgstr "Nåede uventet til afslutningen af inputtet"
0257
0258 #: analitza/explexer.cpp:112
0259 #, fuzzy, qt-format
0260 #| msgid "Unknown token %1"
0261 msgctxt "QCoreApplication|"
0262 msgid "Unknown token %1"
0263 msgstr "Ukendt symbol %1"
0264
0265 #: analitza/expression.cpp:162
0266 #, fuzzy, qt-format
0267 #| msgid "<em>%1</em> needs at least 2 parameters"
0268 msgctxt "QCoreApplication|"
0269 msgid "<em>%1</em> needs at least 2 parameters"
0270 msgstr "<em>%1</em> behøver mindst 2 parametre"
0271
0272 #: analitza/expression.cpp:164
0273 #, fuzzy, qt-format
0274 #| msgid "<em>%1</em> requires %2 parameters"
0275 msgctxt "QCoreApplication|"
0276 msgid "<em>%1</em> requires %2 parameters"
0277 msgstr "<em>%1</em> kræver %2 parametre"
0278
0279 #: analitza/expression.cpp:171
0280 #, fuzzy, qt-format
0281 #| msgid "Missing boundary for '%1'"
0282 msgctxt "QCoreApplication|"
0283 msgid "Missing boundary for '%1'"
0284 msgstr "Manglende grænse for \"%1\""
0285
0286 #: analitza/expression.cpp:173
0287 #, fuzzy, qt-format
0288 #| msgid "Unexpected bounding for '%1'"
0289 msgctxt "QCoreApplication|"
0290 msgid "Unexpected bounding for '%1'"
0291 msgstr "Uventet grænse for \"%1\""
0292
0293 #: analitza/expression.cpp:178
0294 #, fuzzy, qt-format
0295 #| msgid "<em>%1</em> missing bounds on '%2'"
0296 msgctxt "QCoreApplication|"
0297 msgid "<em>%1</em> missing bounds on '%2'"
0298 msgstr "<em>%1</em> manglende grænser for \"%2\""
0299
0300 #: analitza/expression.cpp:200
0301 #, fuzzy
0302 #| msgid "Wrong declare"
0303 msgctxt "QCoreApplication|"
0304 msgid "Wrong declare"
0305 msgstr "Forkert erklæring"
0306
0307 #: analitza/expression.cpp:210
0308 #, fuzzy, qt-format
0309 #| msgid "Empty container: %1"
0310 msgctxt "QCoreApplication|"
0311 msgid "Empty container: %1"
0312 msgstr "Tom beholder: %1"
0313
0314 #: analitza/expression.cpp:228
0315 #, fuzzy
0316 #| msgctxt "there was a conditional outside a condition structure"
0317 #| msgid "We can only have conditionals inside piecewise structures."
0318 msgctxt "there was a conditional outside a condition structure|"
0319 msgid "We can only have conditionals inside piecewise structures."
0320 msgstr "Betingelser er kun tilladt i afsnitsvise strukturer."
0321
0322 #: analitza/expression.cpp:244
0323 #, fuzzy, qt-format
0324 #| msgid "Cannot have two parameters with the same name like '%1'."
0325 msgctxt "QCoreApplication|"
0326 msgid "Cannot have two parameters with the same name like '%1'."
0327 msgstr "Kan ikke have to parametre med samme navn såsom \"%1\"."
0328
0329 #: analitza/expression.cpp:259
0330 #, fuzzy
0331 #| msgctxt ""
0332 #| "this is an error message. otherwise is the else in a mathml condition"
0333 #| msgid "The <em>otherwise</em> parameter should be the last one"
0334 msgctxt ""
0335 "this is an error message. otherwise is the else in a mathml condition|"
0336 msgid "The <em>otherwise</em> parameter should be the last one"
0337 msgstr "Parametret <em>otherwise</em> skal være det sidste"
0338
0339 #: analitza/expression.cpp:267
0340 #, fuzzy, qt-format
0341 #| msgctxt "there was an element that was not a conditional inside a condition"
0342 #| msgid "%1 is not a proper condition inside the piecewise"
0343 msgctxt "there was an element that was not a conditional inside a condition|"
0344 msgid "%1 is not a proper condition inside the piecewise"
0345 msgstr "%1 er ikke en gyldig betingelse indeni den afsnitsvise struktur"
0346
0347 #: analitza/expression.cpp:273
0348 #, fuzzy
0349 #| msgid "We can only declare variables"
0350 msgctxt "QCoreApplication|"
0351 msgid "We can only declare variables"
0352 msgstr "Kun variabler kan erklæres"
0353
0354 #: analitza/expression.cpp:279
0355 #, fuzzy
0356 #| msgid "We can only have bounded variables"
0357 msgctxt "QCoreApplication|"
0358 msgid "We can only have bounded variables"
0359 msgstr "Der kan kun sættes grænser for variabler"
0360
0361 #: analitza/expression.cpp:290 analitza/expression.cpp:495
0362 #, fuzzy
0363 #| msgid "Do not want empty vectors"
0364 msgctxt "QCoreApplication|"
0365 msgid "Do not want empty matrixrow elements"
0366 msgstr "Vil ikke have tomme vektorer"
0367
0368 #: analitza/expression.cpp:300
0369 msgctxt "QCoreApplication|"
0370 msgid "The matrix must contain only matrixrow elements"
0371 msgstr ""
0372
0373 #: analitza/expression.cpp:419
0374 #, fuzzy, qt-format
0375 #| msgid "Error while parsing: %1"
0376 msgctxt "QCoreApplication|"
0377 msgid "Error while parsing: %1"
0378 msgstr "Fejl under fortolkning: %1"
0379
0380 #: analitza/expression.cpp:450
0381 #, fuzzy, qt-format
0382 #| msgctxt "An error message"
0383 #| msgid "Container unknown: %1"
0384 msgctxt "An error message|"
0385 msgid "Container unknown: %1"
0386 msgstr "Ukendt beholder: %1"
0387
0388 #: analitza/expression.cpp:456
0389 #, fuzzy, qt-format
0390 #| msgid "Cannot codify the %1 value."
0391 msgctxt "QCoreApplication|"
0392 msgid "Cannot codify the %1 value."
0393 msgstr "Kan ikke kodificere værdien %1."
0394
0395 #: analitza/expression.cpp:462
0396 #, fuzzy, qt-format
0397 #| msgid "The %1 operator cannot have child contexts."
0398 msgctxt "QCoreApplication|"
0399 msgid "The %1 operator cannot have child contexts."
0400 msgstr "Operatoren %1 kan ikke have underkontekster."
0401
0402 #: analitza/expression.cpp:466
0403 #, fuzzy, qt-format
0404 #| msgid "The element '%1' is not an operator."
0405 msgctxt "QCoreApplication|"
0406 msgid "The element '%1' is not an operator."
0407 msgstr "Elementet \"%1\" er ikke en operator."
0408
0409 #: analitza/expression.cpp:479
0410 #, fuzzy
0411 #| msgid "Do not want empty vectors"
0412 msgctxt "QCoreApplication|"
0413 msgid "Do not want empty vectors"
0414 msgstr "Vil ikke have tomme vektorer"
0415
0416 #: analitza/expression.cpp:489
0417 #, fuzzy
0418 #| msgid "Do not want empty vectors"
0419 msgctxt "QCoreApplication|"
0420 msgid "Do not want empty matrices"
0421 msgstr "Vil ikke have tomme vektorer"
0422
0423 #: analitza/expression.cpp:508
0424 #, fuzzy, qt-format
0425 #| msgctxt "Error message due to an unrecognized input"
0426 #| msgid "Not supported/unknown: %1"
0427 msgctxt "Error message due to an unrecognized input|"
0428 msgid "Not supported/unknown: %1"
0429 msgstr "Ikke understøttet/ukendt: %1"
0430
0431 #: analitza/expressionparser.cpp:296
0432 #, fuzzy
0433 #| msgid ", "
0434 msgctxt "QCoreApplication|"
0435 msgid ", "
0436 msgstr ", "
0437
0438 #: analitza/expressionparser.cpp:296
0439 #, fuzzy, qt-format
0440 #| msgctxt "error message"
0441 #| msgid "Expected %1 instead of '%2'"
0442 msgctxt "error message|"
0443 msgid "Expected %1 instead of '%2'"
0444 msgstr "Forventede %1 i stedet for %2"
0445
0446 #: analitza/expressionparser.cpp:298
0447 #, fuzzy
0448 #| msgid "Missing right parenthesis"
0449 msgctxt "QCoreApplication|"
0450 msgid "Missing right parenthesis"
0451 msgstr "Mangler højre parentes"
0452
0453 #: analitza/expressionparser.cpp:300
0454 #, fuzzy
0455 #| msgid "Unbalanced right parenthesis"
0456 msgctxt "QCoreApplication|"
0457 msgid "Unbalanced right parenthesis"
0458 msgstr "Ikke-afbalanceret højre parentes"
0459
0460 #: analitza/expressionparser.cpp:303
0461 #, fuzzy, qt-format
0462 #| msgid "Unexpected token identifier: %1"
0463 msgctxt "QCoreApplication|"
0464 msgid "Unexpected token identifier: %1"
0465 msgstr "Uventet symbolidentifikator: %1"
0466
0467 #: analitza/expressionparser.cpp:305
0468 #, fuzzy, qt-format
0469 #| msgid "Unexpected token %1"
0470 msgctxt "QCoreApplication|"
0471 msgid "Unexpected token %1"
0472 msgstr "Uventet symbol %1"
0473
0474 #: analitza/expressiontypechecker.cpp:301
0475 #, fuzzy, qt-format
0476 #| msgid "Could not find a type that unifies '%1'"
0477 msgctxt "QCoreApplication|"
0478 msgid "Could not find a type that unifies '%1'"
0479 msgstr "Kunne ikke finde en type der forener \"%1\""
0480
0481 #: analitza/expressiontypechecker.cpp:473
0482 #, fuzzy
0483 #| msgid "The domain should be either a vector or a list"
0484 msgctxt "QCoreApplication|"
0485 msgid "The domain should be either a vector or a list"
0486 msgstr "Domænet skal enten være en vektor eller en liste"
0487
0488 #: analitza/expressiontypechecker.cpp:558
0489 #, fuzzy, qt-format
0490 #| msgid "Could not call '%1'"
0491 msgctxt "type error message|"
0492 msgid "Cannot call '%1'"
0493 msgstr "Kunne ikke kalde \"%1\""
0494
0495 #: analitza/expressiontypechecker.cpp:593
0496 #, qt-format
0497 msgctxt "QCoreApplication|"
0498 msgid "Cannot reduce '%1' to '%2'. Invalid type of parameter '%3' for '%4'"
0499 msgstr ""
0500
0501 #: analitza/expressiontypechecker.cpp:604
0502 #, fuzzy, qt-format
0503 #| msgid "Invalid parameter count for '%2'. Should have 1 parameter."
0504 #| msgid_plural "Invalid parameter count for '%2'. Should have %1 parameters."
0505 msgctxt "QCoreApplication|"
0506 msgid "Invalid parameter count for '%2'. Should have %1 parameters."
0507 msgstr "Ugyldigt antal parametre for \"%2\". Skal have 1 parameter."
0508
0509 #: analitza/expressiontypechecker.cpp:616
0510 #, qt-format
0511 msgctxt "QCoreApplication|"
0512 msgid "Cannot compare '%1' to '%2'. Invalid type of parameter '%3' for '%4'"
0513 msgstr ""
0514
0515 #: analitza/expressiontypechecker.cpp:654
0516 #, fuzzy, qt-format
0517 #| msgid "Could not call '%1'"
0518 msgctxt "QCoreApplication|"
0519 msgid "Could not call '%1'"
0520 msgstr "Kunne ikke kalde \"%1\""
0521
0522 #: analitza/expressiontypechecker.cpp:662
0523 #, fuzzy, qt-format
0524 #| msgid "Could not solve '%1'"
0525 msgctxt "QCoreApplication|"
0526 msgid "Could not solve '%1'"
0527 msgstr "Kunne ikke løse \"%1\""
0528
0529 #: analitza/expressiontypechecker.cpp:695
0530 #, fuzzy, qt-format
0531 #| msgid "Incoherent type for the variable '%1'"
0532 msgctxt "QCoreApplication|"
0533 msgid "Incoherent type for the variable '%1'"
0534 msgstr "Usammenhængende type for variablen \"%1\""
0535
0536 #: analitza/expressiontypechecker.cpp:718
0537 #, fuzzy
0538 #| msgid "Could not determine the type for piecewise"
0539 msgctxt "QCoreApplication|"
0540 msgid "Could not determine the type for piecewise"
0541 msgstr "Kunne ikke bestemme typen for afsnitsvis"
0542
0543 #: analitza/expressiontypechecker.cpp:937
0544 #, fuzzy
0545 #| msgid "Unexpected type"
0546 msgctxt "QCoreApplication|"
0547 msgid "Unexpected type"
0548 msgstr "Uventet type"
0549
0550 #: analitza/expressiontypechecker.cpp:960
0551 #, fuzzy, qt-format
0552 #| msgid "Cannot convert '%1' to '%2'"
0553 msgctxt "QCoreApplication|"
0554 msgid "Cannot convert '%1' to '%2'"
0555 msgstr "Kan ikke konvertere \"%1\" til \"%2\""
0556
0557 #: analitza/htmlexpressionwriter.cpp:54 analitza/htmlexpressionwriter.cpp:55
0558 #, fuzzy, qt-format
0559 #| msgctxt "html representation of an operator"
0560 #| msgid "<span class='op'>%1</span>"
0561 msgctxt "html representation of an operator|"
0562 msgid "<span class='op'>%1</span>"
0563 msgstr "<span class='op'>%1</span>"
0564
0565 #: analitza/htmlexpressionwriter.cpp:56
0566 #, fuzzy, qt-format
0567 #| msgctxt "html representation of an operator"
0568 #| msgid "<span class='keyword'>%1</span>"
0569 msgctxt "html representation of an operator|"
0570 msgid "<span class='keyword'>%1</span>"
0571 msgstr "<span class='keyword'>%1</span>"
0572
0573 #: analitza/mathmlpresentationlexer.cpp:94
0574 #, fuzzy, qt-format
0575 #| msgctxt "Error message"
0576 #| msgid "Unknown token '%1'"
0577 msgctxt "Error message|"
0578 msgid "Unknown token '%1'"
0579 msgstr "Ukendt symbol \"%1\""
0580
0581 #: analitza/operations.cpp:54 analitza/operations.cpp:191
0582 #, fuzzy
0583 #| msgid "Cannot divide by 0."
0584 msgctxt "QCoreApplication|"
0585 msgid "Cannot divide by 0."
0586 msgstr "Kan ikke dividere med 0."
0587
0588 #: analitza/operations.cpp:72 analitza/operations.cpp:203
0589 #, fuzzy
0590 #| msgid "Cannot calculate the remainder on 0."
0591 msgctxt "QCoreApplication|"
0592 msgid "Cannot calculate the remainder on 0."
0593 msgstr "Kan ikke udregne resten for 0."
0594
0595 #: analitza/operations.cpp:84 analitza/operations.cpp:213
0596 #, fuzzy
0597 #| msgid "Cannot calculate the factor on 0."
0598 msgctxt "QCoreApplication|"
0599 msgid "Cannot calculate the factor on 0."
0600 msgstr "Kan ikke udregne faktoren for 0."
0601
0602 #: analitza/operations.cpp:140 analitza/operations.cpp:261
0603 #, fuzzy
0604 #| msgid "Cannot calculate the lcm of 0."
0605 msgctxt "QCoreApplication|"
0606 msgid "Cannot calculate the lcm of 0."
0607 msgstr "Kan ikke udregne lcm for 0."
0608
0609 #: analitza/operations.cpp:246
0610 msgctxt "QCoreApplication|"
0611 msgid "Boolean operations on complex numbers not available"
0612 msgstr ""
0613
0614 #: analitza/operations.cpp:276
0615 msgctxt "QCoreApplication|"
0616 msgid "Only square root implemented for complex numbers"
0617 msgstr ""
0618
0619 #: analitza/operations.cpp:351 analitza/operations.cpp:463
0620 #, fuzzy, qt-format
0621 #| msgid "Could not calculate a value %1"
0622 msgctxt "QCoreApplication|"
0623 msgid "Could not calculate a value %1"
0624 msgstr "Kunne ikke udregne værdien af %1"
0625
0626 #: analitza/operations.cpp:479
0627 #, fuzzy, qt-format
0628 #| msgid "Cannot calculate the remainder on 0."
0629 msgctxt "QCoreApplication|"
0630 msgid "Cannot calculate %1 between a value and an error type"
0631 msgstr "Kan ikke udregne resten for 0."
0632
0633 #: analitza/operations.cpp:495 analitza/operations.cpp:652
0634 #: analitza/operations.cpp:784
0635 #, fuzzy
0636 #| msgid "Invalid index for a container"
0637 msgctxt "QCoreApplication|"
0638 msgid "Invalid index for a container"
0639 msgstr "Ugyldigt indeks i en beholder"
0640
0641 #: analitza/operations.cpp:527
0642 #, fuzzy, qt-format
0643 #| msgid "Cannot operate on different sized vectors."
0644 msgctxt "QCoreApplication|"
0645 msgid "Cannot operate '%1' on different sized vectors."
0646 msgstr "Kan ikke behandle vektorer af forskellig størrelse."
0647
0648 #: analitza/operations.cpp:566
0649 msgctxt "QCoreApplication|"
0650 msgid ""
0651 "Multiplication between a matrix and a vector is allowed provided that the "
0652 "number of columns of the matrix equals the size of the vector"
0653 msgstr ""
0654
0655 #: analitza/operations.cpp:570 analitza/operations.cpp:707
0656 msgctxt "QCoreApplication|"
0657 msgid "Matrix and vector entries must be numbers"
0658 msgstr ""
0659
0660 #: analitza/operations.cpp:599
0661 #, fuzzy, qt-format
0662 #| msgid "Could not calculate a vector's %1"
0663 msgctxt "QCoreApplication|"
0664 msgid "Could not calculate a vector's %1"
0665 msgstr "Kunne ikke beregne %1 for en vektor"
0666
0667 #: analitza/operations.cpp:621 analitza/operations.cpp:637
0668 #, fuzzy, qt-format
0669 #| msgid "Could not calculate a list's %1"
0670 msgctxt "QCoreApplication|"
0671 msgid "Could not calculate a list's %1"
0672 msgstr "Kunne ikke beregne %1 for en liste"
0673
0674 #: analitza/operations.cpp:703
0675 msgctxt "QCoreApplication|"
0676 msgid ""
0677 "Multiplication between a vector and a matrix is allowed provided that the "
0678 "matrix has only one matrixrow element"
0679 msgstr ""
0680
0681 #: analitza/operations.cpp:730
0682 msgctxt "QCoreApplication|"
0683 msgid ""
0684 "Addition of two matrices is allowed provided that both matrices have the "
0685 "same number of rows and the same number of columns"
0686 msgstr ""
0687
0688 #: analitza/operations.cpp:762
0689 msgctxt "QCoreApplication|"
0690 msgid ""
0691 "Multiplication of two matrices is allowed provided that the number of "
0692 "columns of the first matrix equals the number of rows of the second matrix"
0693 msgstr ""
0694
0695 #: analitza/operations.cpp:766 analitza/operations.cpp:804
0696 #: analitza/operations.cpp:887
0697 msgctxt "QCoreApplication|"
0698 msgid "Matrix entries must be numbers"
0699 msgstr ""
0700
0701 #: analitza/operations.cpp:879
0702 msgctxt "QCoreApplication|"
0703 msgid "The exponent of 'power' must be some integer number"
0704 msgstr ""
0705
0706 #: analitza/operations.cpp:883
0707 msgctxt "QCoreApplication|"
0708 msgid "Cannot compute 'power' for non square matrix"
0709 msgstr ""
0710
0711 #: analitza/operations.cpp:922
0712 #, fuzzy, qt-format
0713 #| msgid "Cannot calculate the remainder on 0."
0714 msgctxt "QCoreApplication|"
0715 msgid "Cannot calculate %1 between a matrix and an error type"
0716 msgstr "Kan ikke udregne resten for 0."
0717
0718 #: analitza/providederivative.cpp:93
0719 #, fuzzy, qt-format
0720 #| msgid "Could not calculate the derivative for '%1'"
0721 msgctxt "QCoreApplication|"
0722 msgid "Could not calculate the derivative for '%1'"
0723 msgstr "Kunne ikke udregne den afledte værdi for \"%1\""
0724
0725 #: analitzagui/operatorsmodel.cpp:95 analitzagui/variablesmodel.cpp:91
0726 #: analitzaplot/plotsdictionarymodel.cpp:36 analitzaplot/plotsmodel.cpp:78
0727 msgctxt "@title:column|"
0728 msgid "Name"
0729 msgstr "Navn"
0730
0731 #: analitzagui/operatorsmodel.cpp:98
0732 msgctxt "@title:column|"
0733 msgid "Description"
0734 msgstr "Beskrivelse"
0735
0736 #: analitzagui/operatorsmodel.cpp:101
0737 msgctxt "@title:column|"
0738 msgid "Parameters"
0739 msgstr "Parametre"
0740
0741 #: analitzagui/operatorsmodel.cpp:104
0742 msgctxt "@title:column|"
0743 msgid "Example"
0744 msgstr "Eksempel"
0745
0746 #: analitzagui/operatorsmodel.cpp:135
0747 msgctxt "Syntax for function bounding|"
0748 msgid " : var"
0749 msgstr " : var"
0750
0751 #: analitzagui/operatorsmodel.cpp:137
0752 msgctxt "Syntax for function bounding values|"
0753 msgid "=from..to"
0754 msgstr "=fra..til"
0755
0756 #: analitzagui/operatorsmodel.cpp:140
0757 #, qt-format
0758 msgctxt "QCoreApplication|"
0759 msgid "%1("
0760 msgstr "%1("
0761
0762 #: analitzagui/operatorsmodel.cpp:143
0763 #, qt-format
0764 msgctxt "QCoreApplication|"
0765 msgid "%1... parameters, ...%2)"
0766 msgstr "%1... parametre, ...%2)"
0767
0768 #: analitzagui/operatorsmodel.cpp:146
0769 #, qt-format
0770 msgctxt "QCoreApplication|"
0771 msgid "par%1"
0772 msgstr "par%1"
0773
0774 #: analitzagui/operatorsmodel.cpp:159
0775 msgctxt "QCoreApplication|"
0776 msgid "Addition"
0777 msgstr "Addition"
0778
0779 #: analitzagui/operatorsmodel.cpp:162
0780 msgctxt "QCoreApplication|"
0781 msgid "Multiplication"
0782 msgstr "Multiplikation"
0783
0784 #: analitzagui/operatorsmodel.cpp:165
0785 msgctxt "QCoreApplication|"
0786 msgid "Division"
0787 msgstr "Division"
0788
0789 #: analitzagui/operatorsmodel.cpp:168
0790 msgctxt "QCoreApplication|"
0791 msgid "Subtraction. Will remove all values from the first one."
0792 msgstr "Subtraktion. Vil fjerne alle værdier fra den første."
0793
0794 #: analitzagui/operatorsmodel.cpp:171
0795 msgctxt "QCoreApplication|"
0796 msgid "Power"
0797 msgstr "Potens"
0798
0799 #: analitzagui/operatorsmodel.cpp:174
0800 msgctxt "QCoreApplication|"
0801 msgid "Remainder"
0802 msgstr "Rest"
0803
0804 #: analitzagui/operatorsmodel.cpp:177
0805 msgctxt "QCoreApplication|"
0806 msgid "Quotient"
0807 msgstr "Kvotient"
0808
0809 #: analitzagui/operatorsmodel.cpp:180
0810 msgctxt "QCoreApplication|"
0811 msgid "The factor of"
0812 msgstr "Faktor af"
0813
0814 #: analitzagui/operatorsmodel.cpp:183
0815 msgctxt "QCoreApplication|"
0816 msgid "Factorial. factorial(n)=n!"
0817 msgstr "Fakultet. fakultet(n)=n!"
0818
0819 #: analitzagui/operatorsmodel.cpp:186
0820 msgctxt "QCoreApplication|"
0821 msgid "Function to calculate the sine of a given angle"
0822 msgstr "Funktion til at beregne sinus af en given vinkel"
0823
0824 #: analitzagui/operatorsmodel.cpp:189
0825 msgctxt "QCoreApplication|"
0826 msgid "Function to calculate the cosine of a given angle"
0827 msgstr "Funktion til at beregne cosinus af en given vinkel"
0828
0829 #: analitzagui/operatorsmodel.cpp:192
0830 msgctxt "QCoreApplication|"
0831 msgid "Function to calculate the tangent of a given angle"
0832 msgstr "Funktion til at beregne tangens af en given vinkel"
0833
0834 #: analitzagui/operatorsmodel.cpp:195
0835 msgctxt "QCoreApplication|"
0836 msgid "Secant"
0837 msgstr "Sekant"
0838
0839 #: analitzagui/operatorsmodel.cpp:198
0840 msgctxt "QCoreApplication|"
0841 msgid "Cosecant"
0842 msgstr "Cosekant"
0843
0844 #: analitzagui/operatorsmodel.cpp:201
0845 msgctxt "QCoreApplication|"
0846 msgid "Cotangent"
0847 msgstr "Cotangens"
0848
0849 #: analitzagui/operatorsmodel.cpp:204
0850 msgctxt "QCoreApplication|"
0851 msgid "Hyperbolic sine"
0852 msgstr "Hyperbolsk sinus"
0853
0854 #: analitzagui/operatorsmodel.cpp:207
0855 msgctxt "QCoreApplication|"
0856 msgid "Hyperbolic cosine"
0857 msgstr "Hyperbolsk cosinus"
0858
0859 #: analitzagui/operatorsmodel.cpp:210
0860 msgctxt "QCoreApplication|"
0861 msgid "Hyperbolic tangent"
0862 msgstr "Hyperbolsk tangens"
0863
0864 #: analitzagui/operatorsmodel.cpp:213
0865 msgctxt "QCoreApplication|"
0866 msgid "Hyperbolic secant"
0867 msgstr "Hyberbolsk sekant"
0868
0869 #: analitzagui/operatorsmodel.cpp:216
0870 msgctxt "QCoreApplication|"
0871 msgid "Hyperbolic cosecant"
0872 msgstr "Hyperbolsk cosekant"
0873
0874 #: analitzagui/operatorsmodel.cpp:219
0875 msgctxt "QCoreApplication|"
0876 msgid "Hyperbolic cotangent"
0877 msgstr "Hyperbolsk cotangens"
0878
0879 #: analitzagui/operatorsmodel.cpp:222
0880 msgctxt "QCoreApplication|"
0881 msgid "Arc sine"
0882 msgstr "Arcsinus"
0883
0884 #: analitzagui/operatorsmodel.cpp:225
0885 msgctxt "QCoreApplication|"
0886 msgid "Arc cosine"
0887 msgstr "Arccosinus"
0888
0889 #: analitzagui/operatorsmodel.cpp:228
0890 msgctxt "QCoreApplication|"
0891 msgid "Arc tangent"
0892 msgstr "Arctangens"
0893
0894 #: analitzagui/operatorsmodel.cpp:231
0895 msgctxt "QCoreApplication|"
0896 msgid "Arc cotangent"
0897 msgstr "Invers cotangens"
0898
0899 #: analitzagui/operatorsmodel.cpp:237
0900 msgctxt "QCoreApplication|"
0901 msgid "Hyperbolic arc tangent"
0902 msgstr "Invers hyperbolsk tangens"
0903
0904 #: analitzagui/operatorsmodel.cpp:240
0905 msgctxt "QCoreApplication|"
0906 msgid "Summatory"
0907 msgstr ""
0908
0909 #: analitzagui/operatorsmodel.cpp:243
0910 #, fuzzy
0911 #| msgid "Productory"
0912 msgctxt "QCoreApplication|"
0913 msgid "Productory"
0914 msgstr "Produkt"
0915
0916 #: analitzagui/operatorsmodel.cpp:246
0917 msgctxt "QCoreApplication|"
0918 msgid "For all"
0919 msgstr "For alle"
0920
0921 #: analitzagui/operatorsmodel.cpp:249
0922 msgctxt "QCoreApplication|"
0923 msgid "Exists"
0924 msgstr "Findes"
0925
0926 #: analitzagui/operatorsmodel.cpp:252
0927 msgctxt "QCoreApplication|"
0928 msgid "Differentiation"
0929 msgstr "Differentiering"
0930
0931 #: analitzagui/operatorsmodel.cpp:255
0932 msgctxt "QCoreApplication|"
0933 msgid "Hyperbolic arc sine"
0934 msgstr "Invers hyperbolsk sinus"
0935
0936 #: analitzagui/operatorsmodel.cpp:258
0937 msgctxt "QCoreApplication|"
0938 msgid "Hyperbolic arc cosine"
0939 msgstr "Invers hyperbolsk cosinus"
0940
0941 #: analitzagui/operatorsmodel.cpp:261
0942 msgctxt "QCoreApplication|"
0943 msgid "Arc cosecant"
0944 msgstr "Invers cosekant"
0945
0946 #: analitzagui/operatorsmodel.cpp:264
0947 msgctxt "QCoreApplication|"
0948 msgid "Hyperbolic arc cosecant"
0949 msgstr "Invers hyperbolsk cosekant"
0950
0951 #: analitzagui/operatorsmodel.cpp:267
0952 msgctxt "QCoreApplication|"
0953 msgid "Arc secant"
0954 msgstr "Invers sekant"
0955
0956 #: analitzagui/operatorsmodel.cpp:270
0957 msgctxt "QCoreApplication|"
0958 msgid "Hyperbolic arc secant"
0959 msgstr "Invers hyperbolsk sekant"
0960
0961 #: analitzagui/operatorsmodel.cpp:273
0962 msgctxt "QCoreApplication|"
0963 msgid "Exponent (e^x)"
0964 msgstr "Eksponent (e^x)"
0965
0966 #: analitzagui/operatorsmodel.cpp:276
0967 msgctxt "QCoreApplication|"
0968 msgid "Base-e logarithm"
0969 msgstr "Naturlig logaritme"
0970
0971 #: analitzagui/operatorsmodel.cpp:279
0972 msgctxt "QCoreApplication|"
0973 msgid "Base-10 logarithm"
0974 msgstr "10-talslogaritme"
0975
0976 #: analitzagui/operatorsmodel.cpp:282
0977 msgctxt "QCoreApplication|"
0978 msgid "Absolute value. abs(n)=|n|"
0979 msgstr "Absolut værdi. abs(n)=|n|"
0980
0981 #: analitzagui/operatorsmodel.cpp:285
0982 msgctxt "QCoreApplication|"
0983 msgid "Conjugate"
0984 msgstr ""
0985
0986 #: analitzagui/operatorsmodel.cpp:288
0987 msgctxt "QCoreApplication|"
0988 msgid "Arg"
0989 msgstr ""
0990
0991 #: analitzagui/operatorsmodel.cpp:291
0992 msgctxt "QCoreApplication|"
0993 msgid "Real"
0994 msgstr ""
0995
0996 #: analitzagui/operatorsmodel.cpp:294
0997 msgctxt "QCoreApplication|"
0998 msgid "Imaginary"
0999 msgstr ""
1000
1001 #: analitzagui/operatorsmodel.cpp:297
1002 msgctxt "QCoreApplication|"
1003 msgid "Floor value. floor(n)=⌊n⌋"
1004 msgstr "Rund ned. floor(n)=⌊n⌋"
1005
1006 #: analitzagui/operatorsmodel.cpp:300
1007 msgctxt "QCoreApplication|"
1008 msgid "Ceil value. ceil(n)=⌈n⌉"
1009 msgstr "Rund op. ceil(n)=⌈n⌉"
1010
1011 #: analitzagui/operatorsmodel.cpp:303
1012 msgctxt "QCoreApplication|"
1013 msgid "Minimum"
1014 msgstr "Minimum"
1015
1016 #: analitzagui/operatorsmodel.cpp:306
1017 msgctxt "QCoreApplication|"
1018 msgid "Maximum"
1019 msgstr "Maksimum"
1020
1021 #: analitzagui/operatorsmodel.cpp:309
1022 msgctxt "QCoreApplication|"
1023 msgid "Greater than. gt(a,b)=a>b"
1024 msgstr "Større end. gt(a,b)=a>b"
1025
1026 #: analitzagui/operatorsmodel.cpp:312
1027 msgctxt "QCoreApplication|"
1028 msgid "Less than. lt(a,b)=a<b"
1029 msgstr "Mindre end. lt(a,b)=a<b"
1030
1031 #: analitzagui/operatorsmodel.cpp:315
1032 msgctxt "QCoreApplication|"
1033 msgid "Equal. eq(a,b) = a=b"
1034 msgstr "Lig med. eq(a,b) = a=b"
1035
1036 #: analitzagui/operatorsmodel.cpp:318
1037 msgctxt "QCoreApplication|"
1038 msgid "Approximation. approx(a)=a±n"
1039 msgstr "Approksimation. approx(a)=a±n"
1040
1041 #: analitzagui/operatorsmodel.cpp:321
1042 msgctxt "QCoreApplication|"
1043 msgid "Not equal. neq(a,b)=a≠b"
1044 msgstr "Ikke lig med. neq(a,b)=a≠b"
1045
1046 #: analitzagui/operatorsmodel.cpp:324
1047 msgctxt "QCoreApplication|"
1048 msgid "Greater or equal. geq(a,b)=a≥b"
1049 msgstr "Større end eller lig med. geq(a,b)=a≥b"
1050
1051 #: analitzagui/operatorsmodel.cpp:327
1052 msgctxt "QCoreApplication|"
1053 msgid "Less or equal. leq(a,b)=a≤b"
1054 msgstr "Mindre end eller lig med. leq(a,b)=a≤b"
1055
1056 #: analitzagui/operatorsmodel.cpp:330
1057 msgctxt "QCoreApplication|"
1058 msgid "Boolean and"
1059 msgstr "Boolesk and"
1060
1061 #: analitzagui/operatorsmodel.cpp:333
1062 msgctxt "QCoreApplication|"
1063 msgid "Boolean not"
1064 msgstr "Boolesk not"
1065
1066 #: analitzagui/operatorsmodel.cpp:336
1067 msgctxt "QCoreApplication|"
1068 msgid "Boolean or"
1069 msgstr "Boolesk or"
1070
1071 #: analitzagui/operatorsmodel.cpp:339
1072 msgctxt "QCoreApplication|"
1073 msgid "Boolean xor"
1074 msgstr "Boolesk xor"
1075
1076 #: analitzagui/operatorsmodel.cpp:342
1077 msgctxt "QCoreApplication|"
1078 msgid "Boolean implication"
1079 msgstr "Boolesk implikation"
1080
1081 #: analitzagui/operatorsmodel.cpp:345
1082 msgctxt "QCoreApplication|"
1083 msgid "Greatest common divisor"
1084 msgstr "Største fælles divisor"
1085
1086 #: analitzagui/operatorsmodel.cpp:348
1087 msgctxt "QCoreApplication|"
1088 msgid "Least common multiple"
1089 msgstr "Mindste fælles multiplum"
1090
1091 #: analitzagui/operatorsmodel.cpp:351
1092 msgctxt "QCoreApplication|"
1093 msgid "Root"
1094 msgstr "Rod"
1095
1096 #: analitzagui/operatorsmodel.cpp:354
1097 msgctxt "QCoreApplication|"
1098 msgid "Cardinal"
1099 msgstr "Mængdetal"
1100
1101 #: analitzagui/operatorsmodel.cpp:357
1102 msgctxt "QCoreApplication|"
1103 msgid "Scalar product"
1104 msgstr "Skalar-produkt"
1105
1106 #: analitzagui/operatorsmodel.cpp:360
1107 msgctxt "QCoreApplication|"
1108 msgid "Select the par1-th element of par2 list or vector"
1109 msgstr "Vælg par1-th-elementet af par2-liste eller vektor"
1110
1111 #: analitzagui/operatorsmodel.cpp:363
1112 msgctxt "QCoreApplication|"
1113 msgid "Joins several items of the same type"
1114 msgstr "Forener elementer af samme type"
1115
1116 #: analitzagui/operatorsmodel.cpp:366
1117 msgctxt "QCoreApplication|"
1118 msgid "Applies a function to every element in a list"
1119 msgstr "Anvender en funktion på hvert element i en liste"
1120
1121 #: analitzagui/operatorsmodel.cpp:369
1122 msgctxt "QCoreApplication|"
1123 msgid "Removes all elements that don't fit a condition"
1124 msgstr "Fjerner alle elementer som ikke opfylder en betingelse"
1125
1126 #: analitzagui/operatorsmodel.cpp:372
1127 msgctxt "QCoreApplication|"
1128 msgid "Transpose"
1129 msgstr "Transponér"
1130
1131 #: analitzagui/operatorsmodel.cpp:572
1132 #, qt-format
1133 msgctxt "n-ary function prototype|"
1134 msgid "<em>%1</em>(..., <b>par%2</b>, ...)"
1135 msgstr "<em>%1</em>(..., <b>par%2</b>, ...)"
1136
1137 #: analitzagui/operatorsmodel.cpp:582
1138 #, qt-format
1139 msgctxt "Function name in function prototype|"
1140 msgid "<em>%1</em>("
1141 msgstr "<em>%1</em>("
1142
1143 #: analitzagui/operatorsmodel.cpp:583
1144 #, qt-format
1145 msgctxt "Uncorrect function name in function prototype|"
1146 msgid "<em style='color:red'><b>%1</b></em>("
1147 msgstr "<em style='color:red'><b>%1</b></em>("
1148
1149 #: analitzagui/operatorsmodel.cpp:586
1150 #, qt-format
1151 msgctxt "Parameter in function prototype|"
1152 msgid "par%1"
1153 msgstr "par%1"
1154
1155 #: analitzagui/operatorsmodel.cpp:589 analitzagui/operatorsmodel.cpp:599
1156 #, qt-format
1157 msgctxt "Current parameter in function prototype|"
1158 msgid "<b>%1</b>"
1159 msgstr "<b>%1</b>"
1160
1161 #: analitzagui/operatorsmodel.cpp:592
1162 msgctxt "Function parameter separator|"
1163 msgid ", "
1164 msgstr ", "
1165
1166 #: analitzagui/operatorsmodel.cpp:596
1167 msgctxt "Current parameter is the bounding|"
1168 msgid " : bounds"
1169 msgstr " : grænser"
1170
1171 #: analitzagui/variablesmodel.cpp:94
1172 msgctxt "@title:column|"
1173 msgid "Value"
1174 msgstr "Værdi"
1175
1176 #: analitzaplot/plotsfactory.cpp:49
1177 msgctxt "QCoreApplication|"
1178 msgid "The expression is not correct"
1179 msgstr "Udtrykket er ikke korrekt"
1180
1181 #: analitzaplot/plotsfactory.cpp:72
1182 #, fuzzy, qt-format
1183 #| msgctxt "QCoreApplication|"
1184 #| msgid "Function type not recognized"
1185 msgctxt "QCoreApplication|"
1186 msgid "Function type '%1' not recognized"
1187 msgstr "Funktionstype ikke genkendt"
1188
1189 #: analitzaplot/plotsfactory.cpp:74
1190 #, fuzzy, qt-format
1191 #| msgctxt "QCoreApplication|"
1192 #| msgid "Function type not recognized"
1193 msgctxt "QCoreApplication|"
1194 msgid "Function '%1' not recognized"
1195 msgstr "Funktionstype ikke genkendt"
1196
1197 #: analitzaplot/plotsmodel.cpp:79
1198 msgctxt "@title:column|"
1199 msgid "Plot"
1200 msgstr "Plot"
1201
1202 #: analitzaplot/plotter3d_es.cpp:534 declarative/graph2dmobile.cpp:141
1203 msgctxt "QObject|"
1204 msgid "PNG Image (*.png)"
1205 msgstr ""
1206
1207 #: analitzaplot/plotter3d_es.cpp:534
1208 msgctxt "QObject|"
1209 msgid "PDF Document (*.pdf)"
1210 msgstr ""
1211
1212 #: analitzaplot/plotter3d_es.cpp:534
1213 msgctxt "QObject|"
1214 msgid "X3D Document (*.x3d)"
1215 msgstr ""
1216
1217 #: analitzaplot/plotter3d_es.cpp:534
1218 msgctxt "QObject|"
1219 msgid "STL Document (*.stl)"
1220 msgstr ""
1221
1222 #: analitzaplot/private/backends/cartesiancurve.cpp:64
1223 msgctxt "Function type|"
1224 msgid "Plane Curve F(y)"
1225 msgstr ""
1226
1227 #: analitzaplot/private/backends/cartesiancurve.cpp:80
1228 msgctxt "Function type|"
1229 msgid "Plane Curve F(x)"
1230 msgstr ""
1231
1232 #: analitzaplot/private/backends/cartesiancurve.cpp:137
1233 #: analitzaplot/private/backends/cartesiancurve.cpp:245
1234 msgctxt "QCoreApplication|"
1235 msgid "We can only draw Real results."
1236 msgstr "Kun reelle resultater kan tegnes."
1237
1238 #: analitzaplot/private/backends/cartesiancurve.cpp:248
1239 #: analitzawidgets/plotsview2d.cpp:236
1240 #, qt-format
1241 msgctxt "QCoreApplication|"
1242 msgid "x=%1 y=%2"
1243 msgstr "x=%1 y=%2"
1244
1245 #: analitzaplot/private/backends/cartesiansurface.cpp:52
1246 msgctxt "Function type|"
1247 msgid "Surface z=F(x,y)"
1248 msgstr ""
1249
1250 #: analitzaplot/private/backends/cartesiansurface.cpp:94
1251 msgctxt "Function type|"
1252 msgid "Surface y=F(x,z)"
1253 msgstr ""
1254
1255 #: analitzaplot/private/backends/cartesiansurface.cpp:127
1256 msgctxt "Function type|"
1257 msgid "Surface x=F(y,z)"
1258 msgstr ""
1259
1260 #: analitzaplot/private/backends/cylindricalsurface.cpp:37
1261 msgctxt "Function type|"
1262 msgid "Cylindrical Surface z=F(r: Radial, p: Polar)"
1263 msgstr ""
1264
1265 #: analitzaplot/private/backends/implicitcurve.cpp:44
1266 msgctxt "Function type|"
1267 msgid "Implicit Curve"
1268 msgstr ""
1269
1270 #: analitzaplot/private/backends/implicitpolarcurve.cpp:37
1271 msgctxt "Function type|"
1272 msgid "Polar implicit Curve 0=F(r: Radial, p: Polar)"
1273 msgstr ""
1274
1275 #: analitzaplot/private/backends/implicitsurface.cpp:35
1276 msgctxt "Function type|"
1277 msgid "Implicit Surface"
1278 msgstr ""
1279
1280 #: analitzaplot/private/backends/parametriccurve2d.cpp:37
1281 msgctxt "Function type|"
1282 msgid "Parametric Curve 2D"
1283 msgstr ""
1284
1285 #: analitzaplot/private/backends/parametriccurve3d.cpp:31
1286 msgctxt "Function type|"
1287 msgid "Parametric Curve 3D"
1288 msgstr ""
1289
1290 #: analitzaplot/private/backends/parametricsurface.cpp:32
1291 msgctxt "Function type|"
1292 msgid "Parametric Surface"
1293 msgstr ""
1294
1295 #: analitzaplot/private/backends/polarcurve.cpp:37
1296 msgctxt "Function type|"
1297 msgid "Polar Curve r=F(p: Polar)"
1298 msgstr ""
1299
1300 #: analitzaplot/private/backends/sphericalsurface.cpp:35
1301 msgctxt "Function type|"
1302 msgid "Spherical Surface Radial=F(t:Azimuth, p: Polar)"
1303 msgstr ""
1304
1305 #: analitzawidgets/expressionedit.cpp:295
1306 #, qt-format
1307 msgctxt "QCoreApplication|"
1308 msgid "Result: %1"
1309 msgstr "Resultat: %1"
1310
1311 #: analitzawidgets/expressionedit.cpp:405
1312 msgctxt "QCoreApplication|"
1313 msgid "To Expression"
1314 msgstr "Til udtryk"
1315
1316 #: analitzawidgets/expressionedit.cpp:407
1317 msgctxt "QCoreApplication|"
1318 msgid "To MathML"
1319 msgstr "Til MathML"
1320
1321 #: analitzawidgets/expressionedit.cpp:409
1322 msgctxt "QCoreApplication|"
1323 msgid "Simplify"
1324 msgstr "Simplificér"
1325
1326 #: analitzawidgets/expressionedit.cpp:411
1327 msgctxt "QCoreApplication|"
1328 msgid "Examples"
1329 msgstr "Eksempler"
1330
1331 #: analitzawidgets/plotsview2d.cpp:214
1332 msgctxt "QCoreApplication|"
1333 msgid "Selected viewport too small"
1334 msgstr "Det valgte visningsområde er for lille"
1335
1336 #~ msgctxt "NAME OF TRANSLATORS"
1337 #~ msgid "Your names"
1338 #~ msgstr "Martin Schlander"
1339
1340 #~ msgctxt "EMAIL OF TRANSLATORS"
1341 #~ msgid "Your emails"
1342 #~ msgstr "mschlander@opensuse.org"
1343
1344 #~ msgctxt "Parameter in function prototype"
1345 #~ msgid "par%1"
1346 #~ msgstr "par%1"
1347
1348 #~ msgctxt "Function parameter separator"
1349 #~ msgid ", "
1350 #~ msgstr ", "
1351
1352 #, fuzzy
1353 #~| msgid "Hyperbolic secant"
1354 #~ msgctxt "dictionary"
1355 #~ msgid "Hiperbola"
1356 #~ msgstr "Hyberbolsk sekant"
1357
1358 #~ msgid "Function type not correct for functions depending on %1"
1359 #~ msgstr "Funktionstype ikke korrekt for funktioner der afhænger af %1"
1360
1361 #~ msgctxt ""
1362 #~ "This function can't be represented as a curve. To draw implicit curve, "
1363 #~ "the function has to satisfy the implicit function theorem."
1364 #~ msgid "Implicit function undefined in the plane"
1365 #~ msgstr "Implicit funktion udefineret i planet"
1366
1367 #~ msgid "center"
1368 #~ msgstr "centrér"
1369
1370 #~ msgctxt "@title:column"
1371 #~ msgid "Function"
1372 #~ msgstr "Funktion"
1373
1374 #~ msgid "%1 function added"
1375 #~ msgstr "Funktionen %1 tilføjet"
1376
1377 #~ msgid "Hide '%1'"
1378 #~ msgstr "Skjul \"%1\""
1379
1380 #~ msgid "Show '%1'"
1381 #~ msgstr "Vis \"%1\""
1382
1383 #~ msgid "Remove '%1'"
1384 #~ msgstr "Fjern \"%1\""
1385
1386 #~ msgctxt "Error message"
1387 #~ msgid "Unknown token %1"
1388 #~ msgstr "Ukendt symbol %1"